Bi-directional DC to DC converters for fuel cell systems
The DOI matches its Crossref record.
Abstract
This paper first describes the need of a bi-directional DC to DC converter for a fuel cell system. Various combinations of current-fed and voltage-fed converters are explored for the application of different voltage levels. With a preliminary study, putting current-fed on low-voltage side and voltage fed on high voltage side indicated higher efficiency than the other way around. Two low-side circuit topologies were then selected for hardware implementation. One is the L-type half-bridge current-fed converter, and the other is full-bridge current-fed converter. The high-side circuit topology is fixed with a full-bridge voltage-fed converter. Two systems were built and tested to full power. The results indicate that the combination with the full-bridge converter on the low-voltage side is more efficient than the combination with the L-type half-bridge converter on the low-voltage side for both charging and discharging modes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Zhao, B., Song, Q., Liu, W., & Sun, Y. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2289913 · Cited by 1,886
A new ZVS bidirectional DC-DC converter for fuel cell and battery application
Peng, F. Z., Li, H., Su, G.-J., & Lawler, J. S. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.820550 · Cited by 782
Industrial Electronics for Electric Transportation: Current State-of-the-Art and Future Challenges
Williamson, S. S., Rathore, A. K., & Musavi, F. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2409052 · Cited by 527
Family of multiport bidirectional DC–DC converters
Tao, H., Kotsopoulos, A., Duarte, J. L., & Hendrix, M. A. M. (2006) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20050362 · Cited by 488
Three-Port Bidirectional Converter for Hybrid Fuel Cell Systems
Duarte, J. L., Hendrix, M., & Simoes, M. G. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.889928 · Cited by 441
Operation, design and control of dual H-bridge-based isolated bidirectional DC–DC converter
Mi, C., Bai, H., Wang, C., & Gargies, S. (2008) · IET Power Electronics · doi:10.1049/iet-pel:20080004 · Cited by 405
Zhu, L. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.869730 · Cited by 381
Self-citationA bidirectional DC–DC converter for fuel cell electric vehicle driving system
Chiu, H.-J., & Lin, L.-W. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.876863 · Cited by 327
Energy Management Power Converters in Hybrid Electric and Fuel Cell Vehicles
Lai, J.-S., & Nelson, D. J. (2007) · Proceedings of the IEEE · doi:10.1109/jproc.2006.890122 · Cited by 318
“Fig. 10 indicated that inductor size still dominates the entire converter, and the efficiency was not satisfactory [ 20 ], [21].”
BackgroundMethodInfluentialSelf-citationHigh-Efficiency Isolated Boost DC–DC Converter for High-Power Low-Voltage Fuel-Cell Applications
Nymand, M., & Andersen, M. A. E. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2036024 · Cited by 312
A natural ZVS medium-power bidirectional DC-DC converter with minimum number of devices
Li, H., Peng, F. Z., & Lawler, J. S. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.808965 · Cited by 296
A PWM Plus Phase-Shift Control Bidirectional DC–DC Converter
Xu, D., Zhao, C., & Fan, H. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2004.826485 · Cited by 284
Zhou, H., & Khambadkone, A. M. (2009) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2009.2023493 · Cited by 283
A Bidirectional LLC Resonant Converter With Automatic Forward and Backward Mode Transition
Jiang, T., Zhang, J., Wu, X., Sheng, K., & Wang, Y. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2307329 · Cited by 264
New DC–DC converter for energy storage system interfacing in fuel cell hybrid electric vehicles
Marchesoni, M., & Vacca, C. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.886650 · Cited by 263
Harfman Todorovic, M., Palma, L., & Enjeti, P. N. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.911200 · Cited by 263
Three-level bidirectional converter for fuel-cell/battery hybrid power system
Jin, K., Yang, M., Ruan, X., & Xu, M. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2031197 · Cited by 245
Review of high power isolated bi-directional DC-DC converters for PHEV/EV DC charging infrastructure
Du, Y., Lukic, S., Jacobson, B., & Huang, A. (2011) · 2011 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2011.6063818 · Cited by 218
Isolated Zeta-SEPIC bidirectional dc-dc converter with active-clamping
Ruseler, A., & Barbi, I. (2013) · 2013 Brazilian Power Electronics Conference · doi:10.1109/cobep.2013.6785104 · Cited by 19
Metadata
- Authors
- Wang, K., Lin, C. Y., Zhu, L., Qu, D., Lee, F. C., & Lai, J. S.
- Venue
- Power Electronics in Transportation (Cat. No.98TH8349)
- Publisher
- IEEE
- Published
- 2002-11-27
- Pages
- 47-51
- OpenAlex
- W2098556032
- Cited by
- 208
- References
- 0
- FWCI
- 11.04
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.