The DOI matches its Crossref record; 48 of the 48 references it cites were found in a registry or an index.
A survey of energy harvesting sources for embedded systems
Abstract
Historically, batteries have been the source of energy for most mobile, embedded and remote system applications. Now, with ubiquitous computing requirements in the fields of embedded systems, wireless sensor networks and low-power electronics such as MEMS devices, an alternative source of energy is required. Also with the limited capacity of finite power sources and the need for supplying energy for a lifetime of a system, there is a requirement for self-powered devices. The process of extracting energy from the surrounding environment is termed as energy harvesting. Energy harvesting, which originated from the windmill and water wheel, is widely being considered as a low-maintenance solution for a wide variety of applications. There are various forms of energy that can be scavenged, like thermal, mechanical, solar, acoustic, wind, and wave. This paper serves as a survey for identifying the sources of energy harvesting based on various technical papers available in the public domain.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Energy harvesting vibration sources for microsystems applications
Beeby, S. P., Tudor, M. J., & White, N. M. (2006) · Measurement Science and Technology · doi:10.1088/0957-0233/17/12/r01 · Cited by 3,008
Energy Scavenging for Mobile and Wireless Electronics
Paradiso, J. A., & Starner, T. (2005) · IEEE Pervasive Computing · doi:10.1109/mprv.2005.9 · Cited by 2,653
Analysis of a micro-electric generator for microsystems
Williams, C. B., & Yates, R. B. (1996) · Sensors and Actuators A: Physical · doi:10.1016/0924-4247(96)80118-x · Cited by 1,407
A Review of Power Harvesting from Vibration Using Piezoelectric Materials
Sodano, H. A., Inman, D. J., & Park, G. (2004) · The Shock and Vibration Digest · doi:10.1177/0583102404043275 · Cited by 1,361
Adaptive piezoelectric energy harvesting circuit for wireless remote power supply
Ottman, G. K., Hofmann, H. F., Bhatt, A. C., & Lesieutre, G. A. (2002) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2002.802194 · Cited by 1,206
Composing domain-specific design environments
Ledeczi, A., Bakay, A., Maroti, M., Volgyesi, P., Nordstrom, G., Sprinkle, J., & Karsai, G. (2001) · Computer · doi:10.1109/2.963443 · Cited by 1,130
Adaptive piezoelectric energy harvesting circuit for wireless, remote power supply
Ottman, G., Bhatt, A., Hofmann, H., & Lesieutre, G. (2001) · 19th AIAA Applied Aerodynamics Conference · doi:10.2514/6.2001-1505 · Cited by 953
Vibration-to-electric energy conversion
Meninger, S., Mur-Miranda, J. O., Amirtharajah, R., Chandrakasan, A., & Lang, J. H. (2001) · IEEE Transactions on Very Large Scale Integration (VLSI) Systems · doi:10.1109/92.920820 · Cited by 867
Design considerations for solar energy harvesting wireless embedded systems
Raghunathan, V., Kansal, A., Hsu, J., Friedman, J., & Srivastava, M. (2005) · IPSN 2005. Fourth International Symposium on Information Processing in Sensor Networks, 2005. · doi:10.1109/ipsn.2005.1440973 · Cited by 791
Architectures for Vibration-Driven Micropower Generators
Mitcheson, P. D., Green, T. C., Yeatman, E. M., & Holmes, A. S. (2004) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2004.830151 · Cited by 753
Comparison of Piezoelectric Energy Harvesting Devices for Recharging Batteries
Sodano, H. A., Inman, D. J., & Park, G. (2005) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x05056681 · Cited by 663
Self-powered signal processing using vibration-based power generation
Amirtharajah, R., & Chandrakasan, A. P. (1998) · IEEE Journal of Solid-State Circuits · doi:10.1109/4.668982 · Cited by 621
Parasitic power harvesting in shoes
Kymissis, J., Kendall, C., Paradiso, J., & Gershenfeld, N. (2002) · Digest of Papers. Second International Symposium on Wearable Computers (Cat. No.98EX215) · doi:10.1109/iswc.1998.729539 · Cited by 621
