The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Piezoelectric MEMS Energy Harvester for Low-Frequency Vibrations With Wideband Operation Range and Steadily Increased Output Power
Abstract
A piezoelectric MEMS energy harvester (EH) with low resonant frequency and wide operation bandwidth was designed, microfabricated, and characterized. The MEMS piezoelectric energy harvesting cantilever consists of a silicon beam integrated with piezoelectric thin film (PZT) elements parallel-arranged on top and a silicon proof mass resulting in a low resonant frequency of 36 Hz. The whole chip was assembled onto a metal carrier with a limited spacer such that the operation frequency bandwidth can be widened to 17 Hz at the input acceleration of 1.0 g during frequency up-sweep. Load voltage and power generation for different numbers of PZT elements in series and in parallel connections were compared and discussed based on experimental and simulation results. Moreover, the EH device has a wideband and steadily increased power generation from 19.4 nW to 51.3 nW within the operation frequency bandwidth ranging from 30 Hz to 47 Hz at 1.0 g. Based on theoretical estimation, a potential output power of 0.53 μW could be harvested from low and irregular frequency vibrations by adjusting the PZT pattern and spacer thickness to achieve an optimal design.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Energy harvesting vibration sources for microsystems applications
Beeby, S. P., Tudor, M. J., & White, N. M. (2006) · Measurement Science and Technology · doi:10.1088/0957-0233/17/12/r01 · Cited by 3,008
A study of low level vibrations as a power source for wireless sensor nodes
Roundy, S., Wright, P. K., & Rabaey, J. (2003) · Computer Communications · doi:10.1016/s0140-3664(02)00248-7 · Cited by 2,819
A review of power harvesting using piezoelectric materials (2003–2006)
Anton, S. R., & Sodano, H. A. (2007) · Smart Materials and Structures · doi:10.1088/0964-1726/16/3/r01 · Cited by 2,652
Energy Harvesting From Human and Machine Motion for Wireless Electronic Devices
Mitcheson, P. D., Yeatman, E. M., Rao, G. K., Holmes, A. S., & Green, T. C. (2008) · Proceedings of the IEEE · doi:10.1109/jproc.2008.927494 · Cited by 1,888 · cited 1×
“Therefore, energy harvesting technique which is used to collect and convert ambient energy into usable electrical power has been considered as a promising solution and has attracted noticeable research interests [1]–[4].”
BackgroundA piezoelectric vibration based generator for wireless electronics
Roundy, S., & Wright, P. K. (2004) · Smart Materials and Structures · doi:10.1088/0964-1726/13/5/018 · Cited by 1,818
Erturk, A., & Inman, D. J. (2009) · Smart Materials and Structures · doi:10.1088/0964-1726/18/2/025009 · Cited by 1,417
Analysis of a micro-electric generator for microsystems
Williams, C. B., & Yates, R. B. (1996) · Sensors and Actuators A: Physical · doi:10.1016/0924-4247(96)80118-x · Cited by 1,407
Cook-Chennault, K. A., Thambi, N., & Sastry, A. M. (2008) · Smart Materials and Structures · doi:10.1088/0964-1726/17/4/043001 · Cited by 1,241
Improving Power Output for Vibration-Based Energy Scavengers
Roundy, S., Leland, E. S., Baker, J., Carleton, E., Reilly, E., Lai, E., Otis, B., Rabaey, J. M., Sundararajan, V., & Wright, P. K. (2005) · IEEE Pervasive Computing · doi:10.1109/mprv.2005.14 · Cited by 1,031
Human-powered wearable computing
Starner, T. (1996) · IBM Systems Journal · doi:10.1147/sj.353.0618 · Cited by 876 · cited 1×
“Therefore, energy harvesting technique which is used to collect and convert ambient energy into usable electrical power has been considered as a promising solution and has attracted noticeable research interests [1]–[4].”
