A 2.8 GS/s 44.6 mW Time-Interleaved ADC Achieving 50.9 dB SNDR and 3 dB Effective Resolution Bandwidth of 1.5 GHz in 65 nm CMOS
The DOI matches its Crossref record; 15 of the 21 references it cites were found in a registry or an index.
Abstract
This paper presents a power- and area-efficient 24-way time-interleaved successive-approximation-register (SAR) analog-to-digital converter (ADC) that achieves 2.8 GS/s and 8.1 ENOB in 65 nm CMOS. To minimize the power and the area, the capacitors in the capacitive DAC are sized to meet the thermal noise requirements rather than the matching requirements, leading to the LSB capacitance of 50 aF. An on-chip digital background calibration is used to calibrate the capacitor mismatches in individual ADC channels, as well as the inter-channel offset, gain and timing mismatches. Measurement results at the 2.8 GS/s sampling rate show that the ADC chip prototype consumes 44.6 mW of power from a 1.2 V supply while achieving peak SNDR of 50.9 dB and retaining SNDR higher than 48.2 dB across the entire first Nyquist zone with a$1.8{\rm V} _{{\rm pp}\mathchar"702D {\rm diff}}$input signal. The prototype chip occupies an area of 1.03$\,\times\,$1.66${\rm mm}^{2}$, including the pads and the testing circuits. The figure of merit (FoM) of this ADC, calculated with the minimum SNDR in the first Nyquist zone, is 76 fJ/conversion-step.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“previous ADC designs have used a unit capacitor size as small as 50 aF (ref. 56; 340 times smaller than our Csample).”
From A compute-in-memory chip based on resistive random-access memory (2022) · cites this paper as [56]
Citations
Cites
A 1.5-V, 10-bit, 14.3-MS/s CMOS pipeline analog-to-digital converter
Abo, A. M., & Gray, P. R. (1999) · IEEE Journal of Solid-State Circuits · doi:10.1109/4.760369 · Cited by 923 · cited 1×
“The switch is a slightly modified version of the bootstrapped switch proposed in [24].”
BackgroundTime interleaved converter arrays
Black, W. C., & Hodges, D. A. (1980) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.1980.1051512 · Cited by 828 · cited 1×
“However, the energy efficiencies of the ADCs that satisfy these specifications [1], [3] significantly lag behind those that sample in the 100 MHz range [4]–[8].”
BackgroundA 10b 100MS/s 1.13mW SAR ADC with binary-scaled error compensation
Liu, C.-C., Chang, S.-J., Huang, G.-Y., Lin, Y.-Z., Huang, C.-M., Huang, C.-H., Bu, L., & Tsai, C.-C. (2010) · 2010 IEEE International Solid-State Circuits Conference - (ISSCC) · doi:10.1109/isscc.2010.5433970 · Cited by 316
Noise Analysis of Regenerative Comparators for Reconfigurable ADC Architectures
Nuzzo, P., De Bernardinis, F., Terreni, P., & Van der Plas, G. (2008) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2008.917991 · Cited by 305 · cited 1×
“monly used sense-amplifier based latch [23].”
Jamal, S. M., Fu, D., Chang, N. C.-J., Hurst, P. J., & Lewis, S. H. (2002) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2002.804327 · Cited by 292
A 12-GS/s 81-mW 5-bit Time-Interleaved Flash ADC With Background Timing Skew Calibration
El-Chammas, M., & Murmann, B. (2011) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2011.2108125 · Cited by 264 · cited 1×
“Section VIII concludes this paper.”
The Impact of Combined Channel Mismatch Effects in Time-Interleaved ADCs
Vogel, C. (2005) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2004.834046 · Cited by 225
A 1.35 GS/s, 10 b, 175 mW Time-Interleaved AD Converter in 0.13 µm CMOS
Louwsma, S. M., van Tuijl, A. J. M., Vertregt, M., & Nauta, B. (2008) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2008.917427 · Cited by 159
A 1.1V 50mW 2.5GS/s 7b Time-Interleaved C-2C SAR ADC in 45nm LP digital CMOS
Alpman, E., Lakdawala, H., Carley, L. R., & Soumyanath, K. (2009) · Digest of technical papers/Digest of technical papers - IEEE International Solid-State Circuits Conference · doi:10.1109/isscc.2009.4977315 · Cited by 157 · cited 1×
“Section VIII concludes this paper.”
