A 3.1 mW 8b 1.2 GS/s Single-Channel Asynchronous SAR ADC With Alternate Comparators for Enhanced Speed in 32 nm Digital SOI CMOS
Open accessThe DOI matches its Crossref record; 21 of the 24 references it cites were found in a registry or an index.
Abstract
An 8b 1.2 GS/s single-channel Successive Approximation Register (SAR) ADC is implemented in 32 nm CMOS, achieving 39.3 dB SNDR and a Figure-of-Merit (FoM) of 34 fJ per conversion step. High-speed operation is achieved by converting each sample with two alternate comparators clocked asynchronously and a redundant capacitive DAC with constant common mode to improve the accuracy of the comparator. A low-power, clocked capacitive reference buffer is used, and fractional reference voltages are provided to reduce the number of unit capacitors in the capacitive DAC (CDAC). The ADC stacks the CDAC with the reference capacitor to reduce the area and enhance the settling speed. Background calibration of comparator offset is implemented. The ADC consumes 3.1 mW from a 1 V supply and occupies 0.0015 mm2.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“not only the system becomes more sensitive and error-prone, but also its power consumption increases exponentially as the resolution of DACs and ADCs increase163,164.”
From Hardware implementation of memristor-based artificial neural networks (2024) · cites this paper as [164]
In the citing paper
“not only the system becomes more sensitive and error-prone, but also its power consumption increases exponentially as the resolution of DACs and ADCs increase163,164.”
From Hardware implementation of memristor-based artificial neural networks (2024) · cites this paper as [164]
Citations
Cites
All-MOS charge-redistribution analog-to-digital conversion techniques. II
Suarez, R. E., Gray, P. R., & Hodges, D. A. (1975) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.1975.1050630 · Cited by 655
All-MOS charge redistribution analog-to-digital conversion techniques. I
McCreary, J. L., & Gray, P. R. (1975) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.1975.1050629 · Cited by 607 · cited 1×
“SARADCs have been known for decades [2], [3], but interest in such topologies only increased in recent years.”
BackgroundA low-noise self-calibrating dynamic comparator for high-speed ADCs
Miyahara, M., Asada, Y., Paik, D., & Matsuzawa, A. (2008) · 2008 IEEE Asian Solid-State Circuits Conference · doi:10.1109/asscc.2008.4708780 · Cited by 420 · cited 1×
“This is achieved by not sizing the capacitors in a binary way, as illustrated in Fig.”
MethodA 10b 100MS/s 1.13mW SAR ADC with binary-scaled error compensation
Liu, C.-C., Chang, S.-J., Huang, G.-Y., Lin, Y.-Z., Huang, C.-M., Huang, C.-H., Bu, L., & Tsai, C.-C. (2010) · 2010 IEEE International Solid-State Circuits Conference - (ISSCC) · doi:10.1109/isscc.2010.5433970 · Cited by 316
Noise Analysis of Regenerative Comparators for Reconfigurable ADC Architectures
Nuzzo, P., De Bernardinis, F., Terreni, P., & Van der Plas, G. (2008) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2008.917991 · Cited by 305 · cited 1×
“It is assumed that each constants ( ) for a settling error 0.5 LSB. unit capacitor has its own buffer and that therefore the driver strength is proportional to the switched capacitance.”
BackgroundInfluentialStepanovic, D., & Nikolic, B. (2013) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2013.2239005 · Cited by 192 · cited 1×
“In addition, multi-bit/cycle reduces the advantages of redundancy and asynchronous timing.”
BackgroundA 32 mW 1.25 GS/s 6b 2b/Step SAR ADC in 0.13$\ \mu$m CMOS
Cao, Z., Yan, S., & Li, Y. (2009) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2008.2012329 · Cited by 160
Jiang, T., Liu, W., Zhong, F. Y., Zhong, C., Hu, K., & Chiang, P. Y. (2012) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2012.2204543 · Cited by 134
A 1 GS/s 6 Bit 6.7 mW Successive Approximation ADC Using Asynchronous Processing
Yang, J., Naing, T. L., & Brodersen, R. W. (2010) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2010.2048139 · Cited by 119
Research works printed but not linked: 3
- maloberti, 2007, Data Converters
- murmann, 2013, ?ADC Performance Survey 1997?2013 ?
