A 3.1 mW 8b 1.2 GS/s Single-Channel Asynchronous SAR ADC With Alternate Comparators for Enhanced Speed in 32 nm Digital SOI CMOS
Open accessThe DOI matches its Crossref record; 21 of the 24 references it cites were found in a registry or an index.
Abstract
An 8b 1.2 GS/s single-channel Successive Approximation Register (SAR) ADC is implemented in 32 nm CMOS, achieving 39.3 dB SNDR and a Figure-of-Merit (FoM) of 34 fJ per conversion step. High-speed operation is achieved by converting each sample with two alternate comparators clocked asynchronously and a redundant capacitive DAC with constant common mode to improve the accuracy of the comparator. A low-power, clocked capacitive reference buffer is used, and fractional reference voltages are provided to reduce the number of unit capacitors in the capacitive DAC (CDAC). The ADC stacks the CDAC with the reference capacitor to reduce the area and enhance the settling speed. Background calibration of comparator offset is implemented. The ADC consumes 3.1 mW from a 1 V supply and occupies 0.0015 mm2.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“not only the system becomes more sensitive and error-prone, but also its power consumption increases exponentially as the resolution of DACs and ADCs increase163,164.”
From Hardware implementation of memristor-based artificial neural networks (2024) · cites this paper as [164]
In the citing paper
“not only the system becomes more sensitive and error-prone, but also its power consumption increases exponentially as the resolution of DACs and ADCs increase163,164.”
From Hardware implementation of memristor-based artificial neural networks (2024) · cites this paper as [164]
Citations
Cites
All-MOS charge-redistribution analog-to-digital conversion techniques. II
Suarez, R. E., Gray, P. R., & Hodges, D. A. (1975) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.1975.1050630 · Cited by 655
All-MOS charge redistribution analog-to-digital conversion techniques. I
McCreary, J. L., & Gray, P. R. (1975) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.1975.1050629 · Cited by 607 · cited 1×
“SARADCs have been known for decades [2], [3], but interest in such topologies only increased in recent years.”
BackgroundA low-noise self-calibrating dynamic comparator for high-speed ADCs
Miyahara, M., Asada, Y., Paik, D., & Matsuzawa, A. (2008) · 2008 IEEE Asian Solid-State Circuits Conference · doi:10.1109/asscc.2008.4708780 · Cited by 420 · cited 1×
“This is achieved by not sizing the capacitors in a binary way, as illustrated in Fig.”
MethodA 10b 100MS/s 1.13mW SAR ADC with binary-scaled error compensation
Liu, C.-C., Chang, S.-J., Huang, G.-Y., Lin, Y.-Z., Huang, C.-M., Huang, C.-H., Bu, L., & Tsai, C.-C. (2010) · 2010 IEEE International Solid-State Circuits Conference - (ISSCC) · doi:10.1109/isscc.2010.5433970 · Cited by 316
Noise Analysis of Regenerative Comparators for Reconfigurable ADC Architectures
Nuzzo, P., De Bernardinis, F., Terreni, P., & Van der Plas, G. (2008) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2008.917991 · Cited by 305 · cited 1×
“It is assumed that each constants ( ) for a settling error 0.5 LSB. unit capacitor has its own buffer and that therefore the driver strength is proportional to the switched capacitance.”
BackgroundInfluentialStepanovic, D., & Nikolic, B. (2013) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2013.2239005 · Cited by 192 · cited 1×
“In addition, multi-bit/cycle reduces the advantages of redundancy and asynchronous timing.”
BackgroundA 32 mW 1.25 GS/s 6b 2b/Step SAR ADC in 0.13$\ \mu$m CMOS
Cao, Z., Yan, S., & Li, Y. (2009) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2008.2012329 · Cited by 160
Jiang, T., Liu, W., Zhong, F. Y., Zhong, C., Hu, K., & Chiang, P. Y. (2012) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2012.2204543 · Cited by 134
A 1 GS/s 6 Bit 6.7 mW Successive Approximation ADC Using Asynchronous Processing
Yang, J., Naing, T. L., & Brodersen, R. W. (2010) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2010.2048139 · Cited by 119
Research works printed but not linked: 3
- maloberti, 2007, Data Converters
- murmann, 2013, ?ADC Performance Survey 1997?2013 ?
- 2012, All papers from IEEE Xplore with search term ?SAR ADC? and at least 6b resolution
Cited by
Items 101–200 of 346
An Energy-Efficient Inference Engine for a Configurable ReRAM-Based Neural Network Accelerator
Zheng, Y.-L., Yang, W.-Y., Chen, Y.-S., & Han, D.-H. (2022) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2022.3184464 · Cited by 16
“Different from the architecture proposed in ISAAC, to enable run-time reference voltage scaling, we replace the ADCs with voltage scalable ADCs by adding multiple voltages to the multiplexer in the reference buffer as proposed in [17].”
BackgroundMethodLuu, D., Kull, L., Toifl, T., Menolfi, C., Brändli, M., Francese, P. A., Morf, T., Kossel, M., Yueksel, H., Cevrero, A., et al. (2017) · Symposium on VLSI Circuits · doi:10.23919/vlsic.2017.8008506 · Cited by 15
“As speed, offset, and noise of the comparators are CMdependent, a constant common-mode differential CDAC is used [6].”