A 480 mW 2.6 GS/s 10b Time-Interleaved ADC With 48.5 dB SNDR up to Nyquist in 65 nm CMOS
Doris, K., Janssen, E., Nani, C., Zanikopoulos, A., & van der Weide, G. (2011) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2011.2164961 · Cited by 157
Research works printed but not linked: 12
- corcoran, 1987, A 1 GHz 6 b ADC system, IEEE ISSCC Dig Tech Papers, 102
- poulton, 2003, A 20-Gsample/s 8 b ADC with 1-MByte memory in 0.18-<formula formulatype="inline"><tex Notation="TeX">$\mu{\rm m}$</tex></formula> CMOS, IEEE ISSCC Dig Tech Papers, 318
- schvan, 2008, A 24 GS/s 6 b ADC in 90 nm CMOS, IEEE ISSCC Dig Tech Papers, 390
- greshishchev, 2010, A 40 GS/s 6 b ADC in 90 nm CMOS, IEEE ISSCC Dig Tech Papers, 390
- 0, 8-Bit 2 2 Gsps ADC with Track/Hold Amplifier and 1 4 Demultiplexed LVDS Outputs
- kuttner, 2002, A 1.2-V 10-b 20-Msample/s nonbinary successive approximation ADC in 0.13-<formula formulatype="inline"><tex Notation="TeX">$\mu{\rm m}$</tex></formula> CMOS, IEEE ISSCC Dig Tech Papers, 176
- 0, ADC10D1000/1500 Low Power 10-bit Dual 1 0/1 5 GSPS or Single 2 0/3 0 GSPS ADC
- liu, 2010, A 10 b 100 MS/s 1.13 mW SAR ADC with binary-scaled error compensation, IEEE ISSCC Dig Tech Papers, 386
- yoshioka, 2010, A 10 b 50 MS/s 820 <formula formulatype="inline"><tex Notation="TeX">$\mu{\rm W}$</tex></formula> SAR ADC with on-chip digital calibration, IEEE ISSCC Dig Tech Papers, 384
- 2010, PHY/MAC draft standard
- liu, 2009, A 600 MS/s 30 mW 0.13 <formula formulatype="inline"><tex Notation="TeX">$\mu{\rm m}$</tex></formula> CMOS ADC array achieving over 60 dB SFDR with adaptive digital equalization, IEEE ISSCC Dig Tech Papers, 82
- murmann, 0, ADC Performance Survey 1997?2012
Cited by
A compute-in-memory chip based on resistive random-access memory
Wan, W., Kubendran, R., Schaefer, C., Eryilmaz, S. B., Zhang, W., Wu, D., Deiss, S., Raina, P., Qian, H., Gao, B., et al. (2022) · Nature · doi:10.1038/s41586-022-04992-8 · Cited by 943
Kull, L., Toifl, T., Schmatz, M., Francese, P. A., Menolfi, C., Brandli, M., Kossel, M., Morf, T., Andersen, T. M., & Leblebici, Y. (2013) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2013.2279571 · Cited by 347
“In addition, multi-bit/cycle reduces the advantages of redundancy and asynchronous timing.”
BackgroundDesign Considerations for Interleaved ADCs
Razavi, B. (2013) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2013.2258814 · Cited by 342
A 12-b 10-GS/s Interleaved Pipeline ADC in 28-nm CMOS Technology
Devarajan, S., Singer, L. A., Kelly, D. F., Pan, T., Silva, J. F., Brunsilius, J., Rey-Losada, D., Murden, F., Speir, C., Bray, J., et al. (2017) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2017.2747758 · Cited by 216
“However, for timing mismatches the estimation is done digitally but the correction is done in the analog domain [16], [24], [12].”
A 1 GS/s 10b 18.9 mW Time-Interleaved SAR ADC With Background Timing Skew Calibration
Lee, S., Chandrakasan, A. P., & Lee, H.-S. (2014) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2014.2362851 · Cited by 186
“Reference [9] uses two additional ADC channels for a direct measurement of the timing skew error.”
BackgroundMethodDortz, N. L., Blanc, J.-P., Simon, T., Verhaeren, S., Rouat, E., Urard, P., Tual, S. L., Goguet, D., Lelandais-Perrault, C., & Bénabès, P. (2014) · Digest of technical papers/Digest of technical papers - IEEE International Solid-State Circuits Conference · doi:10.1109/isscc.2014.6757481 · Cited by 160
“This is as good as previously published designs [1-3] that use additional linearity calibration circuitry.”
BackgroundMethodA 14b 80 MS/s SAR ADC With 73.6 dB SNDR in 65 nm CMOS
Kapusta, R., Shen, J., Decker, S., Li, H., Ibaragi, E., & Zhu, H. (2013) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2013.2274113 · Cited by 153
“ADCs [7]–[10], multiple single-ADC channels are time-inter-”
BackgroundZhou, Y., Xu, B., & Chiu, Y. (2015) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2014.2384025 · Cited by 139
“[7]–[9], subranging [4], [10], multi-bit/cycle [11], [12], and”
An 8 Bit 4 GS/s 120 mW CMOS ADC
Wei, H.-G., Zhang, P., Sahoo, B. D., & Razavi, B. (2014) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2014.2313571 · Cited by 151
Ramkaj, A. T., Strackx, M., Steyaert, M. S. J., & Tavernier, F. (2018) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2018.2822823 · Cited by 130
“Typically, such GHz-range ADCs are built by interleaving in the time domain several slices that operate in their optimum point in terms of power versus sampling rate [2], [3].”
BackgroundA 4.2 mW 50 MS/s 13 bit CMOS SAR ADC With SNR and SFDR Enhancement Techniques
Miki, T., Morie, T., Matsukawa, K., Bando, Y., Okumoto, T., Obata, K., Sakiyama, S., & Dosho, S. (2015) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2015.2417803 · Cited by 99
A 10-bit 2.6-GS/s Time-Interleaved SAR ADC With a Digital-Mixing Timing-Skew Calibration Technique
Lin, C., Wei, Y.-H., & Lee, T. (2018) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2018.2793535 · Cited by 91
“However, most of the timing-skew estimation methods [5], [6] only determine the relative timing skew rather than the absolute value because they just need a rough estimation or the polarity of the specific timing skew for analog skew calibration.”