- 2012, All papers from IEEE Xplore with search term ?SAR ADC? and at least 6b resolution
Cited by
Items 301–346 of 346
Circuit Design for Memristor based In-Memory Computing
Singh, A. (2019)
Design Techniques for Ultra-High-Speed Time-Interleaved Analog-to-Digital Converters
Duan, Y. (2015) · eScholarship (California Digital Library)
A high speed fully self-timed SAR ADC with an on-chip adaptative reference buffer
Zhao, Y., Ye, M., Gao, M. K., & Zhao, Y. (2019) · IEEE International Conference on Electron Devices and Solid-State Circuits (EDSSC) · doi:10.1109/edssc.2019.8753967
“INTRODUCTION With advanced CMOS process and innovative circuit design techniques, SAR ADC has extended its application into high speed fields due to its low power and low area advantages[1][2][3].”
BackgroundZahrai, S. A. (2017) · Digital Repository Service (Northeastern University) · doi:10.17760/d20254741
Self-Calibrated Delay-Based LSB Extraction for Resolution Improvement in SAR ADCs
Akkaya, A., Çelik, F., & Leblebici, Y. (2019) · IEEE Nordic Circuits and Systems Conference (NorCAS) · doi:10.1109/norchip.2019.8906906
“Sampling rates of charge redistribution SAR ADCs have exceeded hundreds of MS/s for medium resolution with the help of scaled process nodes and the advanced circuit techniques such as asynchronous clocking and efficient switching schemes [1], [2].”
MethodSelf-citationA Double-Latch Comparator for Multi-GS/s SAR ADCs in 28nm CMOS
Ma, P., Chen, Y., & Wu, J. (2019) · IEEE International Conference on ASIC (ASICON) · doi:10.1109/asicon47005.2019.8983540
10-bit 47.57μW Power Efficient Successive Approximation Register ADC with High Speed
Devi, S., Meena, S., & Mishra, S. (2018) · IEEE International Conference on Recent Trends in Electronics, Information & Communication Technology · doi:10.1109/rteict42901.2018.9012648
An 8-bit 1.5GS/s Subranging ADC with Level-Shift Operation and Calibration Techniques
Yang, C.-M., & Kuo, T.-H. (2020) · International Symposium on Computer, Consumer and Control · doi:10.1109/is3c50286.2020.00067
Digitally Enhanced Information Efficient Wireline Signaling
Dey, S. (2020) · ERA: Education and Research Archive (University of Alberta) · doi:10.7939/r3-kh9n-dk50
Data Conversion Within Energy Constrained Environments
Kelly, B. M. (2017) · The Research Repository @ WVU (West Virginia University) · doi:10.33915/etd.5959
A 6b 800MS/s SAR ADC With Speed-Enhanced SAR Logic and Grouped DAC Capacitors
Zhang, Y., Zhao, Y., Lan, J., Ye, F., Xie, Y., & Ren, J. (2022) · IEEE International Conference on Solid-State and Integrated Circuit Technology · doi:10.1109/icsict55466.2022.9963312
“In the layout design process, SAR ADCs often use MIM capacitors or MOM capacitors in the standard cell library as unit capacitors.”