MethodSelf-citationOshita, T., Shor, J. S., Duarte, D. E., Kornfeld, A., Geannopoulos, G. L., Douglas, J., & Kurd, N. A. (2016) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2015.2501424 · Cited by 14
SAR-Assisted Energy-Efficient Hybrid ADCs
Lozada, K. E., Chang, D.-J., Oh, D., Seo, M.-J., & Ryu, S. (2024) · IEEE Open Journal of the Solid-State Circuits Society · doi:10.1109/ojsscs.2024.3472000 · Cited by 20
“These include decision redundancies [21], [22], [23], asynchronous conversions [24], metastability detection [25], the use of multiple comparators [26], and loop unrolling [27].”
BackgroundUran, A., Leblebici, Y., Emami, A., & Cevher, V. (2020) · IEEE Solid-State Circuits Letters · doi:10.1109/lssc.2020.3013993 · Cited by 16
“3(c) leverages the constant common-mode monotonic switching scheme [12] to reduce”
BackgroundSelf-citationA High-Speed 2-bit/Cycle SAR ADC With Time-Domain Quantization
Qiu, L., Yang, C., Wang, K., & Zheng, Y. (2018) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2018.2837030 · Cited by 14
“Similar to conventional SAR ADCs, the Voff_in is a systematic offset, which does not affect the ENOB.”
BackgroundA 56-Gb/s Long-Reach Fully Adaptive Wireline PAM-4 Transceiver in 7-nm FinFET
Pfaff, D., Wang, X., Palusa, C., Abbott, R., Moazzeni, S., Gao, L., Chuang, M.-C., Ramirez, R., Amer, M., & Goh, T. Y. (2019) · IEEE Solid-State Circuits Letters · doi:10.1109/lssc.2019.2953840 · Cited by 14
“To avoid excessive comparator latency, the input common mode is kept constant by the balanced version of the set-and-down switching principle [5].”
MethodThe design of analogue in-memory computing tiles
Singh, A., Gallo, M. L., Vasilopoulos, A., Luquin, J., Narayanan, P., Burr, G. W., & Sebastian, A. (2025) · Nature Electronics · doi:10.1038/s41928-025-01537-5 · Cited by 21
Nani, C., Monaco, E., Ghittori, N., Bosi, A., Albano, D., Asero, C., Codega, N., Pasquo, A. D., Fabiano, I., Garampazzi, M., et al. (2024) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2024.3517333 · Cited by 14
“Furthermore, offset mismatches between the two comparators introduce conversion errors in the last decisions, hence requiring offset calibration [18], [19].”
Comparator offset calibration using unbalanced clocks for high speed and high power efficiency
Chiang, S.-H. W. (2016) · Electronics Letters · doi:10.1049/el.2016.1157 · Cited by 13
Narayanan, P., Sanches, L. L., Fumarola, A., Shelby, R. M., Ambrogio, S., Jang, J., Hwang, H., Leblebici, Y., & Burr, G. W. (2017) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas.2017.8050988 · Cited by 13
Self-citationBuhr, S., Matthus, C. D., Khafaji, M. M., & Ellinger, F. (2023) · IEEE Transactions on Microwave Theory and Techniques · doi:10.1109/tmtt.2023.3251570 · Cited by 15
“This introduces redundancy in the CDAC similar to [15] and is a well-known technique to increase the conversion speed of SAR ADCs by allowing partial settling of the CDAC.”
BackgroundMethodInfluentialZhao, H., Zhang, M., Zhu, Y., Martins, R. P., & Chan, C. (2023) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2023.3306789 · Cited by 12
“To speed up such architecture, multi-bit quantization can be employed in each cycle [4], [5], [10], [11], [12], [13], [14], as opposed to single bit with extra comparators [6], [7], [8], [9].”
MethodWang, Z., Luo, T., Liu, C., Liu, W., Goh, R. S. M., & Wong, W. (2024) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2024.3483654 · Cited by 19
“The substantial area overhead caused by implementing input and output circuits (e.g., DACs and ADCs) within the memristor crossbar, as noted in previous studies [25, 26], diminishes the advantage of the high density offered by RRAM devices in comparison to alternative techniques.”
ResultATT: A Fault-Tolerant ReRAM Accelerator for Attention-based Neural Networks
Guo, H., Peng, L., Zhang, J., Chen, Q., & LeCompte, T. (2020) · IEEE International Conference on Computer Design: VLSI in Computers and Processors (ICCD) · doi:10.1109/iccd50377.2020.00047 · Cited by 19
A 56 GS/s 8 Bit Time-Interleaved ADC in 28 nm CMOS
Luan, J., Zheng, X., Wu, D., Zhang, Y., Wu, L., Zhou, L., Wu, J., & Liu, X. (2022) · Electronics · doi:10.3390/electronics11050688 · Cited by 11
A Predictive SAR ADC Architecture
Jara, M., & Razavi, B. (2025) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2025.3525619 · Cited by 13
Digital Amplifier: A Power-Efficient and Process-Scaling Amplifier for Switched Capacitor Circuits
Yoshioka, K., Itakura, T., Sugimoto, T., Waki, N., Kim, S., Kurose, D., Ishii, H., Furuta, M., Sai, A., & Ishikuro, H. (2019) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2019.2924686 · Cited by 11
“Moreover, SA conversions are very fast in scaled processes [21], and the amplifier speed is likely not to be limited by DA.”