BackgroundMethodRamkaj, A. T., Ramos, J. C. P., Pelgrom, M. J. M., Steyaert, M. S. J., Verhelst, M., & Tavernier, F. (2020) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2019.2960476 · Cited by 95
All-Digital Blind Background Calibration Technique for Any Channel Time-Interleaved ADC
Qiu, Y., Liu, Y., Zhou, J., Zhang, G., Chen, D., & Du, N. (2018) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2018.2794529 · Cited by 86
“These application systems have an increasing need for high speed analog-to- -digital conversion at reasonable power consumption without performance degradation, which brings a lot of difficulties to analog circuit designers [2]–[4].”
BackgroundPCNNA: A Photonic Convolutional Neural Network Accelerator
Mehrabian, A., Al-Kabani, Y., Sorger, V. J., & El-Ghazawi, T. (2018) · IEEE International System-on-Chip Conference (SOCC) · doi:10.1109/socc.2018.8618542 · Cited by 94
“8 GSa/s Analog-to-Digital Converter (ADC) [17] and stored into the off-chip DRAM through the output buffer.”
MethodGuo, M., Mao, J., Sin, S., Wei, H.-G., & Martins, R. P. (2019) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2019.2945298 · Cited by 87
“The LMS search block updates the coefficient of mismatch factors effectively minimizing the difference e [8], [13]–[16].”
BackgroundMethodInfluentialZhou, Y., Xu, B., & Chiu, Y. (2019) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2019.2915583 · Cited by 79
“In [2], the input derivative information is extracted by two slow-but-accurate ref.”
MethodNam, J.-W., Hassanpourghadi, M., Zhang, A., & Chen, M. S. (2018) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2018.2808244 · Cited by 80
A 5 GS/s 150 mW 10 b SHA-Less Pipelined/SAR Hybrid ADC for Direct-Sampling Systems in 28 nm CMOS
Brandolini, M., Shin, Y. J., Raviprakash, K., Wang, T., Wu, R., Geddada, H. M., Ko, Y.-J., Ding, Y., Huang, C., Shih, W.-T., et al. (2015) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2015.2464684 · Cited by 77
A 23-mW 24-GS/s 6-bit Voltage-Time Hybrid Time-Interleaved ADC in 28-nm CMOS
Xu, B., Zhou, Y., & Chiu, Y. (2017) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2016.2642204 · Cited by 78
“Using a reference ADC in a TI-ADC array as static and/or timing references has been discussed in [13]–[16].”
BackgroundMethodA 2-GS/s 8-bit Time-Interleaved SAR ADC for Millimeter-Wave Pulsed Radar Baseband SoC
Miki, T., Ozeki, T., & Naka, J.-I. (2017) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2017.2732732 · Cited by 72
“In [5], two extra redundant sub-ADCs are employed to estimate the timing skews and align the sampling edges, however, additional sub-ADCs cause an area overhead.”
BackgroundA 6-b 4.1-GS/s Flash ADC With Time-Domain Latch Interpolation in 90-nm CMOS
Kim, J., Sung, B., Kim, W., & Ryu, S. (2013) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2013.2252516 · Cited by 74
“One of the recent trends for such high-speed ADC design is interleaving low-power SAR ADCs [3]–[5].”
BackgroundDuc, H. L., Nguyen, D. M., Jabbour, C., Desgreys, P., Jamin, O., & Nguyen, V. T. (2017) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2016.2645978 · Cited by 68
“The timing mismatches in TIADCs can be effectively corrected by using analog and/or mixed signal calibration techniques [1], [4]–[9].”
MethodWu, T.-F., Ho, C., & Chen, M. S. (2017) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2017.2718671 · Cited by 72
“There are existing works that show learning the signal slope is feasible [13], [36], [37].”
BackgroundSingh, S., Anttila, L., Epp, M., Schlecker, W., & Valkama, M. (2015) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2015.2459554 · Cited by 64
“, multiphase clock generation, and more complex input signal and ADC clock distribution network [3], [5], [8].”
BackgroundInfluentialA 10-b 800-MS/s Time-Interleaved SAR ADC With Fast Variance-Based Timing-Skew Calibration
Song, J., Ragab, K., Tang, X., & Sun, N. (2017) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2017.2713523 · Cited by 66
“In [8], two reference ADCs are utilized.”
BackgroundAn Energy-Efficient Low Frequency-Dependence Switching Technique for SAR ADCs
Sanyal, A., & Sun, N. (2014) · IEEE Transactions on Circuits & Systems II Express Briefs · doi:10.1109/tcsii.2014.2304890 · Cited by 66
“implementation is not a major problem as has been shown in [17], which uses a Cu as small as 50 aF.”
BackgroundA 65 nm CMOS 7b 2 GS/s 20.7 mW Flash ADC With Cascaded Latch Interpolation
Kim, J., Oh, D., Jo, D., Sung, B., & Ryu, S. (2015) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2015.2460371 · Cited by 55
“entered the mainstream of high-speed ADCs [1]–[3].”
