Efficient Junction Temperature Estimation of SiC Power Modules Based on Temperature-Dependent Lumped Thermal Model
The DOI matches its Crossref record; 43 of the 44 references it cites were found in a registry or an index.
Abstract
Silicon carbide (SiC) power modules exhibit superior performance at high temperatures compared to silicon counterparts, and their thermal performance at such high temperature is significantly influenced by the properties of temperature-dependent materials. A junction temperature estimation based on the electrothermal coupling effect becomes significantly inefficient due to step-by-step updates of the temperature-dependent thermal parameters in iteration calculation. Thus, this article proposes an efficient estimation approach to estimate the junction temperature of multichip SiC power modules. A 3-D lumped thermal model (LTM) is developed, incorporating temperature-dependent thermal parameters in its nonlinear state-space equations. Dynamic thermal curves from finite element (FE) simulation are utilized to accurately identify these nonlinear thermal parameters via an adaptive particle swarm optimization (APSO) algorithm. In particular, the nonlinear state-space equations are effectively solved by the trapezoidal rule-backward differentiationformula 2(TR-BDF2) method, which implements calculations in two stages between the trapezoidal rule (TR) and backward differentiation formula (BDF2), leading to enhanced stability and a significant reduction in computation time. The proposed method achieves a computational speed of 1948 times faster than the conventional Runge-Kutta (R-K) method. The computational errors are within approximately$1~^{\circ }$C, experimentally confirming that the proposed approach is superior in the efficient and accurate estimation of junction temperature at high temperatures.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Thermal stress accounts for approximately 60% of primary failure causes [67], and accurate estimation of junction temperature ( T j ) is essential for reliable lifetime prediction.”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [67]
Citations
Cites
A Survey of Wide Bandgap Power Semiconductor Devices
Millán, J., Godignon, P., Perpiñà, X., Pérez-Tomás, A., & Rebollo, J. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2268900 · Cited by 2,685 · cited 1×
“Silicon carbide (SiC) power modules have gained popularity in power conversion due to their superior in high-temperature operation, fast switching, and low resistance [5], [6], [7].”
Review of Silicon Carbide Power Devices and Their Applications
She, X., Huang, A. Q., Lucia, O., & Ozpineci, B. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2652401 · Cited by 1,773 · cited 1×
“Silicon carbide (SiC) power modules have gained popularity in power conversion due to their superior in high-temperature operation, fast switching, and low resistance [5], [6], [7].”
Transitioning to Physics-of-Failure as a Reliability Driver in Power Electronics
Wang, H., Liserre, M., Blaabjerg, F., de Place Rimmen, P., Jacobsen, J. B., Kvisgaard, T., & Landkildehus, J. (2014) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2290282 · Cited by 693 · cited 1×
“However, it is noted that nearly 60% of failures in power devices can be attributed to elevated junction temperatures [8], [9].”
Ma, K., Liserre, M., Blaabjerg, F., & Kerekes, T. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2312335 · Cited by 460 · cited 1×
“I N RECENT years, power modules have been widely utilized in power electronics application fields, such as new energy power generation [1], [2], electric vehicles [3], and railway traction [4].”
Gu, B., Dominic, J., Lai, J.-S., Chen, C.-L., LaBella, T., & Chen, B. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2214237 · Cited by 363 · cited 1×
“I N RECENT years, power modules have been widely utilized in power electronics application fields, such as new energy power generation [1], [2], electric vehicles [3], and railway traction [4].”
Ji, B., Pickert, V., Cao, W., & Zahawi, B. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2251358 · Cited by 329 · cited 1×
“I N RECENT years, power modules have been widely utilized in power electronics application fields, such as new energy power generation [1], [2], electric vehicles [3], and railway traction [4].”
Power Electronic Transformer-Based Railway Traction Systems: Challenges and Opportunities
Feng, J., Chu, W. Q., Zhang, Z., & Zhu, Z. Q. (2017) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2017.2685464 · Cited by 229 · cited 1×
“I N RECENT years, power modules have been widely utilized in power electronics application fields, such as new energy power generation [1], [2], electric vehicles [3], and railway traction [4].”
Frequency-Domain Thermal Modeling and Characterization of Power Semiconductor Devices
Ma, K., He, N., Liserre, M., & Blaabjerg, F. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2509506 · Cited by 193 · cited 1×
“The Foster model can be extracted from the transient thermal impedance, which is usually accessible from the device datasheet or thermal impedance measurement, while the Cauer model is available based on the physics of device geometry and material property [14], [15].”
