Low-Temperature Sintering of Nanoscale Silver Paste for Attaching Large-Area $({>}100~{\rm mm}^{2})$ Chips
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
A low-temperature sintering technique enabled by a nanoscale silver paste has been developed for attaching large-area (>100 mm2) semiconductor chips. This development addresses the need of power device or module manufacturers who face the challenge of replacing lead-based or lead-free solders for high-temperature applications. The solder-reflow technique for attaching large chips in power electronics poses serious concern on reliability at higher junction temperatures above 125°C. Unlike the soldering process that relies on melting and solidification of solder alloys, the low-temperature sintering technique forms the joints by solid-state atomic diffusion at processing temperatures below 275°C with the sintered joints having the melting temperature of silver at 961°C. Recently, we showed that a nanoscale silver paste could be used to bond small chips at temperatures similar to soldering temperatures without any externally applied pressure. In this paper, we extend the use of the nanomaterial to attach large chips by introducing a low pressure up to 5 MPa during the densification stage. Attachment of large chips to substrates with silver, gold, and copper metallization is demonstrated. Analyses of the sintered joints by scanning acoustic imaging and electron microscopy showed that the attachment layer had a uniform microstructure with micrometer-sized porosity with the potential for high reliability under high-temperature applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High-Temperature Operation of SiC Power Devices by Low-Temperature Sintered Silver Die-Attachment
Bai, J. G., Yin, J., Zhang, Z., Lu, G.-Q., & van Wyk, J. D. (2007) · IEEE Transactions on Advanced Packaging · doi:10.1109/tadvp.2007.898628 · Cited by 177
Self-citation
Cited by
Mechanical properties of nano-silver joints as die attach materials
Siow, K. S. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2011.10.092 · Cited by 390
Joining of Silver Nanomaterials at Low Temperatures: Processes, Properties, and Applications
Peng, P., Hu, A., Gerlich, A. P., Zou, G., Liu, L., & Zhou, Y. N. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b02134 · Cited by 364
Review of Die-Attach Materials for SiC High-Temperature Packaging
Hou, F., Sun, Z., Su, M., Fan, J., You, X., Li, J., Wang, Q., Cao, L., & Zhang, G. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3417529 · Cited by 52
“Typically, a decrease in one or two parameters (e.g., temperature) requires an increase in the others (e.g., pressure) to compensate for achieving similar joint strength [40], [66], [67], [68].”
BackgroundZhu, G., Zhang, L., Hou, Z., Wang, Y., Liang, L., & Mei, Y. (2024) · 2024 25th International Conference on Electronic Packaging Technology (ICEPT) · doi:10.1109/icept63120.2024.10668703 · Cited by 3
Metadata
- Authors
- Lei, T. G., Calata, J. N., Lu, G.-Q., Chen, X., & Luo, S.
- Venue
- IEEE Transactions on Components and Packaging Technologies
- Published
- 2010-03
- Volume
- 33
- Issue
- 1
- Pages
- 98-104
- ISSN
- 1521-3331 (ISSN-L)
- 1557-9972
- OpenAlex
- W2155421397
- Cited by
- 241
- References
- 1
- FWCI
- 10.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.