27.7 A 10b 2.6GS/s time-interleaved SAR ADC with background timing-skew calibration
Lin, C., Wei, Y.-H., & Lee, T. (2016) · Digest of technical papers/Digest of technical papers - IEEE International Solid-State Circuits Conference · doi:10.1109/isscc.2016.7418110 · Cited by 50
Tavares, Y. A., & Lee, M. (2021) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2021.3051612 · Cited by 50
“Time-interleaved ADCs (TI-ADCs) have been known for achieving extremely high sampling rates, which otherwise could not be achieved by any other ADC architecture [4].”
BackgroundMethodNi, M., Wang, X., Li, F., Rhee, W., & Wang, Z. (2021) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2021.3122984 · Cited by 47
A 6 b 5 GS/s 4 Interleaved 3 b/Cycle SAR ADC
Chan, C., Zhu, Y., Sin, S., Seng‐Pan, U., & Martins, R. P. (2015) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2015.2493167 · Cited by 46
22.4 A 1GS/s 10b 18.9mW time-interleaved SAR ADC with background timing-skew calibration
Lee, S., Chandrakasan, A. P., & Lee, H.-S. (2014) · Digest of technical papers/Digest of technical papers - IEEE International Solid-State Circuits Conference · doi:10.1109/isscc.2014.6757480 · Cited by 44
Kang, H.-W., Hong, H.-K., Kim, W., & Ryu, S. (2018) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2018.2843360 · Cited by 43
“By employing a spare ADC to sample the input with a designed short time lag, the calibration scheme in [9] was able to find the instantaneous slope of the input, and thus the direction of skews, at any given calibration point.”
BackgroundMethodInfluential5-bit 5-GS/s Noninterleaved Time-Based ADC in 65-nm CMOS for Radio-Astronomy Applications
Xu, Y., Wu, G., Belostotski, L., & Haslett, J. W. (2016) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2016.2558105 · Cited by 41
“FOR radio telescopes, 4- or 5-bit analog-to-digital converters (ADCs) are often sufficient [1], but time interleaving, used in other systems [2]–[9], is not acceptable [10] as it creates timing spurs, which appear just like astronomical signals that cannot be completely calibrated out and that reappear from the noise…”
BackgroundZahrai, S. A., & Onabajo, M. (2018) · Journal of Low Power Electronics and Applications · doi:10.3390/jlpea8020012 · Cited by 47
“The energy per conversion step of a TI-ADC is ideally equal to the one for the sub-ADC in each channel, but in practice, there is a power overhead caused by multi-channel clock generation and the calibration of channel mismatches [4,18,19].”
BackgroundMethodInfluentialSwindlehurst, E., Jensen, H., Petrie, A., Song, Y., Kuan, Y., Qu, Y. Y., Chang, M.-C. F., Wu, J.-T., & Chiang, S.-H. W. (2021) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2021.3057372 · Cited by 41
Chang, D.-J., Choi, M. J., & Ryu, S. (2021) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2021.3073976 · Cited by 41
Rabuske, T. G., & Fernandes, J. R. (2016) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2016.2548486 · Cited by 40
“Similarly, SAR ADCs have been used as building blocks of time-interleaved architectures [5], [6] and pipeline converters [7].”
MethodA Sign-Equality-Based Background Timing-Mismatch Calibration Algorithm for Time-Interleaved ADCs
Kang, H.-W., Hong, H.-K., Park, S., Kim, K., Ahn, K., & Ryu, S. (2016) · IEEE Transactions on Circuits & Systems II Express Briefs · doi:10.1109/tcsii.2016.2530819 · Cited by 39
“The resolution of the reference ADC was chosen to be 5 b to show that the complexity and overhead from using a reference ADC are negligible compared to other conventional designs using a reference ADC [8] for which the resolution in the channels and reference ADC are the same.”
BackgroundMethodInfluentialSingh, S., Anttila, L., Epp, M., Schlecker, W., & Valkama, M. (2015) · IEEE Transactions on Microwave Theory and Techniques · doi:10.1109/tmtt.2015.2409852 · Cited by 38
“This work was supported in part by the Academy of Finland under the Digitally-Enhanced RF for Cognitive Radio Devices Project 251138, and in part by the Linz Center of Mechatronics (LCM) under the Austrian COMET-K2 program.”
MethodReyes, B. T., Sanchez, R. M., Pola, A. L., & Hueda, M. R. (2016) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2016.2636209 · Cited by 36
“Some of these techniques do the operations directly between the parallel ADC outputs [4], [5], [7] or use an extra ADC channel as a reference [6], [8], [13].”
BackgroundMethodReference Receiver Enhanced Digital Linearization of Wideband Direct-Conversion Receivers
Marttila, J., Allén, M., Kosunen, M., Stadius, K., Ryynänen, J., & Valkama, M. (2017) · IEEE Transactions on Microwave Theory and Techniques · doi:10.1109/tmtt.2016.2638840 · Cited by 36
“This would allow decreased power consumption because of the turned-off ref-RX analog components, such as amplifiers and ADCs as well as the digital parameter learning algorithms.”
