The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Thermal Modeling, Analysis, and Management in VLSI Circuits: Principles and Methods
Abstract
The growing packing density and power consumption of very large scale integration (VLSI) circuits have made thermal effects one of the most important concerns of VLSI designers. The increasing variability of key process parameters in nanometer CMOS technologies has resulted in larger impact of the substrate and metal line temperatures on the reliability and performance of the devices and interconnections. Recent data shows that more than 50% of all integrated circuit failures are related to thermal issues. This paper presents a brief discussion of key sources of power dissipation and their temperature relation in CMOS VLSI circuits, and techniques for full-chip temperature calculation with special attention to its implications on the design of high-performance, low-power VLSI circuits. The paper is concluded with an overview of techniques to improve the full-chip thermal integrity by means of off-chip versus on-chip and static versus adaptive methods
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fundamentals of Modern VLSI Devices
Taur, Y., & Ning, T. H. (2009) · Cambridge University Press eBooks · doi:10.1017/cbo9781139195065 · Cited by 2,922
Wattch: a framework for architectural-level power analysis and optimizations
Brooks, D., Tiwari, V., & Martonosi, M. (2000) · Proceedings of the 27th annual international symposium on Computer architecture - ISCA '00 · doi:10.1145/339647.339657 · Cited by 2,578
Electromigration—A brief survey and some recent results
Black, J. R. (1969) · IEEE Transactions on Electron Devices · doi:10.1109/t-ed.1969.16754 · Cited by 1,506
Wattch: a framework for architectural-level power analysis and optimizations
Brooks, D. M., Tiwari, V., & Martonosi, M. (2002) · doi:10.1109/isca.2000.854380 · Cited by 1,122
Short-circuit dissipation of static CMOS circuitry and its impact on the design of buffer circuits
Veendrick, H. J. M. (1984) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.1984.1052168 · Cited by 761
First-order incremental block-based statistical timing analysis
Visweswariah, C., Ravindran, K., Kalafala, K., Walker, S. G., & Narayan, S. (2004) · ACM/IEEE Design Automation Conference (DAC) · doi:10.1145/996566.996663 · Cited by 620
Policy optimization for dynamic power management
Benini, L., Bogliolo, A., Paleologo, G. A., & De Micheli, G. (1999) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/43.766730 · Cited by 433
Modeling and analysis of manufacturing variations
Nassif, S. (2002) · IEEE Custom Integrated Circuits Conference (CICC) · doi:10.1109/cicc.2001.929760 · Cited by 430
Srivastava, M. B., Chandrakasan, A. P., & Brodersen, R. W. (1996) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/92.486080 · Cited by 427
A predictive system shutdown method for energy saving of event-driven computation
Hwang, C.-H., & Wu, A. C.-H. (2000) · ACM Transactions on Design Automation of Electronic Systems · doi:10.1145/335043.335046 · Cited by 249
Online strategies for dynamic power management in systems with multiple power-saving states
Irani, S., Shukla, S., & Gupta, R. (2003) · ACM Transactions on Embedded Computing Systems · doi:10.1145/860176.860180 · Cited by 181
Dynamic power management using adaptive learning tree
Chung, E.-Y., Luca Benini, C., & Micheli, G. D. (1999) · doi:10.5555/339492.340026 · Cited by 158
Souri, S. J., Banerjee, K., Mehrotra, A. P., & Saraswat, K. C. (2000) · ACM/IEEE Design Automation Conference (DAC) · doi:10.1145/337292.337394 · Cited by 108
Interconnect thermal modeling for accurate simulation of circuit timing and reliability
Chen, D., Li, E., Rosenbaum, E., & Kang, S.-M. (2000) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/43.828548 · Cited by 104
Dynamic power management of complex systems using generalized stochastic Petri nets
Qiu, Q., Wu, Q. M. J., & Pedram, M. (2000) · Proceedings - ACM IEEE Design Automation Conference · doi:10.1145/337292.337438 · Cited by 93
Self-citationHierarchical Adaptive Dynamic Power Management
Ren, Z., Krogh, B. H., & Mărculescu, R. (2005) · IEEE Transactions on Computers · doi:10.1109/tc.2005.66 · Cited by 90
Fully coupled dynamic electro-thermal simulation
Digele, G., Lindenkreuz, S., & Kasper, E. (1997) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/92.609867 · Cited by 87
On-chip thermal gradient analysis and temperature flattening for SoC design
Sato, T. G., Ichimiya, J., Ono, N., et al. (2005) · Asia and South Pacific Design Automation Conference (ASP-DAC) · doi:10.1145/1120725.1120827 · Cited by 46
Hierarchical power management with application to scheduling
Rong, P., & Pedram, M. (2005) · International Symposium on Low Power Electronics and Design (ISLPED) · doi:10.1145/1077603.1077667 · Cited by 25
Self-citationEfficient transient electrothermal simulation of CMOS VLSI circuits under electrical overstress
Li, T., Tsai, C.-H., & Kang, S.-M. S. (1998) · International Conference on Computer Aided Design · doi:10.1145/288548.288553 · Cited by 17
Rong, P., & Pedram, M. (2006) · Design, Automation, and Test in Europe · doi:10.1109/date.2006.243981 · Cited by 17
Self-citationHierarchical power management with application to scheduling
Rong, P., & Pedram, M. (2005) · International Symposium on Low Power Electronics and Design (ISLPED) · doi:10.1109/lpe.2005.195526 · Cited by 3
Self-citation
Cited by
Nanoscale thermal transport. II. 2003–2012
Cahill, D. G., Braun, P. V., Chen, G., Clarke, D. R., Fan, S., Goodson, K. E., Keblinski, P., King, W. P., Mahan, G. D., Majumdar, A., et al. (2014) · Applied Physics Reviews · doi:10.1063/1.4832615 · Cited by 1,763
A critical review of traditional and emerging techniques and fluids for electronics cooling
Sohel Murshed, S. M., & Nieto de Castro, C. A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.04.112 · Cited by 987
Liu, Y., Zheng, R., & Li, J. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112783 · Cited by 276
Metadata
- Authors
- Pedram, M., & Nazarian, S.
- Venue
- Proceedings of the IEEE
- Published
- 2006-08
- Volume
- 94
- Issue
- 8
- Pages
- 1487-1501
- ISSN
- 0018-9219 (ISSN-L)
- 1558-2256
- OpenAlex
- W2035224686
- Cited by
- 530
- References
- 22
- FWCI
- 15.86
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.