BackgroundAsynchronous Event-Driven Clocking and Control in Pipelined ADCs
Hershberg, B. P., van Liempd, B., Markulić, N., Lagos, J. L., Martens, E., Dermit, D., & Craninckx, J. (2021) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2021.3077881 · Cited by 11
“It is already well known that asynchronous event-driven clocking techniques can provide speed and power advantages in SAR and pipelined-SAR ADCs [5]–[9].”
BackgroundA Low-Power DNN Accelerator Enabled by a Novel Staircase RRAM Array
Veluri, H., Chand, U., Li, Y., Tang, B., & Thean, A. (2021) · IEEE Transactions on Neural Networks and Learning Systems · doi:10.1109/tnnls.2021.3118451 · Cited by 10
“4 (e)] are taken from [42].”
Liu, H., Xing, X., & Gielen, G. E. (2019) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2019.2894034 · Cited by 14
“clocking to shorten the conversion time by eliminating the waiting time needed for the SAR operation [16].”
BackgroundA 6-Bit, 29.56 fJ/Conv-Step, Voltage Scalable Flash-SAR Hybrid ADC in 28 nm CMOS
Kumar, B. D., Shrimali, H., & Gupta, N. (2019) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas.2019.8702482 · Cited by 11
“Moreover, time interleaving [6]–[8], alternating comparator [9] and multi-channel ADC techniques [10] are employed for broad bandwidth requirements.”
MethodModeling and Optimization of Plasmonic Detectors for Beyond-CMOS Plasmonic Majority Logic Gates
Noor, S. L., Dens, K., Reynaert, P., Catthoor, F., Lin, D. H.-C., Dorpe, P. V., & Naeemi, A. (2020) · Journal of Lightwave Technology · doi:10.1109/jlt.2020.2998014 · Cited by 11
“of state-of-the-art comparators is around 1 mV root mean square (rms) [39], so a few mV’s of signal swing are required to have a large signal-to-noise ratio (SNR) ensuring a low bit-error-rate.”
BackgroundA 36.4dB SNDR @ 5GHz 1.25GS/s 7b 3.56mW single-channel SAR ADC in 28nm bulk CMOS
Ramkaj, A. T., Strackx, M., Steyaert, M. S. J., & Tavernier, F. (2017) · European Solid-State Circuits Conference (ESSCIRC) · doi:10.1109/esscirc.2017.8094552 · Cited by 12
“This Work Wei ISSCC’11[1] Kull ISSCC’13[2] Le Tual ISSCC’14[3] Chan ISSCC’15[4] Choo ISSCC’16[6]”
BackgroundMethodBheemisetti, C., Pandey, K., Lotan, I., Ori, G., Khairi, A., Krupnik, Y., Virobnik, U., Boyapati, S., Cohen, A., & Krishnapura, N. (2024) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2024.3449115 · Cited by 13
“In a conventional SAR topology (which uses one [12], [13] or two comparators [14]), conversion time and power are wasted on comparator resetting, memory, and complex cycle-to-cycle control logic.”
An Effective Transconductance Controlled Offset Calibration for Dynamic Comparators
Lee, J. H., Lim, Y., Sung, B., Oh, S., Chun, J., & Lee, J. (2020) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas45731.2020.9180938 · Cited by 10
CMOS ADCs Towards 100 GS/s and Beyond
Kull, L., Luu, D., Francese, P. A., Menolfi, C., Brändli, M., Kossel, M., Morf, T., Cevrero, A., Özkaya, İ., Yueksel, H., et al. (2016) · Technical digest -- IEEE Compound Semiconductor Integrated Circuit Symposium · doi:10.1109/csics.2016.7751033 · Cited by 10
“Techniques to improve conversion speeds of SAR ADCs have been shown [6 8], which result in a significant smaller number of sub-ADCs required for a given sampling speed.”
Self-citationA 10-bit 300 MS/s 5.8 mW SAR ADC With Two-Stage Interpolation for PET Imaging
Qiu, L., Wang, K., Tang, K., Siek, L., & Zheng, Y. (2018) · IEEE Sensors Journal · doi:10.1109/jsen.2018.2790581 · Cited by 11
A 10-bit 1.2 GS/s 45 mW time-interleaved SAR ADC with background calibration
Xu, D., Pu-Jie, Xu, S., Zhang, Z., Kai-rang, C., Yi-yi, C., Zhang, J., & Jian-an, W. (2018) · IEICE Electronics Express · doi:10.1587/elex.15.20171235 · Cited by 10
“Tow comparators work alternately to prolong the compare time in [4] and meta-stability of comparator is depressed.”
BackgroundEfficient Organization of Digital Periphery to Support Integer Datatype for Memristor-Based CIM
Zahedi, M., Mayahinia, M., Lebdeh, M. A., Wong, S., & Hamdioui, S. (2020) · IEEE Computer Society Annual Symposium on VLSI · doi:10.1109/isvlsi49217.2020.00047 · Cited by 10
“The latency and energy numbers related to the crossbar (assumed to use ReRAM for now) and (SAR) ADCs are taken from [21] and [22], respectively.”