BackgroundInfluentialLAYGO: A Template-and-Grid-Based Layout Generation Engine for Advanced CMOS Technologies
Han, J., Bae, W., Chang, E. Y., Wang, Z., Nikolić, B., & Alon, E. (2021) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2020.3046524 · Cited by 36
“Thereafter, the TI-SAR ADC macro is combined with generated clocking circuits (whose structure is illustrated in [26]), biasing circuits and custom components provided by foundry companies for ESD protections and PAD connections to produce the final layout.”
MethodCao, Y., Zhang, M., Zhu, Y., Martins, R. P., & Chan, C. (2024) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2024.3482567 · Cited by 32
“Aside from these works, the calibrations utilizing the sign-equality-based approaches [2], [3], [11], or derivative-based methods [12], [13], [14], [15], fail under specific conditions, such as a dc input and a certain input frequency or BW. Nonetheless, the aforementioned constraints on the input…”
Guo, M., Mao, J., Sin, S., Wei, H.-G., & Martins, R. P. (2020) · IEEE Access · doi:10.1109/access.2020.3012699 · Cited by 32
Hardware implementation of all digital calibration for undersampling TIADCs
Duc, H. L., Nguyen, D. M., Jabbour, C., Graba, T., Desgreys, P., Jamin, O., & Nguyen, V. T. (2015) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas.2015.7169113 · Cited by 29
“The channel mismatches in TI-ADCs can be effectively handled by analog and/or mixed signal calibration techniques [2]–[4].”
BackgroundGu, M., Tao, Y., He, X., Zhong, Y., Jie, L., & Sun, N. (2024) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2024.3421363 · Cited by 29
“The first category of calibration techniques extracts timing-skew errors by using an additional reference channel that aligns with each channel periodically [1], [2], [3], [4], [5], [6], [7], [8].”
Zahrai, S. A., Zlochisti, M., Dortz, N. L., & Onabajo, M. (2017) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2017.2739108 · Cited by 31
“and channel mismatch calibration [8], [10], [11].”
BackgroundMethodInfluentialZhong, J., Zhu, Y., Sin, S., Seng‐Pan, U., & Martins, R. P. (2015) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2015.2452331 · Cited by 28
“If is constrained by the achievable minimum unit capacitance [10] in the DAC, the power drawn from the opamp will rise linearly with the stage gain [3].”
BackgroundKundu, S., Alpman, E., Lu, J. H.-L., Lakdawala, H., Paramesh, J., Jung, B., Zur, S., & Gordon, E. (2015) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2015.2452372 · Cited by 28
“However, time-interleaving causes performance impairments in TI-SAR ADCs; their mitigation necessitates long and elaborate digitally-assisted calibration schemes [3], [5].”
BackgroundComprehensive Background Calibration of Time-Interleaved Analog-to-Digital Converters
Xu, B., & Chiu, Y. (2015) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2015.2403035 · Cited by 27
“However, in the most general sense, dynamic mismatch calibration is always necessary [8]–[13].”
BackgroundMethodInfluentialA 6 bit 2 GS/s flash-assisted time-interleaved (FATI) SAR ADC with background offset calibration
Sung, B., Lee, C., Kim, W., Kim, J., Hong, H.-K., Oh, G.-G., Lee, C.-H., Choi, M. J., Park, G.-H., & Ryu, S. (2013) · IEEE Asian Solid-State Circuits Conference (A-SSCC) · doi:10.1109/asscc.2013.6691037 · Cited by 30
“For low-power consumption and fine offset calibration, a charge-pump-based offset tracking method was used.”
MethodA 14-Bit 500-MS/s Time-Interleaved ADC With Autocorrelation-Based Time Skew Calibration
Wang, X., Li, F., Jia, W., & Wang, Z. (2018) · IEEE Transactions on Circuits & Systems II Express Briefs · doi:10.1109/tcsii.2018.2849691 · Cited by 26
“In [3], two extra channels are introduced.”
Song, J., Ragab, K., Tang, X., & Sun, N. (2019) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2019.2907581 · Cited by 26
“state-of-the-art background timing-skew calibration techniques are reported to effectively reduce timing skews [1]–[14].”
BackgroundMethodWang, G., Sun, K., Zhang, Q., Elahmadi, S., & Gui, P. (2019) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2019.2912887 · Cited by 27
“A unit capacitor as small as 50 aF was reported in [14], as the capacitive DAC was sized to meet the thermal noise requirements, rather than the matching requirements.”
BackgroundA Fast Convergence Second-Order Compensation for Timing Skew in Time-Interleaved ADCs
Li, D., Zhao, L., Wang, L., Shen, Y., & Zhu, Z. (2022) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2022.3189641 · Cited by 24
“with variance [6], auto-correlation [4], or slope detection [8], [14].”
