The DOI matches its Crossref record; 35 of the 39 references it cites were found in a registry or an index.
RRAM Crossbar Array With Cell Selection Device: A Device and Circuit Interaction Study
Abstract
The resistive random access memory (RRAM) crossbar array has been extensively studied as one of the most promising candidates for future high-density nonvolatile memory technology. However, some problems caused by circuit and device interaction, such as sneak leakage paths, result in limited array size and large power consumption, which degrade the array performance significantly. Thus, the analysis on circuit and device interaction issue is imperative. In this paper, a simulation method is developed to investigate the critical issues correlated with the interaction between devices and the circuit. The simulations show that a large off/on ratio of resistance states of RRAM is beneficial for large readout margin (i.e., array size). The existence of the selector connected in series with an RRAM device can eliminate the need for highRonresistance, which is critical for the array consisted of only RRAM cells. The readout margin is more sensitive to the variation ofRonand is determined by the nonlinearity of theI-Vcharacteristics of RRAM, whereas the nonlinear characteristics of the selector device are beneficial for a larger readout margin. An optimal design scheme for turn-on voltage and conductance of the selector is proposed based on the simulation.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Nanoionics-based resistive switching memories
Waser, R., & Aono, M. (2007) · Nature Materials · doi:10.1038/nmat2023 · Cited by 4,923
Wong, H.-S. P., Lee, H.-Y., Yu, S., Chen, Y.-S., Wu, Y., Chen, P.-S., Lee, B., Chen, F. T., & Tsai, M.-J. (2012) · Proceedings of the IEEE · doi:10.1109/jproc.2012.2190369 · Cited by 2,757
Wong, H.-S. P., Raoux, S., Kim, S., Liang, J., Reifenberg, J. P., Rajendran, B., Asheghi, M., & Goodson, K. E. (2010) · Proceedings of the IEEE · doi:10.1109/jproc.2010.2070050 · Cited by 1,806
Complementary resistive switches for passive nanocrossbar memories
Linn, E., Rosezin, R., Kügeler, C., & Waser, R. (2010) · Nature Materials · doi:10.1038/nmat2748 · Cited by 1,274
Åkerman, J. (2005) · Science · doi:10.1126/science.1110549 · Cited by 522
Two Series Oxide Resistors Applicable to High Speed and High Density Nonvolatile Memory
Lee, M. ‐., Park, Y., Suh, D. ‐., Lee, E. ‐., Seo, S., Kim, D. ‐., Jung, R., Kang, B. ‐., Ahn, S. ‐., Lee, C. B., et al. (2007) · Advanced Materials · doi:10.1002/adma.200700251 · Cited by 435
Guan, X., Yu, S., & Wong, H.-S. P. (2012) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2012.2184545 · Cited by 355
A stackable cross point Phase Change Memory
Kau, D., Tang, S., Karpov, I. V., Dodge, R., Klehn, B., Kalb, J. A., Strand, J., Diaz, A., Leung, N., Wu, J., et al. (2009) · 2009 IEEE International Electron Devices Meeting (IEDM) · doi:10.1109/iedm.2009.5424263 · Cited by 291
Liang, J., & Wong, H.-S. P. (2010) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2010.2062187 · Cited by 276
Writing to and reading from a nano-scale crossbar memory based on memristors
Vontobel, P. O., Robinett, W., Kuekes, P. J., Stewart, D. R., Straznicky, J., & Stanley Williams, R. (2009) · Nanotechnology · doi:10.1088/0957-4484/20/42/425204 · Cited by 262
Research works printed but not linked: 2
- 2011, ITRS International Technology Roadmap for Semiconductors
- tran, 2011, High performance unipolar <ref_formula><tex Notation="TeX">$\hbox{AlO}_{y}/\hbox{HfO}_{x}/\hbox{Ni}$</tex> </ref_formula> based RRAM compatible with Si diodes for 3D application, Proc VLSI Symp Technol, 44
Cited by
Emerging Memory Technologies: Recent Trends and Prospects
Yu, S., & Chen, P.-Y. (2016) · IEEE Solid-State Circuits Magazine · doi:10.1109/mssc.2016.2546199 · Cited by 555
Resistive switching phenomena: A review of statistical physics approaches
Lee, J. S., Lee, S., & Noh, T. W. (2015) · Applied Physics Reviews · doi:10.1063/1.4929512 · Cited by 463
Crossbar RRAM Arrays: Selector Device Requirements During Read Operation
Zhou, J., Kim, K.-H., & Lu, W. (2014) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2014.2310200 · Cited by 310
Crossbar RRAM Arrays: Selector Device Requirements During Write Operation
Kim, S., Zhou, J., & Lu, W. D. (2014) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2014.2327514 · Cited by 219
Research Progress on Memristor: From Synapses to Computing Systems
Yang, X., Taylor, B., Wu, A., Chen, Y., & Chua, L. O. (2022) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2022.3159153 · Cited by 200
Self-citation
Metadata
- Authors
- Deng, Y., Huang, P., Chen, B., Yang, X., Gao, B., Wang, J., Zeng, L., Du, G., Kang, J., & Liu, X.
- Affiliations
- Peking University (CN)
- Venue
- IEEE Transactions on Electron Devices
- Published
- 2013-02
- Volume
- 60
- Issue
- 2
- Pages
- 719-726
- ISSN
- 0018-9383 (ISSN-L)
- 1557-9646
- OpenAlex
- W2133557550
- Cited by
- 184
- References
- 39
- Citations by year
- 2026: 4 · 2025: 12 · 2024: 10 · 2023: 9 · 2022: 11 · 2021: 17 · 2020: 18 · 2019: 19 · 2018: 13 · 2017: 19 · 2016: 21 · 2015: 19 · 2014: 12
- FWCI
- 6.34
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Electron Devices (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Memory and Neural Computing
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Ferroelectric and Negative Capacitance Devices
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Semiconductor materials and devices
- Keywords
- resistive random access memory, sneak paths, selector devices, RON, turn-on voltage, conductance, non-volatile memory, array size
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: RRAM Crossbar Array With Cell Selection Device: A Device and Circuit Interaction Study. https://app.cochat.ai/papers/10.1109/ted.2012.2231683
- The paper
- Deng, Y., Huang, P., Chen, B., Yang, X., Gao, B., Wang, J., Zeng, L., Du, G., Kang, J., & Liu, X. (2013). RRAM Crossbar Array With Cell Selection Device: A Device and Circuit Interaction Study. IEEE Transactions on Electron Devices. https://doi.org/10.1109/ted.2012.2231683
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.