BackgroundResistive Crossbar-Aware Neural Network Design and Optimization
Hanif, M. A., Manglik, A., & Shafique, M. (2020) · IEEE Access · doi:10.1109/access.2020.3045071 · Cited by 14
“Reducing the number of columns lowers the number of ADC sampling cycles needed to process results from all targets in a crossbar, which may be used to lower the ADC sampling rate (decreasing power proportionately) [84], [85].”
BackgroundIizuka, T., Xu, H., & Abidi, A. A. (2021) · European Solid-State Circuits Conference (ESSCIRC) · doi:10.1109/esscirc53450.2021.9567842 · Cited by 10
Chen, X., Zhu, J., Jiang, J., & Tsui, C.-Y. (2019) · Asia and South Pacific Design Automation Conference (ASP-DAC) · doi:10.1145/3287624.3287640 · Cited by 14
Chan, C., Zhang, M., Cao, Y., Zhao, H., Martins, R. P., & Zhu, Y. (2024) · Custom Integrated Circuits Conference · doi:10.1109/cicc60959.2024.10528981 · Cited by 11
Ye, S., Gao, J., Li, J., Chen, Z., Xu, X., Cui, J., Luan, Y., Ye, L., Zhang, X., Huang, R., et al. (2024) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2024.3497175 · Cited by 9
Lee, S.-W., Kang, H., & Lee, M. (2024) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2024.3510883 · Cited by 10
Park, H., Nehal, Q., Gandara, M., Atharav, A., Lee, J., Li, J., & Ali, T. (2025) · Digest of technical papers/Digest of technical papers - IEEE International Solid-State Circuits Conference · doi:10.1109/isscc49661.2025.10904638 · Cited by 9
“7.4.4 guarantees redundancy for the first 5 bits (B[7:3]) but the last three LSBs are binary coded as their settling speed is typically much faster than MSB’s settling speed [4].”
InfluentialPaulsen, L. M., Hoffmann, T., Fulton, C. J., Yeary, M. B., Saunders, A., Thompson, D., Chen, B., Guo, A., & Murmann, B. (2015) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.2179712 · Cited by 9
“, [3]).”
IM3A: Boosting Deep Neural Network Efficiency via I n- M emory A ddressing- A ssisted A cceleration
Liu, F., Zhao, W., Wang, Z., Yang, T., & Jiang, L. (2021) · ACM Great Lakes Symposium on VLSI (GLSVLSI) · doi:10.1145/3453688.3461491 · Cited by 9
“For the ADC part, we refer to the works on 8-bi ADC designt [8] since the resolution and frequency satisfy the experimental requirements.”
MethodA 6-bit 2GS/s CMOS time-interleaved ADC for analysis of mixed-signal calibration techniques
Reyes, B. T., Tealdi, L., Paulina, G., Labat, E., Sanchez, R. M., Mandolesi, P. S., & Hueda, M. R. (2014) · IEEE Latin American Symposium on Circuits and Systems (LASCAS) · doi:10.1109/lascas.2014.6820267 · Cited by 9
“A similar scheme has been used recently in [13].”
MethodAERIS: area/energy-efficient 1T2R ReRAM based processing-in-memory neural network system-on-a-chip
Yue, J., Liu, Y., Su, F., Li, S., Yuan, Z., Wang, Z., Sun, W., Li, X., & Yang, H. (2019) · Asia and South Pacific Design Automation Conference (ASP-DAC) · doi:10.1145/3287624.3287635 · Cited by 10
Circuit Design for Discrete‐Time Delta‐Sigma ADCs
Schreier, R., Pavan, S., & Temes, G. C. (2017) · Wiley eBooks · doi:10.1002/9781119258308.ch7 · Cited by 10
A 2.4 GS/s 10-Bit Time-Interleaved SAR ADC with a Bypass Window and Opportunistic Offset Calibration
Fan, Q., & Chen, J. (2019) · European Solid-State Circuits Conference (ESSCIRC) · doi:10.1109/esscirc.2019.8902620 · Cited by 8
“To enhance the operation speed, two alternate comparators are adopted in each ADC channel as in [4].”
MethodGuo, M., Qi, L., Zhao, W., Xiao, G., Martins, R. P., & Sin, S. (2023) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2023.3303043 · Cited by 12
Iizuka, T., Takenaka, R., Xu, H., & Abidi, A. A. (2024) · IEEE Open Journal of the Solid-State Circuits Society · doi:10.1109/ojsscs.2024.3469109 · Cited by 9
Park, Y., Hung, P. D., Youn, D., Kwon, D., Kim, C., & Je, M. (2025) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2025.3611278 · Cited by 10
“Two comparators operate in an alternating fashion [26] to improve peak detection accuracy and minimize detection blind spots.”