BackgroundA 2.7 mW/Channel 48–1000 MHz Direct Sampling Full-Band Cable Receiver
Wu, J., Cusmai, G., Chou, A. W.-T., Wang, T., Shen, B., Periasamy, V., Hsieh, M.-H., Chen, C.-Y., He, L., Tan, L. K., et al. (2016) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2015.2511164 · Cited by 24
A Time-Interleaved SAR ADC With Signal-Independent Background Timing Calibration
Su, C. K., Hurst, P. J., & Lewis, S. H. (2021) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2021.3114708 · Cited by 23
An Introduction to High Sample Rate Nyquist Analog-to-Digital Converters
Manganaro, G. (2022) · IEEE Open Journal of the Solid-State Circuits Society · doi:10.1109/ojsscs.2022.3212028 · Cited by 23
“Another interesting example is described in [77], using two reference ADCs.”
BackgroundBè, G., Parisi, A., Bertulessi, L., Ricci, L., Scaletti, L., Mercandelli, M., Lacaita, A. L., Levantino, S., Samori, C., & Bonfanti, A. G. (2022) · IEEE Transactions on Circuits & Systems II Express Briefs · doi:10.1109/tcsii.2022.3182217 · Cited by 24
“Mixed-signal calibrations based on tuning the sampling clock edges by programmable delay lines are, instead, the design choice for integrated implementations [1], [14]–[17] due to their efficiency and compactness.”
BackgroundThakkar, C., Narevsky, N., Hull, C., & Alon, E. (2014) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2014.2360917 · Cited by 22
A 16-mW 1-GS/s With 49.6-dB SNDR TI-SAR ADC for Software-Defined Radio in 65-nm CMOS
Qiu, L., Tang, K., Zheng, Y., Siek, L., Zhu, Y., & Seng‐Pan, U. (2017) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2017.2771811 · Cited by 21
“To achieve higher sampling rate with SAR architecture, timeinterleaved (TI) SAR ADCs were presented [5], [9]–[11], [22]–[24].”
BackgroundMethodDyer, K. C., Keane, J. P., & Lewis, S. H. (2018) · IEEE Solid-State Circuits Magazine · doi:10.1109/mssc.2018.2844609 · Cited by 21
“Figure 6 shows a block diagram of an architecture that overcomes the sensitivity to aliasing and reduces the sensitivity to the statistics of the input signal [13].”
BackgroundA Background Correlation-Based Timing Skew Estimation Method for Time-Interleaved ADCs
Li, X., Wu, J., & Vogel, C. (2021) · IEEE Access · doi:10.1109/access.2021.3067355 · Cited by 21
“To cope with the shortcoming of the foreground estimation techniques, the timing skew mismatches estimation meth-ods for operating in the background, i.e., without interrupting the normal conversion, have been reported [13]–[36].”
MethodKundu, S., Lu, J. H., Alpman, E., Lakdawala, H., Paramesh, J., Jung, B., Zur, S., & Gordon, E. (2014) · Custom Integrated Circuits Conference · doi:10.1109/cicc.2014.6945992 · Cited by 21
SAR-Assisted Energy-Efficient Hybrid ADCs
Lozada, K. E., Chang, D.-J., Oh, D., Seo, M.-J., & Ryu, S. (2024) · IEEE Open Journal of the Solid-State Circuits Society · doi:10.1109/ojsscs.2024.3472000 · Cited by 20
“This has led to the development of various skew calibration techniques [32], [34], [35], [48], [49], [50].”
BackgroundMethodA 400-MS/s 10-b 2-b/Step SAR ADC With 52-dB SNDR and 5.61-mW Power Dissipation in 65-nm CMOS
Liu, Q., Shu, W., & Chang, J. S. (2017) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2017.2747132 · Cited by 20
All-Digital Bandwidth Mismatch Calibration of TI-ADCs Based on Optimally Induced Minimization
Tavares, Y. A., Lee, K., & Lee, M. (2020) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2020.2974549 · Cited by 18
“Time-interleaved ADCs (TI-ADCs) have been known for achieving extremely high sampling rates, which otherwise could not be achieved by any other ADC architecture [3].”
BackgroundSeong, K., Jung, D.-K., Yoon, D.-H., Han, J., Kim, J. E., Kim, T. T.-H., Lee, W., & Baek, K. (2020) · Sensors · doi:10.3390/s20082430 · Cited by 18
“Meanwhile, t e derivative-b sed timing-skew calibration scheme was proposed in [21,26].”
MethodSong, J., & Sun, N. (2018) · Custom Integrated Circuits Conference · doi:10.1109/cicc.2018.8357058 · Cited by 18
“[1] presents timing-skew calibration technique with fast convergence speed.”
An 8-Gs/s 12-Bit TIADC System With Real-Time Broadband Mismatch Error Correction
Zhao, L., Jiang, Z., Dong, R., Cao, Z., Gao, X., Cheng, B., Hu, J., Liu, S., & An, Q. (2018) · IEEE Transactions on Nuclear Science · doi:10.1109/tns.2018.2878875 · Cited by 18
A 0.19 mm2 10 b 2.3 GS/s 12-Way Time-Interleaved Pipelined-SAR ADC in 65-nm CMOS
Zhu, Y., Chan, C., Zheng, Z., Li, C., Zhong, J., & Martins, R. P. (2018) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2018.2859027 · Cited by 18
“The master-slave (MS) [11] avoiding time calibration and buffers exhibits excellent power efficiency for an 11-bit level, which achieves comparable SNDR with those of the time-calibrated TI-SAR ADCs [1], [2] at near a 500 MHz input bandwidth.”