MethodResultInfluentialHigh-Speed Wide-Bandwidth Single-Channel SAR ADC
Ramkaj, A. T., Pelgrom, M. J. M., Steyaert, M. S. J., & Tavernier, F. (2022) · Analog circuits and signal processing/Analog circuits and signal processing series · doi:10.1007/978-3-031-22709-7_5
Architectural Considerations for High-Efficiency GHz-Range ADCs
Ramkaj, A. T., Pelgrom, M. J. M., Steyaert, M. S. J., & Tavernier, F. (2022) · Analog circuits and signal processing/Analog circuits and signal processing series · doi:10.1007/978-3-031-22709-7_3
Zhu, Y., Liu, T., Kaile, S. K., Kiran, S., Yi, I.-M., Liu, R., Diaz, J. C. G., Hoyos, S., & Palermo, S. M. (2023) · doi:10.36227/techrxiv.22179467
ADC Architectural Study for Digitally-Assisted Multi-Gigabit Data Communication Transceivers
Barba, P. L., Rodríguez‐Pérez, A., Prefasi, E., Río, R. D., & Guerra, O. (2023) · Conference on Design of Circuits and Integrated Systems · doi:10.1109/dcis58620.2023.10335974
“This technique allows to combine some slower ADCs and overcome the speed limitation of a single-channel ADC [2].”
BackgroundMethodA High-efficiency Incremental Zoom SAR ΣΔ Capacitance-to-Digital Converter
Dong, K., Fan, H., Zhou, W., & Luo, J. (2023) · IEEE International Conference on Electronics, Circuits and Systems (ICECS) · doi:10.1109/icecs58634.2023.10382740
“Zoom-in Sigma Delta structure enables high accuracy with a two-step measurement [6]- [9].”
MethodKye, C., Byeon, Y.-J., Choo, K. D., & Choo, M.-S. (2024) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2024.3418784 · Cited by 3
“In the conventional CDAC-based SAR ADC design, the DAC is the building block with the significant power and area needed [11], [24].”
BackgroundMethodA Single-Channel 2-GS/s 8-bit Two-Step SAR ADC in 28nm CMOS
Tang, J.-Y., Liu, J., Fu, X., Li, T., Gui, J., Han, W., & Zhao, S. (2024) · International Conference on Integrated Circuits and Microsystems (ICICM) · doi:10.1109/icicm63644.2024.10814399
“In addition, alternate comparators were used to effectively reduce comparators’ reset time and enhance ADC speed [5] [6].”
GLoRia: An Energy-Efficient GPU-RRAM System Stack for Large Neural Networks
de Moura, R. F., Jordan, M. G., & Carro, L. (2025) · Lecture notes in computer science · doi:10.1007/978-3-031-78377-7_15
A 6‐b 875‐MS/s SAR ADC with charge‐pump based pipelined background metastability calibration
Park, Y. H., Park, S., & Chun, J. (2025) · Electronics Letters · doi:10.1049/ell2.70148
In-Memory Computing Accelerator for Iterative Linear Algebra Solvers
Liu, R., Li, Z., Zhang, X., Chen, X., Han, Y., & Tang, M. (2025) · IEEE Computer Architecture Letters · doi:10.1109/lca.2025.3563365 · Cited by 1
“ADC and DAC parameters [12], [13].”
Sadeghi, R., & Navabi, Z. (2025) · IEEE Access · doi:10.1109/access.2025.3585746
A 7‐Bit 700 MS/s 2b/Cycle Asynchronous SAR ADC With Partially Merged Capacitor Switching
Kim, H., Lee, J. S., Lim, J., Park, S., Park, S., Kwak, M., Park, J., Choi, Y., Boo, J., & Ahn, G. (2025) · Electronics Letters · doi:10.1049/ell2.70395
CIM-BLAS: Computing-in-Memory Accelerator for BLAS
Liu, R., Li, Z., Zhang, X., Chen, X., Han, Y., & Tang, M. (2025) · ACM/IEEE Design Automation Conference (DAC) · doi:10.1109/dac63849.2025.11133288 · Cited by 1
“For the ADCs and DACs used in the accelerator, we obtain their parameters from existing designs/products [31], [32].”
Cui, J., Gao, J., Xu, X., He, Y., & Shen, L. (2025) · IEEE Transactions on Circuits and Systems I Regular Papers · doi:10.1109/tcsi.2025.3627001
“This power consumption can be reduced by optimizing the SAR logic [34] and adopting true single-phase clock (TSPC) logic [35], [36].”