SUPPORTING ENERGY-BASED LEARNING WITH AN ISING MACHINE SUBSTRATE: A CASE STUDY ON RBM
Vengalam, U. K. R., Liu, Y., Geng, T., Wu, H. X., & Huang, M. C. Y. (2023) · IEEE/ACM International Symposium on Microarchitecture (MICRO) · doi:10.1145/3613424.3614315 · Cited by 11
Chen, X., Jiang, J., Zhu, J., & Tsui, C.-Y. (2018) · doi:10.5555/3201607.3201633 · Cited by 8
Design of a High-Speed Time-Interleaved Sub-Ranging SAR ADC With Optimal Code Transfer Technique
Xing, D., Zhu, Y., Chan, C., Maloberti, F., Seng‐Pan, U., & Martins, R. P. (2018) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2018.2866958 · Cited by 8
“2 shows, it is possible to alternate two comparators for speeding up the conversion [12].”
BackgroundMethodInfluentialOptimal Weight‐Splitting in Resistive Random Access Memory‐Based Computing‐in‐Memory Macros
Song, C., Kim, J., & Jeong, D. S. (2022) · Advanced Intelligent Systems · doi:10.1002/aisy.202200289 · Cited by 7
Chen, P., Wu, M., Ma, Y., Ye, L., & Huang, R. (2023) · Asia and South Pacific Design Automation Conference (ASP-DAC) · doi:10.1145/3566097.3567860 · Cited by 8
“[3 ,3 ,3 2] ×(3) 2 Feature [28,28,16] Feature [28,28,32] L3 D ig ita l”
ResultHe, J., Huang, Y., Lastras-Montaño, M. Á., Ye, T. T., Tsui, C.-Y., & Cheng, K.-T. T. (2023) · Asia and South Pacific Design Automation Conference (ASP-DAC) · doi:10.1145/3566097.3567858 · Cited by 7
“The TIA and current mirror are implemented in Cadence Virtuoso using 32 nm process for accurate power and area estimation, while the area and power numbers of the ADC and S&H are obtained from [2] and [12], respectively.”
MethodEfficient Signed Arithmetic Multiplication on Memristor-Based Crossbar
Zahedi, M., Shahroodi, T., Wong, S., & Hamdioui, S. (2023) · IEEE Access · doi:10.1109/access.2023.3263259 · Cited by 8
“The power consumption for ADC was obtained from [59].”
BackgroundMethodSparseMEM: Energy-efficient Design for In-memory Sparse-based Graph Processing
Zahedi, M., Custers, G., Shahroodi, T., Gaydadjiev, G. N., Wong, S., & Hamdioui, S. (2023) · Design, Automation, and Test in Europe · doi:10.23919/date56975.2023.10137303 · Cited by 8
“The parameters for ADCs are taken from [19] given in 32 nm technology, and the resolution of the input drivers for the crossbars are 1-bit [20].”
BackgroundFPIA: Field-Programmable Ising Arrays with In-Memory Computing
Hutchinson, G. H., Sifferman, E., Bhattacharya, T., Kwon, D., & Strukov, D. B. (2024) · International Symposium on Low Power Electronics and Design (ISLPED) · doi:10.1145/3665314.3670851 · Cited by 12
“We assume, however, that some time-multiplexing of programming circuitry can be exploited without bottle-necking overall operation ( 𝑆 ).”
A 10-bit 150MS/s current mode SAR ADC in 90nm CMOS
Elkafrawy, A., Anders, J., & Ortmanns, M. (2015) · Conference on Ph.D. Research in Microelectronics and Electronics · doi:10.1109/prime.2015.7251388 · Cited by 7
“reported on time-interleaved/asynchronous charge based SAR ADCs to achieve high sampling rates with excellent power efficiency [1], [2].”
BackgroundA 12.5-fJ/Conversion-Step 8-Bit 800-MS/s Two-Step SAR ADC
Hu, Y.-S., Huang, P.-C., Tai, H.-Y., & Chen, H. (2016) · IEEE Transactions on Circuits & Systems II Express Briefs · doi:10.1109/tcsii.2016.2608908 · Cited by 7
“Multibit per cycle [5], [6] or multicomparator [7], [8] technique reduces digital loop time to enhance the speed of SAR ADCs.”
BackgroundA 2GS/s 6-bit CMOS time-interleaved ADC for analysis of mixed-signal calibration techniques
Reyes, B. T., Paulina, G., Sanchez, R. M., Mandolesi, P. S., & Hueda, M. R. (2015) · Analog Integrated Circuits and Signal Processing · doi:10.1007/s10470-015-0578-z · Cited by 8
HO-FPIA: High-Order Field-Programmable Ising Arrays with In-Memory Computing
Bhattacharya, T., Hutchinson, G. H., Pedretti, G., & Strukov, D. B. (2024) · IEEE Computer Society Annual Symposium on VLSI · doi:10.1109/isvlsi61997.2024.00054 · Cited by 6
“For f clk =100Mhz (a reasonable assumption considering up to 2.5ns operation of crossbars comprising of the considered coupling cell technologies [21,22]) and 1.2 Gsamples/s ADC [23], K has to be 22 to convert all 256 analog dot-products in one cycle.”
