The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Piezoelectric MEMS Energy Harvester for Low-Frequency Vibrations With Wideband Operation Range and Steadily Increased Output Power
Abstract
A piezoelectric MEMS energy harvester (EH) with low resonant frequency and wide operation bandwidth was designed, microfabricated, and characterized. The MEMS piezoelectric energy harvesting cantilever consists of a silicon beam integrated with piezoelectric thin film (PZT) elements parallel-arranged on top and a silicon proof mass resulting in a low resonant frequency of 36 Hz. The whole chip was assembled onto a metal carrier with a limited spacer such that the operation frequency bandwidth can be widened to 17 Hz at the input acceleration of 1.0 g during frequency up-sweep. Load voltage and power generation for different numbers of PZT elements in series and in parallel connections were compared and discussed based on experimental and simulation results. Moreover, the EH device has a wideband and steadily increased power generation from 19.4 nW to 51.3 nW within the operation frequency bandwidth ranging from 30 Hz to 47 Hz at 1.0 g. Based on theoretical estimation, a potential output power of 0.53 μW could be harvested from low and irregular frequency vibrations by adjusting the PZT pattern and spacer thickness to achieve an optimal design.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Energy harvesting vibration sources for microsystems applications
Beeby, S. P., Tudor, M. J., & White, N. M. (2006) · Measurement Science and Technology · doi:10.1088/0957-0233/17/12/r01 · Cited by 3,008
A study of low level vibrations as a power source for wireless sensor nodes
Roundy, S., Wright, P. K., & Rabaey, J. (2003) · Computer Communications · doi:10.1016/s0140-3664(02)00248-7 · Cited by 2,819
A review of power harvesting using piezoelectric materials (2003–2006)
Anton, S. R., & Sodano, H. A. (2007) · Smart Materials and Structures · doi:10.1088/0964-1726/16/3/r01 · Cited by 2,652
Energy Harvesting From Human and Machine Motion for Wireless Electronic Devices
Mitcheson, P. D., Yeatman, E. M., Rao, G. K., Holmes, A. S., & Green, T. C. (2008) · Proceedings of the IEEE · doi:10.1109/jproc.2008.927494 · Cited by 1,888 · cited 1×
“Therefore, energy harvesting technique which is used to collect and convert ambient energy into usable electrical power has been considered as a promising solution and has attracted noticeable research interests [1]–[4].”
BackgroundA piezoelectric vibration based generator for wireless electronics
Roundy, S., & Wright, P. K. (2004) · Smart Materials and Structures · doi:10.1088/0964-1726/13/5/018 · Cited by 1,818
Erturk, A., & Inman, D. J. (2009) · Smart Materials and Structures · doi:10.1088/0964-1726/18/2/025009 · Cited by 1,417
Analysis of a micro-electric generator for microsystems
Williams, C. B., & Yates, R. B. (1996) · Sensors and Actuators A: Physical · doi:10.1016/0924-4247(96)80118-x · Cited by 1,407
Cook-Chennault, K. A., Thambi, N., & Sastry, A. M. (2008) · Smart Materials and Structures · doi:10.1088/0964-1726/17/4/043001 · Cited by 1,241
Improving Power Output for Vibration-Based Energy Scavengers
Roundy, S., Leland, E. S., Baker, J., Carleton, E., Reilly, E., Lai, E., Otis, B., Rabaey, J. M., Sundararajan, V., & Wright, P. K. (2005) · IEEE Pervasive Computing · doi:10.1109/mprv.2005.14 · Cited by 1,031
Human-powered wearable computing
Starner, T. (1996) · IBM Systems Journal · doi:10.1147/sj.353.0618 · Cited by 876 · cited 1×
“Therefore, energy harvesting technique which is used to collect and convert ambient energy into usable electrical power has been considered as a promising solution and has attracted noticeable research interests [1]–[4].”
Background
Cited by
Liu, H., Zhong, J., Lee, C., Lee, S.-W., & Lin, L. (2018) · Applied Physics Reviews · doi:10.1063/1.5074184 · Cited by 905
Self-citationOn the Role of Nonlinearities in Vibratory Energy Harvesting: A Critical Review and Discussion
Daqaq, M. F., Masana, R., Erturk, A., & Dane Quinn, D. (2014) · Applied Mechanics Reviews · doi:10.1115/1.4026278 · Cited by 823
Development Trends and Perspectives of Future Sensors and MEMS/NEMS
Zhu, J., Liu, X., Shi, Q., He, T., Sun, Z., Guo, X., Liu, W., Sulaiman, O. B., Dong, B., & Lee, C. (2019) · Micromachines · doi:10.3390/mi11010007 · Cited by 443
Self-citationMicro electrostatic energy harvester with both broad bandwidth and high normalized power density
Zhang, Y., Wang, T., Luo, A., Hu, Y., Li, X., & Wang, F. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.12.053 · Cited by 423
Piezoelectric energy harvesting: State-of-the-art and challenges
Toprak, A., & Tigli, O. (2014) · Applied Physics Reviews · doi:10.1063/1.4896166 · Cited by 417
Bhavanasi, V., Kumar, V., Parida, K., Wang, J., & Lee, P. S. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b09502 · Cited by 387
Progress in TENG technology—A journey from energy harvesting to nanoenergy and nanosystem
Zhu, J., Zhu, M., Shi, Q., Wen, F., Liu, L., Dong, B., Haroun, A., Yang, Y., Vachon, P., Guo, X., et al. (2020) · EcoMat · doi:10.1002/eom2.12058 · Cited by 370
Self-citationRecent Progress on PZT Based Piezoelectric Energy Harvesting Technologies
Kang, M.-G., Jung, W.-S., Kang, C.-Y., & Yoon, S.-J. (2016) · Actuators · doi:10.3390/act5010005 · Cited by 273
“5 nW within the operation bandwidth from 30 Hz to 47 Hz [59,60].”
BackgroundWang, X., Yang, B., Liu, J., Zhu, Y., Yang, C., & He, Q. (2016) · Scientific Reports · doi:10.1038/srep36409 · Cited by 271
Shi, Q., Wang, T., & Lee, C. (2016) · Scientific Reports · doi:10.1038/srep24946 · Cited by 210
Self-citationShi, Q., Wang, T., Kobayashi, T., & Lee, C. (2016) · Applied Physics Letters · doi:10.1063/1.4948973 · Cited by 54
Self-citationLu, L., He, Y., Wang, T., Shi, T., & Ruan, Y. (2019) · IEEE Access · doi:10.1109/access.2019.2936228 · Cited by 35
Metadata
- Authors
- Liu, H., Tay, C. J., Quan, C., Kobayashi, T., & Lee, C.
- Venue
- Journal of Microelectromechanical Systems
- Published
- 2011-10
- Volume
- 20
- Issue
- 5
- Pages
- 1131-1142
- ISSN
- 1057-7157 (ISSN-L)
- 1941-0158
- OpenAlex
- W2167187517
- Cited by
- 361
- References
- 47
- FWCI
- 50.09
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.