BackgroundMethodInfluentialA comparative research of innovative comparators
Song, B., & Zhao, Y. (2022) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2221/1/012021 · Cited by 17
“The first stage is designed to provide a high gain and a certain bias voltage for the following stages [9].”
BackgroundAn 11b 900 MS/s time-interleaved sub-ranging pipelined-SAR ADC
Zhu, Y., Chan, C., Seng‐Pan, U., & Martins, R. P. (2014) · European Solid-State Circuits Conference (ESSCIRC) · doi:10.1109/esscirc.2014.6942059 · Cited by 17
“The highly Time-Interleaved(TI) SAR ADC with timing-calibration obtains the best power efficiency for the GHz speed goal [3], which removes the power and accuracy trade-off in the clock generator.”
BackgroundHan, H. G., Yu, B. G., & Kim, T. W. (2017) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2017.2679068 · Cited by 17
“To overcome the speed limitation of the sampler for high-speed sampling, the operating speed of the sampler is reduced using multiple interleaving paths [22], [23].”
MethodAccuracy-Enhanced Variance-Based Time-Skew Calibration Using SAR as Window Detector
Liu, J., Chan, C., Sin, S., Seng‐Pan, U., & Martins, R. P. (2018) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2018.2874772 · Cited by 17
“Applications, such as optical communications, direct sampling receivers, and digital equalized datalinks [1]–[3], require high-speed moderate-to-high resolution analog-to-digital converters (ADCs).”
BackgroundMethodWang, A., Bae, W., Han, J., Bailey, S., Öçal, O., Rigge, P., Wang, Z., Ramchandran, K., Alon, E., & Nikolić, B. (2019) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2019.2913099 · Cited by 15
“12(a), are corrected digitally by re-weighing the output bits [23].”
BackgroundGuo, M., Sin, S., Qi, L., Xu, D., Wang, G., & Martins, R. P. (2022) · IEEE Transactions on Circuits & Systems II Express Briefs · doi:10.1109/tcsii.2022.3160736 · Cited by 15
“1 exhibits the signal bandwidth (fin,hf) and SNDR of the wide-band GHz (fin,hf > 0.5GHz) ADCs published in ISSCC and VLSI from 1997-2021 [4], it also highlights that the TI topology is the only one that well balances accuracy and speed.”
BackgroundInfluentialA 2.6 GS/s 8-Bit Time-Interleaved SAR ADC in 55 nm CMOS Technology
Wang, D., Zhu, X., Guo, X., Luan, J., Zhou, L., Wu, D., Liu, H., Wu, J., & Liu, X. (2019) · Electronics · doi:10.3390/electronics8030305 · Cited by 15
“The multi-phase clock pulse signals CK ch,1 – CK ch,8 are generated from CK master using the cascaded D flip-flop (DFF) chain [8 – 10] and combinational logic circuits using synchronous frequency division, as shown in Figure 2a. ch,1 ch,8 master The DFF is constructed using two latches [11], as…”
MethodGuo, M., Mao, J., Sin, S., Wei, H.-G., & Martins, R. P. (2019) · Custom Integrated Circuits Conference · doi:10.1109/cicc.2019.8780222 · Cited by 15
“Therefore, a fast mismatch convergence can be achieved without the use of an extra reference converter [1][4] or a comparator [2][3].”
BackgroundWadatsumi, T., Miki, T., & Nagata, M. (2021) · Japanese Journal of Applied Physics · doi:10.35848/1347-4065/abde26 · Cited by 14
Digital foreground calibration of capacitor mismatch for SAR ADCs
Yeo, I., Kim, B., Chu, M., & Lee, B. (2014) · Electronics Letters · doi:10.1049/el.2014.1868 · Cited by 14
Digital Compensation of Timing Skew Mismatches in Time-Interleaved ADCs by Source Separation
Mafi, H., Hamida, N. B., Aouini, S., & Savaria, Y. (2024) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2024.3376008 · Cited by 13
“Mixed-signal approaches utilize a combination of additional SADC(s) and additional analog circuits for the estimation part [17], [18], [19], [20].”
MethodKundu, S., Gupta, S., Allstot, D. J., & Paramesh, J. (2016) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2016.2603442 · Cited by 13
El-Wafai, N. A., Farrag, A. M. I., Abdelbasit, H. M., Hegazy, M. I., Al‐Goul, S. T., Ashkan, M. F., Al-Quwaie, D. A. H., Alqahtani, F. S., Amin, S. A., Ismail, M. N., et al. (2023) · Processes · doi:10.3390/pr11082350 · Cited by 13
A novel autocorrelation-based timing mismatch C alibration strategy in Time-Interleaved ADCs
Wang, X., Li, F., & Wang, Z. (2016) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas.2016.7527540 · Cited by 12
“case in point is [6], who uses two reference channels to obtain derivative of the input signal.”
BackgroundSolis, F., Reyes, B. T., Morero, D. A., & Hueda, M. R. (2022) · IEEE Access · doi:10.1109/access.2022.3208092 · Cited by 12
“222 • Group 3 (G3): Techniques based on a reference chan- 223 nel [24], [25], [26], [27], [28], [29], [30].”