MethodInfluentialChan, C., Zhu, Y., Iok-Meng, H., Zhang, W.-H., Chon-Lam, L., Seng‐Pan, U., & Martins, R. P. (2016) · IEEE Asian Solid-State Circuits Conference (A-SSCC) · doi:10.1109/asscc.2016.7844156 · Cited by 8
Exploiting In-Memory Data Patterns for Performance Improvement on Crossbar Resistive Memory
Wen, W., Zhao, L., Zhang, Y., & Yang, J. (2019) · IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems · doi:10.1109/tcad.2019.2940685 · Cited by 6
“We followed recent studies [39], [45] to estimate the power and area overheads of adopting ADC and sampling and holding circuits.”
MethodFang, L., Fu, T., Wen, X., & Gui, P. (2022) · IEEE Solid-State Circuits Letters · doi:10.1109/lssc.2022.3193851 · Cited by 6
An 8-bit 500-MS/s asynchronous single-channel SAR ADC in 65 nm CMOS
Zhang, L., Li, D., Zhu, Z., & Yang, Y. (2015) · Analog Integrated Circuits and Signal Processing · doi:10.1007/s10470-015-0512-4 · Cited by 6
“Asynchronous technique is another effective way to shorten the conversion time [4–6].”
MethodModeling of High-Resolution Data Converter: Two-Step Pipelined-SAR ADC based on ISDM
Gao, B., Li, X., Sun, J., & Wu, J. (2020) · Electronics · doi:10.3390/electronics9010137 · Cited by 6
“The dynamic latch stage adopted PMOS as an input-pair instead of connecting the input to the cross-coupled nodes of latch directly, which helped reduce kick-back noise to the top plate of DAC further [26].”
MethodA Low-Power 9-Bit 222 MS/s Asynchronous SAR ADC in 65 nm CMOS
Akkaya, A., Çelik, F., & Leblebici, Y. (2020) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas45731.2020.9180941 · Cited by 6
Self-citationBunsen, K., Martens, E., Dermit, D., & Craninckx, J. (2020) · IEEE Transactions on Circuits & Systems II Express Briefs · doi:10.1109/tcsii.2020.3046091 · Cited by 6
“ground calibration often requires additional analog blocks [3], [7] and/or dedicated conversion steps [4], [8], which leads to a degradation of the power efficiency and conversion speed.”
BackgroundEliahu, A., Ronen, R., Gaillardon, P., & Kvatinsky, S. (2021) · ACM Journal on Emerging Technologies in Computing Systems · doi:10.1145/3432815 · Cited by 7
An Auxiliary-Loop-Enhanced Fast-Transient FVF LDO as Reference Buffer of a SAR ADC
Zeng, Y., Chan, C., Zhu, Y., & Martins, R. P. (2022) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas48785.2022.9937923 · Cited by 6
“Reference [4] presented a clocked capacitive reference buffer, utilizing a clocked comparator with the reset signal of the CDAC as the control clock; however, a large reference capacitor is necessary to charge the CDAC, leading to large area consumptions.”
BackgroundMethodSong, C. E., Bhatnagar, P., Xia, Z., Kim, N. S., Rosing, T., & Kang, M. (2025) · Proceedings - International Symposium on Computer Architecture/Proceedings · doi:10.1145/3695053.3731109 · Cited by 13
“By applying SVD and truncation, we expose the importance of weight elements and concentrate critical weights into a smaller subset through fine-tuning.”
A First-Order Noise-Shaping SAR ADC with PVT-Insensitive Closed-Loop Dynamic Amplifier and Two CDACs
Nam, J., Hwang, Y., Kim, J., Kim, J., & Park, S. (2024) · Electronics · doi:10.3390/electronics13091758 · Cited by 8
Analysis of Passive Charge Sharing-Based Segmented SAR ADCs
Wang, A., & Shi, C. ‐. R. (2020) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2020.2979500 · Cited by 5
“Combined with pipeline [5], [6], time interleaving [6], and noise shaping [7], SAR ADCs are being extended to applications with even higher speed up to GHz [8] or higher resolution up to 18 bits [9].”
MethodTechniques for offset calibration in comparators
Cheng, Y., & Tong, Y. (2021) · International Conference on Electronic Information Engineering and Computer Science (EIECS) · doi:10.1109/eiecs53707.2021.9588097 · Cited by 6
A Speed-Enhancing Dual-Trial Instantaneous Switching Architecture for SAR ADCs
He, L., Yang, J., Luo, D., Jin, L., Zhang, S., Lin, F., Yao, L., & Jiang, X. (2014) · IEEE Transactions on Circuits & Systems II Express Briefs · doi:10.1109/tcsii.2014.2362722 · Cited by 5
“[7] uses two comparators to alternatively compare and reset so that the comparator reset time can be removed from the critical path.”
MethodCMOS low-power transceivers for 60GHz multi Gbit/s communications
Vidojković, V., Szortyka, V., Khalaf, K., Mangraviti, G., Parvais, B., Vaesen, K., Brebels, S., Spagnolo, A., Libois, M., Long, J. R., et al. (2013) · Custom Integrated Circuits Conference · doi:10.1109/cicc.2013.6658410 · Cited by 5
An 8-bit 900MS/S two-step SAR ADC
Huang, P.-C., Hu, Y.-S., Tai, H.-Y., & Chen, H. (2016) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas.2016.7539201 · Cited by 5
“In this work, an asynchronous two-step single-channel SAR ADC using a charge sharing technique and a self-triggered-latch (STL) technique is proposed to accelerate the conversion rate and reduce the power consumption.”