Power Electronics Based on Wide-Bandgap Semiconductors: Opportunities and Challenges
Iannaccone, G., Sbrana, C., Morelli, I., & Strangio, S. (2021) · IEEE Access · doi:10.1109/access.2021.3118897 · Cited by 176 · cited 1×
“Silicon carbide (SiC) power modules have gained popularity in power conversion due to their superior in high-temperature operation, fast switching, and low resistance [5], [6], [7].”
Application of Kalman Filter to Estimate Junction Temperature in IGBT Power Modules
Eleffendi, M. A., & Johnson, C. M. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2418711 · Cited by 175 · cited 1×
“In contrast, the RC lumped thermal models (LTMs), namely, the Foster model [12] and the Cauer model [13], are superior in high computational efficiency.”
Parameter Estimation of Power Electronic Converters With Physics-Informed Machine Learning
Zhao, S., Peng, Y., Zhang, Y., & Wang, H. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3176468 · Cited by 158 · cited 1×
“K) method [35], [44], for comparison.”
Accurate Temperature Estimation of SiC Power mosfets Under Extreme Operating Conditions
Tsibizov, A., Kovacevic-Badstubner, I., Kakarla, B., & Grossner, U. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2917221 · Cited by 134 · cited 2×
“D temperature-dependent Cauer model of the SiC power module is proposed in [29] and [30].”
A Temperature-Dependent Thermal Model of IGBT Modules Suitable for Circuit-Level Simulations
Wu, R., Wang, H., Pedersen, K. B., Ma, K., Ghimire, P., Iannuzzo, F., & Blaabjerg, F. (2016) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2540614 · Cited by 125
Ma, M., Guo, W., Yan, X., Yang, S., Zhang, X., Chen, W., & Cai, G. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2991926 · Cited by 119 · cited 1×
“A two-step parameter extraction (TPE) method is developed to identify the thermal parameters by using multiple thermal response curves [22].”
Transient simulation of silicon devices and circuits
Bank, R. E., Coughran, W. M., Fichtner, W., Grosse, E. H., Rose, D. J., & Smith, R. K. (1985) · IEEE Transactions on Electron Devices · doi:10.1109/t-ed.1985.22232 · Cited by 118
A Physics-Based Improved Cauer-Type Thermal Equivalent Circuit for IGBT Modules
Wang, Z., & Qiao, W. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2539208 · Cited by 106 · cited 1×
“The Foster model can be extracted from the transient thermal impedance, which is usually accessible from the device datasheet or thermal impedance measurement, while the Cauer model is available based on the physics of device geometry and material property [14], [15].”
A Physical RC Network Model for Electrothermal Analysis of a Multichip SiC Power Module
Li, J., Castellazzi, A., Eleffendi, M. A., Gurpinar, E., Johnson, C. M., & Mills, L. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2697959 · Cited by 105 · cited 1×
“D Foster and Cauer models are further developed [19], [20], [21].”
Ceccarelli, L., Kotecha, R. M., Bahman, A. S., Iannuzzo, F., & Mantooth, H. A. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2893636 · Cited by 98 · cited 1×
“D Foster and Cauer models are further developed [19], [20], [21].”
Yang, X., Heng, K., Dai, X., Wu, X., & Liu, G. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2021.3128017 · Cited by 86 · cited 1×
“D temperature-dependent Foster and Cauer models are proposed [25], [26], [27], [28], [29], [30], [31].”
Chen, M., Wang, H., Pan, D., Wang, X., & Blaabjerg, F. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.2984586 · Cited by 83 · cited 3×
“In addition, the influence of boundary conditions was quantified in a temperature-and boundary-dependent Cauer model [31].”
Monitoring 3-D Temperature Distributions and Device Losses in Power Electronic Modules
van der Broeck, C. H., Lorenz, R. D., & Doncker, R. W. D. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2882402 · Cited by 81 · cited 1×
“D finite element (FE) model [10] and finite-difference (FD) model [11] accurately predict junction temperatures.”
Nonlinear Compact Thermal Model of Power Semiconductor Devices
Górecki, K., & Zarebski, J. (2010) · IEEE Transactions on Components and Packaging Technologies · doi:10.1109/tcapt.2010.2052052 · Cited by 64 · cited 1×
“D temperature-dependent Foster and Cauer models are proposed [25], [26], [27], [28], [29], [30], [31].”
An Improved Cauer Model of IGBT Module: Inclusive Void Fraction in Solder Layer
Du, M., Guo, Q., Wang, H., Ouyang, Z., & Wei, K. (2020) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2020.3010064 · Cited by 52 · cited 1×
“In contrast, the RC lumped thermal models (LTMs), namely, the Foster model [12] and the Cauer model [13], are superior in high computational efficiency.”