Design Considerations for Solar Energy Harvesting Wireless Embedded Systems
Raghunathan, V., Kansal, A., Hsu, J. C., Friedman, J., & Srivastava, M. B. (2005) · eScholarship (California Digital Library) · Cited by 581
Development of an electromagnetic micro-generator
Williams, C. B., Shearwood, C., Harradine, M. A., Mellor, P. H., Birch, T. S., & Yates, R. B. (2001) · IEE Proceedings - Circuits, Devices and Systems · doi:10.1049/ip-cds:20010525 · Cited by 507
Design and fabrication of a new vibration-based electromechanical power generator
El-hami, M., Glynne-Jones, P., White, N. M., Hill, M., Beeby, S., James, E., Brown, A. D., & Ross, J. N. (2001) · Sensors and Actuators A: Physical · doi:10.1016/s0924-4247(01)00569-6 · Cited by 476
Energy Scavenging for Wireless Sensor Nodes with a Focus on Vibration-to-Electricity Conversion
Roundy, S. (2003) · Cited by 466
Energy Harvesting for Structural Health Monitoring Sensor Networks
Park, G., Rosing, T., Todd, M. D., Farrar, C. R., & Hodgkiss, W. (2008) · Journal of Infrastructure Systems · doi:10.1061/(asce)1076-0342(2008)14:1(64 · Cited by 434
Umeda, M., Nakamura, K., & Ueha, S. (1996) · Japanese Journal of Applied Physics · doi:10.1143/jjap.35.3267 · Cited by 367
Micro-Electrostatic Vibration-to-Electricity Converters
Roundy, S., Wright, P. K., & Pister, K. S. J. (2002) · Microelectromechanical Systems · doi:10.1115/imece2002-39309 · Cited by 303
Performance aware tasking for environmentally powered sensor networks
Kansal, A., Potter, D., & Srivastava, M. B. (2004) · Proceedings of the joint international conference on Measurement and modeling of computer systems · doi:10.1145/1005686.1005714 · Cited by 238
The Use of Piezoelectric Ceramics for Electric Power Generation Within Orthopedic Implants
Platt, S. R., Farritor, S., Garvin, K., & Haider, H. (2005) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2005.852482 · Cited by 232
A self-powered mechanical strain energy sensor
Elvin, N. G., Elvin, A. A., & Spector, M. (2001) · Smart Materials and Structures · doi:10.1088/0964-1726/10/2/314 · Cited by 223
A novel thick-film piezoelectric micro-generator
White, N. M., Glynne-Jones, P., & Beeby, S. P. (2001) · Smart Materials and Structures · doi:10.1088/0964-1726/10/4/403 · Cited by 192
Energy Storage Characteristics of a Piezo-Generator using Impact Induced Vibration
Umeda, M., Nakamura, K., & Ueha, S. (1997) · Japanese Journal of Applied Physics · doi:10.1143/jjap.36.3146 · Cited by 184
Analysis Of A Micro-electric Generator For Microsystems
Williams, C. B., & Yates, R. B. (2005) · Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95 · doi:10.1109/sensor.1995.717207 · Cited by 175
An Electromagnetic Micro Power Generator for Low-Frequency Environmental Vibrations
Kulah, H., & Najafi, K. (2005) · SAE Technical Paper Series · doi:10.4271/2005-01-1896 · Cited by 171
TASHIRO, R., Kabei, N., Katayama, K., Tsuboi, E., & TSUCHIYA, K. (2002) · Journal of Artificial Organs · doi:10.1007/s100470200045 · Cited by 170
Bayrashev, A., Robbins, W. P., & Ziaie, B. (2004) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2004.01.007 · Cited by 168
Investigation of a resonance microgenerator
Mizuno, M., & Chetwynd, D. G. (2003) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/13/2/307 · Cited by 161
Design and optimization of a MEMS electret-based capacitive energy scavenger
Peano, F., & Tambosso, T. (2005) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2005.844803 · Cited by 161
Enhancing Power Harvesting using a Tuned Auxiliary Structure
Cornwell, P. J., Goethal, J., Kowko, J., & Damianakis, M. A. (2005) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x05055279 · Cited by 133
Micro Seismic Power Generator Using Electret Polymer Film
ARAKAWA, Y., Suzuki, Y., & Kasagi, N. (2004) · Doryoku, Enerugi Gijutsu Shinpojiumu koen ronbunshu/Doryoku, enerugi gijutsu no saizensen koen ronbunshu · doi:10.1299/jsmepes.2004.9.37 · Cited by 104