BackgroundMEMS power generator with transverse mode thin film PZT
Jeon, Y. B., Sood, R., Jeong, J.-H., & Kim, S.-G. (2005) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2004.12.032 · Cited by 795
Analysis of power output for piezoelectric energy harvesting systems
Shu, Y. C., & Lien, I. C. (2006) · Smart Materials and Structures · doi:10.1088/0964-1726/15/6/001 · Cited by 737
A vibration energy harvesting device with bidirectional resonance frequency tunability
Challa, V. R., Prasad, M. G., Shi, Y., & Fisher, F. T. (2008) · Smart Materials and Structures · doi:10.1088/0964-1726/17/01/015035 · Cited by 675
Strategies for increasing the operating frequency range of vibration energy harvesters: a review
Zhu, D., Tudor, M. J., & Beeby, S. P. (2010) · Measurement Science and Technology · doi:10.1088/0957-0233/21/2/022001 · Cited by 664
Piezoelectric MEMS sensors: state-of-the-art and perspectives
Tadigadapa, S., & Mateti, K. (2009) · Measurement Science and Technology · doi:10.1088/0957-0233/20/9/092001 · Cited by 581
A review of vibration-based MEMS piezoelectric energy harvesters
Saadon, S., & Sidek, O. (2011) · Energy Conversion and Management · doi:10.1016/j.enconman.2010.07.024 · Cited by 509
Leland, E. S., & Wright, P. K. (2006) · Smart Materials and Structures · doi:10.1088/0964-1726/15/5/030 · Cited by 496
A MEMS-based piezoelectric power generator array for vibration energy harvesting
Liu, J.-Q., Fang, H.-B., Xu, Z.-Y., Mao, X.-H., Shen, X.-C., Chen, D., Liao, H., & Cai, B.-C. (2008) · Microelectronics Journal · doi:10.1016/j.mejo.2007.12.017 · Cited by 481
Fang, H.-B., Liu, J.-Q., Xu, Z.-Y., Dong, L., Wang, L., Chen, D., Cai, B.-C., & Liu, Y. (2006) · Microelectronics Journal · doi:10.1016/j.mejo.2006.07.023 · Cited by 479
Vibration energy harvesting with aluminum nitride-based piezoelectric devices
Elfrink, R., Kamel, T. M., Goedbloed, M., Matova, S., Hohlfeld, D., van Andel, Y., & van Schaijk, R. (2009) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/19/9/094005 · Cited by 460
Shen, D., Park, J.-H., Ajitsaria, J., Choe, S.-Y., Wikle, H. C., & Kim, D.-J. (2008) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/18/5/055017 · Cited by 407
An electromagnetic micro power generator for wideband environmental vibrations
Sari, I., Balkan, T., & Kulah, H. (2008) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2007.11.021 · Cited by 405
Electromagnetic energy harvesting from vibrations of multiple frequencies
Yang, B., Lee, C., Xiang, W., Xie, J., Han He, J., Kotlanka, R. K., Low, S. P., & Feng, H. (2009) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/19/3/035001 · Cited by 384
Self-citationKulah, H., & Najafi, K. (2008) · IEEE Sensors Journal · doi:10.1109/jsen.2008.917125 · Cited by 361
A wideband vibration-based energy harvester
Soliman, M. S. M., Abdel-Rahman, E. M., El-Saadany, E. F., & Mansour, R. R. (2008) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/18/11/115021 · Cited by 353
Energy harvesting MEMS device based on thin film piezoelectric cantilevers
Choi, W. J., Jeon, Y., Jeong, J.-H., Sood, R., & Kim, S. G. (2006) · Journal of Electroceramics · doi:10.1007/s10832-006-6287-3 · Cited by 336
Xue, H., Hu, Y., & Wang, Q.-M. (2008) · IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control · doi:10.1109/tuffc.903 · Cited by 311
Modeling and analysis of a bimorph piezoelectric cantilever beam for voltage generation
Ajitsaria, J., Choe, S. Y., Shen, D., & Kim, D. J. (2007) · Smart Materials and Structures · doi:10.1088/0964-1726/16/2/024 · Cited by 258
Sakane, Y., Suzuki, Y., & Kasagi, N. (2008) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/18/10/104011 · Cited by 251
Integrated power harvesting system including a MEMS generator and a power management circuit
Marzencki, M., Ammar, Y., & Basrour, S. (2008) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2007.10.073 · Cited by 246
Fabrication, modelling and characterization of MEMS piezoelectric vibration harvesters
Renaud, M., Karakaya, K., Sterken, T., Fiorini, P., Van Hoof, C., & Puers, R. (2008) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2007.11.005 · Cited by 239
Piezoelectric MEMS generators fabricated with an aerosol deposition PZT thin film
Lee, B. S., Lin, S. C., Wu, W. J., Wang, X. Y., Chang, P. Z., & Lee, C. K. (2009) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/19/6/065014 · Cited by 194
Self-citationModeling and Characterization of Piezoelectric $d_{33}$ -Mode MEMS Energy Harvester