Circuit-Based Electrothermal Modeling of SiC Power Modules With Nonlinear Thermal Models
Race, S., Philipp, A., Nagel, M., Ziemann, T., Kovacevic-Badstuebner, I., & Großner, U. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3147688 · Cited by 51 · cited 2×
“Taking the thermal capacity into account, a temperature-dependent model for SiC power modules is further proposed by using the FD method [33].”
A Digital-Twin-Based Health Status Monitoring Method for Single-Phase PWM Rectifiers
Zhang, S., Song, W., Cao, H., Tang, T., & Yuchao, Z. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3307415 · Cited by 48 · cited 3×
“K) method [35], [44], for comparison.”
Heng, K., Yang, X., Wu, X., Ye, J., & Liu, G. (2022) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2022.3185951 · Cited by 43 · cited 2×
“D temperature-dependent Cauer model of the SiC power module is proposed in [29] and [30].”
Reliability issues of SiC power MOSFETs toward high junction temperature operation
Tanimoto, S., & Ohashi, H. (2009) · physica status solidi (a) · doi:10.1002/pssa.200925167 · Cited by 42 · cited 1×
“However, it is noted that nearly 60% of failures in power devices can be attributed to elevated junction temperatures [8], [9].”
A fast electro-thermal co-simulation modeling approach for SiC power MOSFETs
Ceccarelli, L., Bahman, A. S., Iannuzzo, F., & Blaabjerg, F. (2017) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2017.7930813 · Cited by 36 · cited 2×
“D second-order Foster model [28].”
Lu, Y., Xiang, E., Jin, Y., Luo, H., Yang, H., Li, W., & Zhao, R. (2024) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2024.3355715 · Cited by 34 · cited 3×
“D Cauer model for IGBT modules has also been developed by using the TPE method [34], but it does not solve the problem of time-consuming calculation of junction temperature after considering the temperature-dependent effect.”
InfluentialUnconditionally Strong Stability Preserving Extensions of the TR-BDF2 Method
Bonaventura, L., & Rocca, A. D. (2016) · Journal of Scientific Computing · doi:10.1007/s10915-016-0267-9 · Cited by 31 · cited 1×
“Numerous studies have demonstrated that the TR-BDF2 method is L-stable, and thus, the stability will not be proven in this article [40], [41], [42].”
Zhan, C., Zhu, L., Wang, W., Jiao, Q., Zhang, Y., & Ji, S. (2022) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2022.3221621 · Cited by 30 · cited 4×
“Besides, optimization algorithms are incorporated into the identification process [23], allowing for the extraction of thermal parameters through one-time thermal response simulation, thus enhancing efficiency compared to the TPE method.”
InfluentialSelf-citationMeasurement of Thermal Parameters of SiC MOSFET Module by Case Temperature
Zheng, S., Du, X., Zhang, J., Yu, Y., & Sun, P. (2019) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2943737 · Cited by 29 · cited 1×
“D Foster and Cauer models have already been utilized for the evaluation of long-term thermal profiles of SiC power modules [16], [17], [18].”
Electrical parasitics and thermal modeling for optimized layout design of high power SiC modules
Bahman, A. S., Blaabjerg, F., Dutta, A., & Mantooth, A. (2016) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2016.7468292 · Cited by 26 · cited 1×
“D Foster and Cauer models have already been utilized for the evaluation of long-term thermal profiles of SiC power modules [16], [17], [18].”
Wang, B., Wang, L., Wu, S., Hou, Z., Mu, W., Yang, F., Liu, J., & Gan, Y. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2021.3138744 · Cited by 24 · cited 1×
“D finite element (FE) model [10] and finite-difference (FD) model [11] accurately predict junction temperatures.”
Acharya, S., She, X., Todorovic, M. H., Datta, R., & Mandrusiak, G. D. (2018) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2018.2879028 · Cited by 23 · cited 1×
“D Foster and Cauer models have already been utilized for the evaluation of long-term thermal profiles of SiC power modules [16], [17], [18].”
Decomposition and electro-physical model creation of the CREE 1200V, 50A 3-Ph SiC module
Morgan, A. J., Xu, Y., Hopkins, D. C., Husain, I., & Yu, W. (2016) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2016.7468163 · Cited by 22 · cited 1×
“The FE thermal model, whose structure diagram and structure size [32], [43] are shown in Fig.”
