A 2.8 GS/s 44.6 mW Time-Interleaved ADC Achieving 50.9 dB SNDR and 3 dB Effective Resolution Bandwidth of 1.5 GHz in 65 nm CMOS
The DOI matches its Crossref record; 15 of the 21 references it cites were found in a registry or an index.
Abstract
This paper presents a power- and area-efficient 24-way time-interleaved successive-approximation-register (SAR) analog-to-digital converter (ADC) that achieves 2.8 GS/s and 8.1 ENOB in 65 nm CMOS. To minimize the power and the area, the capacitors in the capacitive DAC are sized to meet the thermal noise requirements rather than the matching requirements, leading to the LSB capacitance of 50 aF. An on-chip digital background calibration is used to calibrate the capacitor mismatches in individual ADC channels, as well as the inter-channel offset, gain and timing mismatches. Measurement results at the 2.8 GS/s sampling rate show that the ADC chip prototype consumes 44.6 mW of power from a 1.2 V supply while achieving peak SNDR of 50.9 dB and retaining SNDR higher than 48.2 dB across the entire first Nyquist zone with a$1.8{\rm V} _{{\rm pp}\mathchar"702D {\rm diff}}$input signal. The prototype chip occupies an area of 1.03$\,\times\,$1.66${\rm mm}^{2}$, including the pads and the testing circuits. The figure of merit (FoM) of this ADC, calculated with the minimum SNDR in the first Nyquist zone, is 76 fJ/conversion-step.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“previous ADC designs have used a unit capacitor size as small as 50 aF (ref. 56; 340 times smaller than our Csample).”
From A compute-in-memory chip based on resistive random-access memory (2022) · cites this paper as [56]
Citations
Cites
A 1.5-V, 10-bit, 14.3-MS/s CMOS pipeline analog-to-digital converter
Abo, A. M., & Gray, P. R. (1999) · IEEE Journal of Solid-State Circuits · doi:10.1109/4.760369 · Cited by 923 · cited 1×
“The switch is a slightly modified version of the bootstrapped switch proposed in [24].”
BackgroundTime interleaved converter arrays
Black, W. C., & Hodges, D. A. (1980) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.1980.1051512 · Cited by 828 · cited 1×
“However, the energy efficiencies of the ADCs that satisfy these specifications [1], [3] significantly lag behind those that sample in the 100 MHz range [4]–[8].”
BackgroundA 10b 100MS/s 1.13mW SAR ADC with binary-scaled error compensation
Liu, C.-C., Chang, S.-J., Huang, G.-Y., Lin, Y.-Z., Huang, C.-M., Huang, C.-H., Bu, L., & Tsai, C.-C. (2010) · 2010 IEEE International Solid-State Circuits Conference - (ISSCC) · doi:10.1109/isscc.2010.5433970 · Cited by 316
Noise Analysis of Regenerative Comparators for Reconfigurable ADC Architectures
Nuzzo, P., De Bernardinis, F., Terreni, P., & Van der Plas, G. (2008) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2008.917991 · Cited by 305 · cited 1×
“monly used sense-amplifier based latch [23].”
Jamal, S. M., Fu, D., Chang, N. C.-J., Hurst, P. J., & Lewis, S. H. (2002) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2002.804327 · Cited by 292
A 12-GS/s 81-mW 5-bit Time-Interleaved Flash ADC With Background Timing Skew Calibration
El-Chammas, M., & Murmann, B. (2011) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2011.2108125 · Cited by 264 · cited 1×
“Section VIII concludes this paper.”
The Impact of Combined Channel Mismatch Effects in Time-Interleaved ADCs
Vogel, C. (2005) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2004.834046 · Cited by 225
A 1.35 GS/s, 10 b, 175 mW Time-Interleaved AD Converter in 0.13 µm CMOS
Louwsma, S. M., van Tuijl, A. J. M., Vertregt, M., & Nauta, B. (2008) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2008.917427 · Cited by 159
A 1.1V 50mW 2.5GS/s 7b Time-Interleaved C-2C SAR ADC in 45nm LP digital CMOS
Alpman, E., Lakdawala, H., Carley, L. R., & Soumyanath, K. (2009) · Digest of technical papers/Digest of technical papers - IEEE International Solid-State Circuits Conference · doi:10.1109/isscc.2009.4977315 · Cited by 157 · cited 1×
“Section VIII concludes this paper.”