FATE: A Fourier Accelerated Tensor Engine for Neural Networks
Adiletta, J., Islam, B., & Güler, Ü. (2025) · IEEE International Midwest Symposium on Circuits and Systems (MWSCAS) · doi:10.1109/mwscas53549.2025.11244307 · Cited by 1
“Because ML models can operate at 8-bit and lower precision [8], [9]; the costs of analog to digital conversion with high speed, 8-bit ADCs become reasonable [7], [20]–[22].”
Ren, Y., Yang, S., Xiong, Z.-H., Zhang, Y.-X., Bi, J.-H., & Chen, S. (2025) · Globecom · doi:10.1109/globecom59602.2025.11432617
“A single OA designed in [20] consumes about 0.516 mW of power, and the power consumption of a single ADC is about 52.224 mW [28].”
InfluentialZhang, C., Liu, M., Chang, Y., Yang, Y., Xiao, J., Yang, Y., & Chen, Y. (2026) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2026.3671459
“Alternating comparators and loop-unrolled structures are used to speed up the SAR conversion [15], [16], [17], but the calibration of comparator o ff set complexity rises at the same time.”
A New ADC topology for reliable conversion in the automotive environment
Cron, L. (2018) · theses.fr (ABES) · doi:10.70675/f704da00z0a2az4f9bz8642zfb137ed46bec
A Single-Channel 8-bit 2-GS/s Asynchronous SAR ADC With Alternate-Comparator in 12-nm FinFET
Wang, N., Zhang, Z., & Zhu, C. (2026) · International Conference on Neural Networks, Information and Communication Engineering (NNICE) · doi:10.1109/nnice68970.2026.11465696
“In [11], a scheme using two alternate comparators was proposed to move the reset time out of the per-bit decision time, achieving a favorable trade-off among speed, area, and power, and making it particularly suitable for ultra-high-speed TI ADCs.”
A pipelined-SAR ADC with loop-unrolled first stage and improved top-plate switches
Guan, K., Zheng, Y., Yang, C., Shen, Y., & Hu, S. (2026) · AEU - International Journal of Electronics and Communications · doi:10.1016/j.aeue.2026.156397
Lei, T., Zhou, H., Wu, B., Tong, W., & Feng, D. (2026) · Design, Automation, and Test in Europe · doi:10.23919/date69613.2026.11539353
“The parameters of ADC are obtained from [3].”
Qing, S., Ren, W., Xu, J. Q., Guo, X. S., Jia, H., Zheng, X. B., Wu, L., Sun, K., Sun, N., & Liu, X. Y. (2026) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas66217.2026.11562505
“Conventional speed-enhancement techniques of SAR ADCs, typically include alternating comparators [3], loop-unrolled structures [4], and multi-bit/cycle logic [5].”
Tao, Y., He, X., He, Y., Bai, J., Zhu, X., Guo, A., Luo, H., Kong, L., Wang, S., Zhong, Y., et al. (2026) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas66217.2026.11562772
“In addition, an adaptive-average residue estimator is proposed for the LSB repeating process, providing”
Zhang, S. J., Yuan, C., Wang, Q., Wang, W. M., Li, Y., Ye, M., & Chen, Y. (2026) · IEEE International Symposium on Circuits and Systems proceedings · doi:10.1109/iscas66217.2026.11562697
“2: the capacitor for each bit (before the doubling step in [11]) is split, with the only exception being the capacitor corresponding to the least significant bit (LSB).”