Self‐powered systems: a review of energy sources
Glynne‐Jones, P., & White, N. M. (2001) · Sensor Review · doi:10.1108/02602280110388252 · Cited by 97
TASHIRO, R., Kabei, N., Katayama, K., ISHIZUKA, Y., TSUBOI, F., & TSUCHIYA, K. (2000) · JSME International Journal Series C · doi:10.1299/jsmec.43.916 · Cited by 82
MIYAZAKI, M., Tanaka, H., Ono, G., Nagano, T., Ohkubo, N., Kawahara, T., & Yano, K. (2003) · International Symposium on Low Power Electronics and Design (ISLPED) · doi:10.1145/871506.871555 · Cited by 71
Energy harvesting by magnetostrictive material (MsM) for powering wireless sensors in SHM
Wang, L., & Yuan, F. (2007) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.716506 · Cited by 68
Basrour, S., Chaillout, J. J., Charlot, B., Despesse, G., Jäger, T., Leger, J. M., & Vassilev, A. (2005) · HAL · Cited by 67
Systems for human-powered mobile computing
Paradiso, J. A. (2006) · ACM/IEEE Design Automation Conference (DAC) · doi:10.1145/1146909.1147074 · Cited by 56
Energy harvesting using vibrating structures excited by shock
Cavallier, B., Berthelot, P., Nouira, H., et al. (2006) · Proceedings/Proceedings - IEEE Ultrasonics Symposium · doi:10.1109/ultsym.2005.1603006 · Cited by 49
Power Extraction from Ambient Vibration
Sterken, T., Baert, K., Puers, R., & Borghs, G. (2001) · Ghent University Academic Bibliography (Ghent University) · Cited by 47
Micromachined silicon Generator for Harvesting Power from Vibrations
Beeby, S., Tudor, J., Koukharenko, E., White, N. M., O’Donnell, T., Saha, C., Kulkarni, S., & Roy, S. (2004) · ePrints Soton (University of Southampton) · Cited by 41
A low power controller for a MEMS based energy converter
Meninger, S. (1999) · Cited by 31
Novel design and fabrication of a MEMS electrostatic vibration scavenger
Sterken, T., Fiorini, P., Baert, K., Borghs, G., & Puers, R. (2004) · Ghent University Academic Bibliography (Ghent University) · Cited by 29
Miyazaki, M., Tanaka, H., Ono, G., Nagano, T., Ohkubo, N., Kawahara, T., & Yano, K. (2003) · International Symposium on Low Power Electronics and Design (ISLPED) · doi:10.1109/lpe.2003.1231861 · Cited by 29
Compact portable electric power sources
Lab., T. (. S. O. R. N., Fry, D. N., USDOE, W., Holcomb, D., Munro, J., Oakes, L., & Matson, M. (1997) · doi:10.2172/663584 · Cited by 23
A vibration-powered generator for wireless microsystems
Glynne‐Jones, P., El-hami, M., Beeby, S., James, E. P., Brown, A. D., Hill, M., & White, N. M. (2000) · ePrints Soton (University of Southampton) · Cited by 13
Systems for human-powered mobile computing
Paradiso, J. A. (2006) · ACM/IEEE Design Automation Conference (DAC) · doi:10.1109/dac.2006.229275 · Cited by 9
Cited by
Energy Harvesting Sensor Nodes: Survey and Implications
Sudevalayam, S., & Kulkarni, P. (2011) · IEEE Communications Surveys & Tutorials · doi:10.1109/surv.2011.060710.00094 · Cited by 1,981
Energy harvesting in wireless sensor networks: A comprehensive review
Shaikh, F. K., & Zeadally, S. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.11.010 · Cited by 1,253
Smart Textiles for Electricity Generation
Chen, G., Li, Y., Bick, M., & Chen, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00821 · Cited by 931
Large-scale vibration energy harvesting
Zuo, L., & Tang, X. (2013) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x13486707 · Cited by 285
A Learning Theoretic Approach to Energy Harvesting Communication System Optimization
Blasco, P., Gunduz, D., & Dohler, M. (2013) · IEEE Transactions on Wireless Communications · doi:10.1109/twc.2013.030413.121120 · Cited by 276
Metadata
- Authors
- Chalasani, S., & Conrad, J. M.
- Venue
- IEEE SoutheastCon 2008
- Publisher
- IEEE
- Published
- 2008-04
- Pages
- 442-447
- ISSN
- 1091-0050 (ISSN-L)
- OpenAlex
- W2119652571
- Cited by
- 482
- References
- 48
- FWCI
- 44.25
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.