BackgroundInfluentialA DAC assisted speed enhancement technique for high resolution SAR ADC
Kilic, M. S., & Leblebici, Y. (2017) · Conference on Ph.D. Research in Microelectronics and Electronics · doi:10.1109/prime.2017.7974155 · Cited by 6
Self-citationSu, Z., Wang, H., Zhao, H., Liu, X., & Dai, F. F. (2019) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas.2019.8702299 · Cited by 5
“Another set of the capacitor array is added [5] which allows a differential capacitor switching.”
BackgroundMethodA 500 MS/s 10-Bit Single-Channel SAR ADC with A Double-Rate Comparator
Fan, Q., Zhang, R., Bikkina, P., Mikkola, E., & Chen, J. (2019) · European Solid-State Circuits Conference (ESSCIRC) · doi:10.1109/esscirc.2019.8902706 · Cited by 5
“In case different results are observed from the two comparisons, indicating the existence of offset mismatch, the body bias voltages of the inverter stage will be adjusted with a charge pump-based circuit [5] towards the direction where the offset mismatch is minimized.”
BackgroundA 6 mW 325 MS/s 8 bit SAR ADC with background offset calibration
Zhu, X., Wu, D., Zhou, L., Ma, C., Wang, D., Luan, J., Huang, Y., Wu, J., & Liu, X. (2017) · IEICE Electronics Express · doi:10.1587/elex.14.20170329 · Cited by 5
FPRA: A Fine-grained Parallel RRAM Architecture
Liu, X., Zhou, M., Ausavarungnirun, R., Eilert, S., Akel, A., Rosing, T., Narayanan, V., & Zhao, J. (2021) · International Symposium on Low Power Electronics and Design (ISLPED) · doi:10.1109/islped52811.2021.9502474 · Cited by 6
Optimizing ADC Utilization through Value-Aware Bypass in ReRAM-based DNN Accelerator
Yun, H., Shin, H., Kang, M., & Kim, L. (2021) · ACM/IEEE Design Automation Conference (DAC) · doi:10.1109/dac18074.2021.9586140 · Cited by 5
A Hybrid Voltage-Time Domain Pipelined ADC With Reference-Embedded Time-Domain Residues
Lim, J.-G., Boo, J., Lee, J. S., Kim, H., Yu, B., Cho, K.-I., Lee, S., Moon, U.-K., & Ahn, G. (2025) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2025.3579913 · Cited by 4
“R ) hybrid DAC method [21], [22] to reduce the number of capacitors, which alleviates the load by the input sampling capacitors.”
PointCIM: A Computing-in-Memory Architecture for Accelerating Deep Point Cloud Analytics
Chen, X.-J., Chen, H.-P., & Yang, C.-L. (2024) · IEEE/ACM International Symposium on Microarchitecture (MICRO) · doi:10.1109/micro61859.2024.00097 · Cited by 8
“We use the same style of ADC [23] as in ISAAC but follow the equation in [46] to scale the ADC power consumption for a higher or lower bit resolution.”
Park, Y., Hung, P. D., Youn, D., Kwon, D., Kim, C., & Je, M. (2025) · Digest of technical papers/Digest of technical papers - IEEE International Solid-State Circuits Conference · doi:10.1109/isscc49661.2025.10904522 · Cited by 4
Meta‐stability immunity technique for high speed SAR ADCs
Qiu, L., Tang, K., Zheng, Y. J., & Siek, L. (2017) · Electronics Letters · doi:10.1049/el.2016.4001 · Cited by 4
Analysis of strong-arm comparator with auxiliary pair for offset calibration
Li, S., Xu, Z., & Iizuka, T. (2022) · Analog Integrated Circuits and Signal Processing · doi:10.1007/s10470-022-01992-6 · Cited by 4
An 8-bit 1.5-GS/s Two-Step SAR ADC With Embedded Interstage Gain
Shen, Y., Hao, J., Liu, S., An, Z., Li, D., Ding, R., & Zhu, Z. (2023) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2023.3302842 · Cited by 4
“In the advanced CMOS process, the medium-resolution single-channel SAR ADC has gone beyond 1 GS/s [3], [4].”
BackgroundAdopting multi-valued logic for reduced pin-count testing
Li, B., Zhang, B., & Agrawal, V. D. (2015) · IEEE Latin American Test Symposium (LATS) · doi:10.1109/latw.2015.7102497 · Cited by 4
“As technology advances, we observe that ADC designs [15] for data communication show greater economy of area and power, leading us to believe that we will be able to control the overhead and power of the MVL application to remain under acceptable limits in the future.”
BackgroundQiu, L., Liu, S., Zhang, Y., Zhu, Y. H., Tang, K., & Zheng, Y. (2017) · IEEE Sensors Journal · doi:10.1109/jsen.2017.2760339 · Cited by 4
A 700-MS/s 6-bit SAR ADC with partially active reference voltage buffer
Zhao, L., Li, B., & Cheng, Y. (2018) · IEICE Electronics Express · doi:10.1587/elex.15.20180497 · Cited by 4
A 25-GS/s 6-bit time-interleaved SAR ADC with design-for-test memory in 40-nm low-leakage CMOS
Zhao, L., Li, B., & Cheng, Y. (2019) · International Journal of Electronics · doi:10.1080/00207217.2019.1570557 · Cited by 4
“The SAR logic is similar to the previous work (Kull et al., 2013).”