Park, J. C., Park, J. Y., & Lee, Y.-P. (2010) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2010.2067431 · Cited by 164
Vibration Energy Harvesting with PZT Micro Device
Muralt, P., Marzencki, M., Belgacem, B., Calame, F., & Basrour, S. (2009) · Procedia Chemistry · doi:10.1016/j.proche.2009.07.297 · Cited by 162
Hybrid energy harvester based on piezoelectric and electromagnetic mechanisms
Yang, B. (2010) · Journal of Micro/Nanolithography, MEMS, and MOEMS · doi:10.1117/1.3373516 · Cited by 162
Fabrication and characterization of a wideband MEMS energy harvester utilizing nonlinear springs
Nguyen, D. S., Halvorsen, E., Jensen, G. U., & Vogl, A. (2010) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/20/12/125009 · Cited by 158
Design, fabrication and test of integrated micro-scale vibration-based electromagnetic generator
Kulkarni, S., Koukharenko, E., Torah, R. N., Tudor, J., Beeby, S., O’Donnell, T., & Roy, S. (2007) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2007.09.014 · Cited by 157
Sari, I., Balkan, T., & Külah, H. (2010) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2009.2037245 · Cited by 151
Zhu, M., Worthington, E., & Njuguna, J. (2009) · IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control · doi:10.1109/tuffc.2009.1187 · Cited by 133
Active frequency tuning for micro resonators by localized thermal stressing effects
Remtema, T., & Lin, L. (2001) · Sensors and Actuators A Physical · doi:10.1016/s0924-4247(01)00603-3 · Cited by 131
Performance limits of the three MEMS inertial energy generator transduction types
Mitcheson, P., Reilly, E. K., Toh, T. T., Wright, P. K., & Yeatman, E. M. (2007) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/17/9/s01 · Cited by 116
A FREQUENCY ADJUSTABLE VIBRATION ENERGY HARVESTER
Wu, X., Lin, J., Kato, S., Zhang, K., Ren, T., & Liu, L. (2008) · Cited by 107
A Design Procedure for Wideband Micropower Generators
Soliman, M., Abdel-Rahman, E. M., El-Saadany, E. F., & Mansour, R. R. (2009) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2009.2031695 · Cited by 88
Non-resonant electromagnetic wideband energy harvesting mechanism for low frequency vibrations
Yang, B. T., & Lee, C. (2010) · Microsystem Technologies · doi:10.1007/s00542-010-1059-z · Cited by 82
Self-citationModeling and characterization of MEMS-based piezoelectric harvesting devices
Kamel, T. M., Elfrink, R., Renaud, M., Hohlfeld, D., Goedbloed, M. H., de Nooijer, C., Jambunathan, M., & van Schaijk, R. T. F. (2010) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/20/10/105023 · Cited by 81
A micromachined, single-crystal silicon, tunable resonator
Yao, J., & MacDonald, N. C. (1995) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/5/3/009 · Cited by 79
Low-Resonant-Frequency Micro Electret Generator for Energy Harvesting Application
Edamoto, M., Suzuki, Y., Kasagi, N., Kashiwagi, K., Morizawa, Y., Yokoyama, T., Tetsuo, S. E. K. I., & Oba, M. (2009) · IEEE International Conference on Micro Electro Mechanical Systems (MEMS) · doi:10.1109/memsys.2009.4805569 · Cited by 52
Cited by
Liu, H., Zhong, J., Lee, C., Lee, S.-W., & Lin, L. (2018) · Applied Physics Reviews · doi:10.1063/1.5074184 · Cited by 905
Self-citationOn the Role of Nonlinearities in Vibratory Energy Harvesting: A Critical Review and Discussion
Daqaq, M. F., Masana, R., Erturk, A., & Dane Quinn, D. (2014) · Applied Mechanics Reviews · doi:10.1115/1.4026278 · Cited by 823
Development Trends and Perspectives of Future Sensors and MEMS/NEMS
Zhu, J., Liu, X., Shi, Q., He, T., Sun, Z., Guo, X., Liu, W., Sulaiman, O. B., Dong, B., & Lee, C. (2019) · Micromachines · doi:10.3390/mi11010007 · Cited by 443
Self-citationMicro electrostatic energy harvester with both broad bandwidth and high normalized power density
Zhang, Y., Wang, T., Luo, A., Hu, Y., Li, X., & Wang, F. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.12.053 · Cited by 423
Piezoelectric energy harvesting: State-of-the-art and challenges
Toprak, A., & Tigli, O. (2014) · Applied Physics Reviews · doi:10.1063/1.4896166 · Cited by 417
Metadata
- Authors
- Liu, H., Tay, C. J., Quan, C., Kobayashi, T., & Lee, C.
- Venue
- Journal of Microelectromechanical Systems
- Published
- 2011-10
- Volume
- 20
- Issue
- 5
- Pages
- 1131-1142
- ISSN
- 1057-7157 (ISSN-L)
- 1941-0158
- OpenAlex
- W2167187517
- Cited by
- 361
- References
- 47
- FWCI
- 50.09
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.