Chen, M., Wang, H., Blaabjerg, F., Wang, X., & Pan, D. (2018) · IEEE Annual Southern Power Electronics Conference · doi:10.1109/spec.2018.8636024 · Cited by 16 · cited 1×
“However, these Foster and Cauer models only include constant thermal resistance and capacitance, underestimating the junction temperature in high-temperature applications [24].”
Gou, Y., Zhuo, F., Wang, F., Yu, K., Zhan, C., & Xia, B. (2023) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2023.3313492 · Cited by 11 · cited 3×
“The FE thermal model, whose structure diagram and structure size [32], [43] are shown in Fig.”
Self-citationAn analysis of the TR-BDF2 integration scheme
Dharmaraja, S. K. (2009) · Cited by 10
Accurate second-order interpolation for power electronic circuit simulation
Tant, J., & Driesen, J. (2017) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/compel.2017.8013336 · Cited by 9 · cited 1×
“To reduce the computational burden introduced by temperature-dependent parameters, the trape-zoidal rule-backward differentiation formula 2 (TR-BDF2) method [36], [37], [38] is proposed first to solve nonlinear state-space equations of LTM.”
The TR-BDF2 method for second order problems in structural mechanics
Bonaventura, L., & Mármol, M. G. (2021) · Computers & Mathematics with Applications · doi:10.1016/j.camwa.2021.03.037 · Cited by 9
A Novel Approach of Electrothermal Modeling for Multichip Power Modules
Zhou, Z., Yu, J., Ge, X., Duan, J., Luo, C., & Lin, C. (2022) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce50734.2022.9947414 · Cited by 6 · cited 1×
“D Foster and Cauer models are further developed [19], [20], [21].”
Abraham, F., Pandey, M. K., & Kannan, K. (2020) · International Journal for Computational Methods in Engineering Science and Mechanics · doi:10.1080/15502287.2020.1719237 · Cited by 3 · cited 1×
“To reduce the computational burden introduced by temperature-dependent parameters, the trape-zoidal rule-backward differentiation formula 2 (TR-BDF2) method [36], [37], [38] is proposed first to solve nonlinear state-space equations of LTM.”
Research works printed but not linked: 1
- 2018, Silicon Carbide Power Modules
Cited by
Han, G., Kim, J., Park, S., & Bae, W. (2025) · Electronics · doi:10.3390/electronics14214193 · Cited by 34
“Thermal stress accounts for approximately 60% of primary failure causes [67], and accurate estimation of junction temperature ( T j ) is essential for reliable lifetime prediction.”
Kalay, M. Ş., & Akpolat, A. N. (2025) · IET Renewable Power Generation · doi:10.1049/rpg2.70111 · Cited by 19
Guo, C., Zhu, Y., & Tong, L. (2025) · Results in Engineering · doi:10.1016/j.rineng.2025.106072 · Cited by 11
Tang, Y., Zhan, C., Zhu, L., Zhao, Z., Zhao, K., & Ji, S. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3611030 · Cited by 7
“Existing PMST estimation methods mainly include optical methods, lumped thermal models (LTMs), and numerical methods [6], [7], [8].”
Self-citationKuang, K., Kuang, J.-J., & Chen, Y. (2025) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2025.3603737 · Cited by 4
“…limitations, some researchers have begun to adopt lumped thermal network (LTN) models—commonly used in the thermal analysis of power modules [12], [13] and electrical machines [14], [15]—for capacitor thermal modeling: Wang et al. [16] proposed a superposition-based LTN model to evaluate…”
Metadata
- Authors
- Tang, Y., Zhan, C., Zhu, L., Wang, W., Gou, Y., & Ji, S.
- Affiliations
- State Key Laboratory of Electrical Insulation and Power Equipment (CN)
- Virginia Tech (US)
- Venue
- IEEE Journal of Emerging and Selected Topics in Power Electronics
- Published
- 2025-06
- Volume
- 13
- Issue
- 3
- Pages
- 2799-2810
- ISSN
- 2168-6777 (ISSN-L)
- 2168-6785
- OpenAlex
- W4402978948
- Cited by
- 18
- References
- 44
- Citations by year
- 2026: 10 · 2025: 8
- FWCI
- 1.86
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE Journal of Emerging and Selected Topics in Power Electronics (publishedVersion)
- Funders
- National Key Research and Development Program of China “Remote Monitoring and Fault Diagnosis Technology for Offshore Wind Power Grid Connected Systems” (2023YFB2406900)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Thermal Analysis in Power Transmission
- Keywords
- junction temperature estimation, SiC power modules, lumped thermal model, electro-thermal coupling, multichip modules, adaptive particle swarm optimization
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.