MethodResultA 4-GS/s Digitally Interpolated 8-Bit Concurrent Binary Search ADC
Dey, S., Aurangozeb, F., Shukla, R., & Hossain, M. (2020) · IEEE Solid-State Circuits Letters · doi:10.1109/lssc.2020.3024290 · Cited by 4
“In a traditional 1-bit/cycle SAR, resolving 8 bits requires ten cycles, including redundancy and offset correction [2].”
BackgroundMethodInfluentialAn 8b 5-GS/s CMOS SAR ADC with speed optimized SAR logic
Shah, A. M. K., & Sahoo, B. D. (2017) · IEEE International Midwest Symposium on Circuits and Systems (MWSCAS) · doi:10.1109/mwscas.2017.8053210 · Cited by 5
“SAR ADCs are ideal for this application as they consist mainly of digital components that benefit from technology scaling in low-voltage CMOS processes and thus provide a high speed-to-area ratio [3].”
BackgroundMethodLiu, S., Paramesh, J., Pileggi, L., Rabuske, T. G., & Fernandcs, J. (2018) · European Solid-State Circuits Conference (ESSCIRC) · doi:10.1109/esscirc.2018.8494253 · Cited by 4
“The first two MSB comparators, X4 and X3, work alternately [9] to resolve the first 8 bits, b<12:5>, which allows the removal of comparator reset time from SAR cycles.”
BackgroundAn 8-bit 400-MS/s Asynchronous SAR ADC with Single-ended/Differential Configurable Input Mode
Zhang, L., Chang, M., Kuang, Q., & Zhang, D. (2018) · International Conference on Integrated Circuits and Microsystems (ICICM) · doi:10.1109/icam.2018.8596574 · Cited by 4
Analysis of Bitwise and Samplewise Switched Passive Charge Sharing SAR ADCs
Shi, C. ‐. R., & Wang, A. (2019) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/tvlsi.2019.2909671 · Cited by 4
“2909671 higher speed up to gigahertz [11] or higher resolution up to 18 bits [12].”
BackgroundSingle-Bin DFT-Based Digital Calibration Technique for CDAC in SAR ADCs
Lee, S.-Y., Tsou, C., & Li, Y. (2019) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2019.2938242 · Cited by 4
“Hence, numerous techniques [1], [2] have been proposed to overcome performance limitations caused by comparator offset.”
BackgroundA 1 GS/s 12-Bit Pipelined/SAR Hybrid ADC in 40 nm CMOS Technology
Li, J., Guo, X., Luan, J., Wu, D., Zhou, L., Wu, N., Huang, Y., Jia, H., Zheng, X., Wu, J., et al. (2020) · Electronics · doi:10.3390/electronics9020375 · Cited by 6
“The offset voltage cancellation of this comparator is implemented by a fast, low power self-calibrating technique [28].”
BackgroundMethodInfluentialA 39GHz Bandwidth, 2.5GS/s 7-bit SAR ADC in 22nm FDSOI CMOS
Checca, E., & Voinigescu, S. P. (2021) · IEEE MTT-S International Microwave Symposium digest · doi:10.1109/ims19712.2021.9575004 · Cited by 4
Hu, B., Ren, F., Chen, Z.-Z., Jiang, X., & Chang, M.-C. F. (2016) · IEEE Transactions on Circuits & Systems II Express Briefs · doi:10.1109/tcsii.2016.2538378 · Cited by 5
Metadata
- Authors
- Kull, L., Toifl, T., Schmatz, M., Francese, P. A., Menolfi, C., Brandli, M., Kossel, M., Morf, T., Andersen, T. M., & Leblebici, Y.
- Affiliations
- École Polytechnique Fédérale de Lausanne (CH)
- IBM Research - Zurich (CH)
- Venue
- IEEE Journal of Solid-State Circuits
- Published
- 2013-12
- Volume
- 48
- Issue
- 12
- Pages
- 3049-3058
- ISSN
- 0018-9200 (ISSN-L)
- 1558-173X
- OpenAlex
- W2155589054
- Cited by
- 347
- References
- 24
- Citations by year
- 2026: 21 · 2025: 28 · 2024: 22 · 2023: 27 · 2022: 23 · 2021: 21 · 2020: 29 · 2019: 33 · 2018: 34 · 2017: 36 · 2016: 31 · 2015: 19 · 2014: 17 · 2013: 6
- FWCI
- 13.43
- Type
- journal article
- Language
- en
- Open access
- green
- infoscience.epfl.ch
- Locations
- IEEE Journal of Solid-State Circuits (publishedVersion)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion, cc-by-nc-nd)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Analog and Mixed-Signal Circuit Design
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Radio Frequency Integrated Circuit Design
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Low-power high-performance VLSI design
- Keywords
- successive approximation register ADC, high-speed ADC, capacitive DAC, reference buffer, comparator offset calibration, low-power analog-to-digital converter, 32nm CMOS
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.