A 480 mW 2.6 GS/s 10b Time-Interleaved ADC With 48.5 dB SNDR up to Nyquist in 65 nm CMOS
Doris, K., Janssen, E., Nani, C., Zanikopoulos, A., & van der Weide, G. (2011) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2011.2164961 · Cited by 157
A 1.7 mW 11b 250 MS/s 2-Times Interleaved Fully Dynamic Pipelined SAR ADC in 40 nm Digital CMOS
Verbruggen, B., Iriguchi, M., & Craninckx, J. (2012) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2012.2217873 · Cited by 111
A 70 dB DR 10 b 0-to-80 MS/s Current-Integrating SAR ADC With Adaptive Dynamic Range
Malki, B., Yamamoto, T., Verbruggen, B., Wambacq, P., & Craninckx, J. (2014) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2014.2309086 · Cited by 62
Crivelli, D. E., Hueda, M. R., Carrer, H. S., Zachan, J., Gutnik, V., del Barco, M., Lopez, R., Hatcher, G., Finochietto, J. M., Yeo, M., et al. (2012) · Digest of technical papers/Digest of technical papers - IEEE International Solid-State Circuits Conference · doi:10.1109/isscc.2012.6177033 · Cited by 37
A 70dB DR 10b 0-to-80MS/s current-integrating SAR ADC with adaptive dynamic range
Malki, B., Yamamoto, T., Verbruggen, B., Wambacq, P., & Craninckx, J. (2012) · Digest of technical papers/Digest of technical papers - IEEE International Solid-State Circuits Conference · doi:10.1109/isscc.2012.6177095 · Cited by 32
A CMOS 5.37-mW 10-Bit 200-MS/s Dual-Path Pipelined ADC
Chai, Y., & Wu, J.-T. (2012) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2012.2217872 · Cited by 15
Research works printed but not linked: 12
- corcoran, 1987, A 1 GHz 6 b ADC system, IEEE ISSCC Dig Tech Papers, 102
- poulton, 2003, A 20-Gsample/s 8 b ADC with 1-MByte memory in 0.18-<formula formulatype="inline"><tex Notation="TeX">$\mu{\rm m}$</tex></formula> CMOS, IEEE ISSCC Dig Tech Papers, 318
- schvan, 2008, A 24 GS/s 6 b ADC in 90 nm CMOS, IEEE ISSCC Dig Tech Papers, 390
- greshishchev, 2010, A 40 GS/s 6 b ADC in 90 nm CMOS, IEEE ISSCC Dig Tech Papers, 390
- 0, 8-Bit 2 2 Gsps ADC with Track/Hold Amplifier and 1 4 Demultiplexed LVDS Outputs
- kuttner, 2002, A 1.2-V 10-b 20-Msample/s nonbinary successive approximation ADC in 0.13-<formula formulatype="inline"><tex Notation="TeX">$\mu{\rm m}$</tex></formula> CMOS, IEEE ISSCC Dig Tech Papers, 176
- 0, ADC10D1000/1500 Low Power 10-bit Dual 1 0/1 5 GSPS or Single 2 0/3 0 GSPS ADC
- liu, 2010, A 10 b 100 MS/s 1.13 mW SAR ADC with binary-scaled error compensation, IEEE ISSCC Dig Tech Papers, 386
- yoshioka, 2010, A 10 b 50 MS/s 820 <formula formulatype="inline"><tex Notation="TeX">$\mu{\rm W}$</tex></formula> SAR ADC with on-chip digital calibration, IEEE ISSCC Dig Tech Papers, 384
- 2010, PHY/MAC draft standard
- liu, 2009, A 600 MS/s 30 mW 0.13 <formula formulatype="inline"><tex Notation="TeX">$\mu{\rm m}$</tex></formula> CMOS ADC array achieving over 60 dB SFDR with adaptive digital equalization, IEEE ISSCC Dig Tech Papers, 82
- murmann, 0, ADC Performance Survey 1997?2012
Cited by
A compute-in-memory chip based on resistive random-access memory
Wan, W., Kubendran, R., Schaefer, C., Eryilmaz, S. B., Zhang, W., Wu, D., Deiss, S., Raina, P., Qian, H., Gao, B., et al. (2022) · Nature · doi:10.1038/s41586-022-04992-8 · Cited by 943
Kull, L., Toifl, T., Schmatz, M., Francese, P. A., Menolfi, C., Brandli, M., Kossel, M., Morf, T., Andersen, T. M., & Leblebici, Y. (2013) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2013.2279571 · Cited by 347
“In addition, multi-bit/cycle reduces the advantages of redundancy and asynchronous timing.”
BackgroundDesign Considerations for Interleaved ADCs
Razavi, B. (2013) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2013.2258814 · Cited by 342
A 12-b 10-GS/s Interleaved Pipeline ADC in 28-nm CMOS Technology
Devarajan, S., Singer, L. A., Kelly, D. F., Pan, T., Silva, J. F., Brunsilius, J., Rey-Losada, D., Murden, F., Speir, C., Bray, J., et al. (2017) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2017.2747758 · Cited by 216
“However, for timing mismatches the estimation is done digitally but the correction is done in the analog domain [16], [24], [12].”
A 1 GS/s 10b 18.9 mW Time-Interleaved SAR ADC With Background Timing Skew Calibration
Lee, S., Chandrakasan, A. P., & Lee, H.-S. (2014) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2014.2362851 · Cited by 186
“Reference [9] uses two additional ADC channels for a direct measurement of the timing skew error.”
BackgroundMethod
Metadata
- Authors
- Stepanovic, D., & Nikolic, B.
- Affiliations
- Agilent Technologies (United States) (US)
- Venue
- IEEE Journal of Solid-State Circuits
- Published
- 2013-04
- Volume
- 48
- Issue
- 4
- Pages
- 971-982
- ISSN
- 0018-9200 (ISSN-L)
- 1558-173X
- OpenAlex
- W2113142084
- Semantic Scholar
- fc0c11f72145fe3c0a3f33d52f4c099ed5704d30
- Cited by
- 192
- References
- 21
- Citations by year
- 2026: 3 · 2025: 6 · 2024: 14 · 2023: 8 · 2022: 17 · 2021: 15 · 2020: 14 · 2019: 16 · 2018: 21 · 2017: 17 · 2016: 18 · 2015: 21 · 2014: 14 · 2013: 8
- FWCI
- 11.22
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Journal of Solid-State Circuits (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Analog and Mixed-Signal Circuit Design
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Radio Frequency Integrated Circuit Design
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in PLL and VCO Technologies
- Keywords
- time-interleaved ADC, successive approximation register ADC, capacitive DAC, thermal noise, capacitor mismatch calibration, digital background calibration, low-power analog-to-digital converter, 65 nm CMOS
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.