Guo, M., Qi, L., Zhao, W., Xiao, G., Martins, R. P., & Sin, S. (2023) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2023.3303043 · Cited by 12
“in the time-interleaved (TI) SAR [5], [6], [7], [8], [9], [10],”
A 10-bit 1GS/s 4-way TI SAR ADC with tap-interpolated FIR filter based time skew calibration
Qiu, L., Tang, K., Zhu, Y., Siek, L., Zheng, Y., & Seng‐Pan, U. (2016) · IEEE Asian Solid-State Circuits Conference (A-SSCC) · doi:10.1109/asscc.2016.7844139 · Cited by 11
A 10-b 800MS/s time-interleaved SAR ADC with fast timing-skew calibration
Song, J., Ragab, K., Tang, X., & Sun, N. (2016) · IEEE Asian Solid-State Circuits Conference (A-SSCC) · doi:10.1109/asscc.2016.7844138 · Cited by 11
“In [1], a dedicated reference ADC was used.”
MethodLiang, Y., Zhu, Z., & Ding, R. (2015) · Microelectronics Journal · doi:10.1016/j.mejo.2015.08.008 · Cited by 11
Timing-Skew Calibration Techniques in Time-Interleaved ADCs
Gu, M., Tao, Y., Zhong, Y., Jie, L., & Sun, N. (2024) · IEEE Open Journal of the Solid-State Circuits Society · doi:10.1109/ojsscs.2024.3519486 · Cited by 10
“The alignment can be achieved directly with the help of the signal derivative [9], [20], [21], [22], [26], [27], by maximizing the cross-correlation [23], or by minimizing the variance of differences [24], [25].”
A 2GS/s 8b time-interleaved SAR ADC for millimeter-wave pulsed radar baseband SoC
Miki, T., Ozeki, T., & Naka, J.-I. (2016) · IEEE Asian Solid-State Circuits Conference (A-SSCC) · doi:10.1109/asscc.2016.7844121 · Cited by 10
“A time-interleaved SAR ADC is the only feasible solution to realize both over-GHz operation and middle resolution around 8-bit [3]-[5], however, it induces some mismatch issues among ADC elements (sub-ADCs).”
BackgroundMultichannel Time Skew Calibration for Time-Interleaved ADCs Using Clock Signal
Qiu, L., Zheng, Y., & Siek, L. (2015) · Circuits Systems and Signal Processing · doi:10.1007/s00034-015-0177-3 · Cited by 10
Non-binary Successive Approximation Analog-to-Digital Converters: A Survey
Waho, T. (2014) · IEEE International Symposium on Multiple-Valued Logic (ISMVL) · doi:10.1109/ismvl.2014.21 · Cited by 11
Background analog and mixed signal calibration system for time-interleaved ADC
Khalil, R., Louërat, M., & Petigny, R. (2015) · Microelectronics Journal · doi:10.1016/j.mejo.2015.04.001 · Cited by 10
Nie, K., Yin, Z., & Xu, J. (2016) · Microelectronics Journal · doi:10.1016/j.mejo.2016.11.010 · Cited by 10
“In order to keep the speed advantage and relieve the requirement on the size of capacitors, various digital calibration methods are reported in [10][12,13].”
MethodCircuit Design for Discrete‐Time Delta‐Sigma ADCs
Schreier, R., Pavan, S., & Temes, G. C. (2017) · Wiley eBooks · doi:10.1002/9781119258308.ch7 · Cited by 10
Design of clock generation circuitry for high-speed subranging time-interleaved ADCs
Zahrai, S. A., Dortz, N. L., & Onabajo, M. (2017) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas.2017.8050895 · Cited by 10
“To minimize these clock skews, a clock gating technique [6] has been adapted to generate all sampling clocks from one reference clock and thereby minimize sampling time mismatches.”
Method
Metadata
- Authors
- Stepanovic, D., & Nikolic, B.
- Affiliations
- Agilent Technologies (United States) (US)
- Venue
- IEEE Journal of Solid-State Circuits
- Published
- 2013-04
- Volume
- 48
- Issue
- 4
- Pages
- 971-982
- ISSN
- 0018-9200 (ISSN-L)
- 1558-173X
- OpenAlex
- W2113142084
- Semantic Scholar
- fc0c11f72145fe3c0a3f33d52f4c099ed5704d30
- Cited by
- 192
- References
- 21
- Citations by year
- 2026: 3 · 2025: 6 · 2024: 14 · 2023: 8 · 2022: 17 · 2021: 15 · 2020: 14 · 2019: 16 · 2018: 21 · 2017: 17 · 2016: 18 · 2015: 21 · 2014: 14 · 2013: 8
- FWCI
- 11.22
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Journal of Solid-State Circuits (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Analog and Mixed-Signal Circuit Design
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Radio Frequency Integrated Circuit Design
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in PLL and VCO Technologies
- Keywords
- time-interleaved ADC, successive approximation register ADC, capacitive DAC, thermal noise, capacitor mismatch calibration, digital background calibration, low-power analog-to-digital converter, 65 nm CMOS
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.