The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Etch rates for micromachining processing-part II
Abstract
Samples of 53 materials that are used or potentially can be used or in the fabrication of microelectromechanical systems and integrated circuits were prepared: single-crystal silicon with two doping levels, polycrystalline silicon with two doping levels, polycrystalline germanium, polycrystalline SiGe, graphite, fused quartz, Pyrex 7740, nine other preparations of silicon dioxide, four preparations of silicon nitride, sapphire, two preparations of aluminum oxide, aluminum, Al/2%Si, titanium, vanadium, niobium, two preparations of tantalum, two preparations of chromium, Cr on Au, molybdenum, tungsten, nickel, palladium, platinum, copper, silver, gold, 10 Ti/90 W, 80 Ni/20 Cr, TiN, four types of photoresist, resist pen, Parylene-C, and spin-on polyimide. Selected samples were etched in 35 different etches: isotropic silicon etchant, potassium hydroxide, 10:1 HF, 5:1 BHF, Pad Etch 4, hot phosphoric acid, Aluminum Etchant Type A, titanium wet etchant, CR-7 chromium etchant, CR-14 chromium etchant, molybdenum etchant, warm hydrogen peroxide, Copper Etchant Type CE-200, Copper Etchant APS 100, dilute aqua regia, AU-5 gold etchant, Nichrome Etchant TFN, hot sulfuric+phosphoric acids, Piranha, Microstrip 2001, acetone, methanol, isopropanol, xenon difluoride, HF+H2O vapor, oxygen plasma, two deep reactive ion etch recipes with two different types of wafer clamping, SF6plasma, SF6+O2plasma, CF4plasma, CF4+O2plasma, and argon ion milling. The etch rates of 620 combinations of these were measured. The etch rates of thermal oxide in different dilutions of HF and BHF are also reported. Sample preparation and information about the etches is given.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
CRC Handbook of Chemistry and Physics
(2016) · CRC Press eBooks · doi:10.1201/9781315380476 · Cited by 13,921
Seidel, H., Csepregi, L., Heuberger, A., & Baumgärtel, H. (1990) · Journal of The Electrochemical Society · doi:10.1149/1.2086277 · Cited by 1,633
The chemical elements and their compounds
Sidwick, N. V. (1950) · Journal of Chemical Education · doi:10.1021/ed027p529 · Cited by 887
Etch rates for micromachining processing
Williams, K. R., & Muller, R. S. (1996) · Journal of Microelectromechanical Systems · doi:10.1109/84.546406 · Cited by 646
Self-citationAnisotropic Etching of Crystalline Silicon in Alkaline Solutions: II . Influence of Dopants
Seidel, H., Csepregi, L., Heuberger, A., & Baumgärtel, H. (1990) · Journal of The Electrochemical Society · doi:10.1149/1.2086278 · Cited by 385
Chemical Etching of Silicon: IV . Etching Technology
Schwartz, B., & Robbins, H. (1976) · Journal of The Electrochemical Society · doi:10.1149/1.2132721 · Cited by 354
CRC Handbook of Metal Etchants
(1990) · CRC Press eBooks · doi:10.1201/9781439822531 · Cited by 184
ChemInform Abstract: CHEMICAL ETCHING OF SILICON. IV. ETCHING TECHNOLOGY
Schwartz, B., & Robbins, H. (1977) · ChemInform · doi:10.1002/chin.197711010 · Cited by 35
Cited by
Kaltenbrunner, M., Adam, G., Głowacki, E. D., Drack, M., Schwödiauer, R., Leonat, L., Apaydin, D. H., Groiss, H., Scharber, M. C., White, M. S., et al. (2015) · Nature Materials · doi:10.1038/nmat4388 · Cited by 1,024
Covalent Surface Modification of Oxide Surfaces