InfluentialA 6-B 2-GS/s Speculative Loop-Unrolled SAR ADC with Calibratable Multi-Input Comparator
Shen, C., & Li, Y. (2026) · International Conference on Electronics, Circuits and Information Engineering (ECIE) · doi:10.1109/ecie69549.2026.11565570
Kim, C., Park, S., Shim, M., Lee, W. S., Kim, H., Seo, D., Lee, J., & Kim, C. (2026) · IEEE Symposium on VLSI Technology and Circuits (VLSI Technology and Circuits) · doi:10.1109/vlsitechnologyandcir65830.2026.11577610
Zhou, H., Wu, B., Liu, J., Cheng, H., Lei, T., Li, Z., Feng, D., Tong, W., & Wei, X. (2026) · Journal of Systems Architecture · doi:10.1016/j.sysarc.2026.103927
Wang, P., Wang, Y., Li, F., & Wang, Z. (2026) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2026.3713446
“The third stage also employs background o ff set calibration following [33].”
Low-power Multi-Cauda Comparator Designed Using a Fragmentary Pre-charging Approach
Begum, F., Dutta, L., Islam, M. N., Mishra, S., Dandapat, A., & Sarma, K. K. (2026) · IETE Journal of Research · doi:10.1080/03772063.2026.2708147
Li, G., Ding, H., Liu, J., Hong, J., & Liu, C. (2026) · International Conference on Microwave and Millimeter Wave Technology (ICMMT) · doi:10.1109/icmmt69626.2026.11678283
“To achieve a 500-MS/s sampling rate in a standard 55-nm CMOS process, an alternate-comparator architecture is adopted [1].”
Park, J., Chou, T.-H., & Johnston, M. L. (2026) · IEEE International Midwest Symposium on Circuits and Systems (MWSCAS) · doi:10.1109/mwscas67364.2026.11680679
“The SAR logic and the comparator are enabled and reset asynchronously, like that in [3].”
Qin, C., Liu, B., Wang, R., Li, L., & Zhang, C. (2026) · Micromachines · doi:10.3390/mi17101110
“…same device-speed advantage has also enabled conventional architectures, such as single-channel SAR converters, to reach the gigahertz-rate regime [6], TD-ADCs and VCO-based modulators inherently bypass the voltage-headroom bottleneck by performing quantization directly in the time or phase…”
InfluentialREUSE: Recurrent Subgraph Exploitation for ReRAM-Accelerated Graph Processing
Rahimi, M., & Beux, S. L. (2026) · ACM Transactions on Design Automation of Electronic Systems · doi:10.1145/3858342
“The main memory subsystem is represented by an HBM2 stack comprising eight channels, with a total capacity of 8 GB and an aggregate bandwidth of 256 GB/s. ADC parameters are derived from [22], assuming a 32 nm technology node with 8-bit resolution.”
Metadata
- Authors
- Kull, L., Toifl, T., Schmatz, M., Francese, P. A., Menolfi, C., Brandli, M., Kossel, M., Morf, T., Andersen, T. M., & Leblebici, Y.
- Affiliations
- École Polytechnique Fédérale de Lausanne (CH)
- IBM Research - Zurich (CH)
- Venue
- IEEE Journal of Solid-State Circuits
- Published
- 2013-12
- Volume
- 48
- Issue
- 12
- Pages
- 3049-3058
- ISSN
- 0018-9200 (ISSN-L)
- 1558-173X
- OpenAlex
- W2155589054
- Cited by
- 347
- References
- 24
- Citations by year
- 2026: 21 · 2025: 28 · 2024: 22 · 2023: 27 · 2022: 23 · 2021: 21 · 2020: 29 · 2019: 33 · 2018: 34 · 2017: 36 · 2016: 31 · 2015: 19 · 2014: 17 · 2013: 6
- FWCI
- 13.43
- Type
- journal article
- Language
- en
- Open access
- green
- infoscience.epfl.ch
- Locations
- IEEE Journal of Solid-State Circuits (publishedVersion)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion, cc-by-nc-nd)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Analog and Mixed-Signal Circuit Design
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Radio Frequency Integrated Circuit Design
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Low-power high-performance VLSI design
- Keywords
- successive approximation register ADC, high-speed ADC, capacitive DAC, reference buffer, comparator offset calibration, low-power analog-to-digital converter, 32nm CMOS
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.