Pujari, S. P., Scheres, L., Marcelis, A. T. M., & Zuilhof, H. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201306709 · Cited by 934
Plasma etching: Yesterday, today, and tomorrow
Donnelly, V. M., & Kornblit, A. (2013) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.4819316 · Cited by 880
Cantilever-like micromechanical sensors
Boisen, A., Dohn, S., Keller, S. S., Schmid, S., & Tenje, M. (2011) · Reports on Progress in Physics · doi:10.1088/0034-4885/74/3/036101 · Cited by 566
Single molecule sensing with solid-state nanopores: novel materials, methods, and applications
Miles, B. N., Ivanov, A. P., Wilson, K. A., Doğan, F., Japrung, D., & Edel, J. B. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35286a · Cited by 499
Diffraction phase microscopy: principles and applications in materials and life sciences
Bhaduri, B., Edwards, C., Pham, H., Zhou, R., Nguyen, T. H., Goddard, L. L., & Popescu, G. (2014) · Advances in Optics and Photonics · doi:10.1364/aop.6.000057 · Cited by 425
Recent Developments in Polymer MEMS
Liu, C. (2007) · Advanced Materials · doi:10.1002/adma.200701709 · Cited by 422
A practical guide for the fabrication of microfluidic devices using glass and silicon
Iliescu, C., Taylor, H., Avram, M., Miao, J., & Franssila, S. (2012) · Biomicrofluidics · doi:10.1063/1.3689939 · Cited by 385
The use of atomic layer deposition in advanced nanopatterning
Mackus, A. J. M., Bol, A. A., & Kessels, W. M. M. (2014) · Nanoscale · doi:10.1039/c4nr01954g · Cited by 380
Gold cleaning methods for electrochemical detection applications
Fischer, L. M., Tenje, M., Heiskanen, A. R., Masuda, N., Castillo, J., Bentien, A., Émneus, J., Jakobsen, M. H., & Boisen, A. (2009) · Microelectronic Engineering · doi:10.1016/j.mee.2008.11.045 · Cited by 337
Self‐Cleaning and Anti‐Fog Surfaces via Stimuli‐Responsive Polymer Brushes
Howarter, J. A., & Youngblood, J. P. (2007) · Advanced Materials · doi:10.1002/adma.200700156 · Cited by 283
Complete Corrosion Inhibition through Graphene Defect Passivation
Hsieh, Y.-P., Hofmann, M., Chang, K.-W., Jhu, J. G., Li, Y.-Y., Chen, K. Y., Yang, C. C., Chang, W.-S., & Chen, L.-C. (2014) · ACS Nano · doi:10.1021/nn404756q · Cited by 264
Self‐Cleaning and Next Generation Anti‐Fog Surfaces and Coatings
Howarter, J. A., & Youngblood, J. P. (2008) · Macromolecular Rapid Communications · doi:10.1002/marc.200700733 · Cited by 260
Materials and Fabrication Processes for Transient and Bioresorbable High‐Performance Electronics
Hwang, S., Kim, D., Tao, H., Kim, T., Kim, S., Yu, K. J., Panilaitis, B., Jeong, J., Song, J., Omenetto, F. G., et al. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201300127 · Cited by 256
Design and Microfabrication Considerations for Reliable Flexible Intracortical Implants
Sohal, H. S., Vassilevski, K., Jackson, A., Baker, S. N., & O’Neill, A. (2016) · Frontiers in Mechanical Engineering · doi:10.3389/fmech.2016.00005 · Cited by 4
“6 chronic degradation of the metal due to electrochemistry, a further design measure used to enhance probe longevity [27].”
Background
Metadata
- Authors
- Williams, K. R., Gupta, K., & Wasilik, M.
- Venue
- Journal of Microelectromechanical Systems
- Published
- 2003-12
- Volume
- 12
- Issue
- 6
- Pages
- 761-778
- ISSN
- 1057-7157 (ISSN-L)
- OpenAlex
- W2154281786
- Cited by
- 1,027
- References
- 8
- FWCI
- 13.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.