Noise-Induced Resistance Broadening in Resistive Switching Memory—Part II: Array Statistics
Open accessThe DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Noise in resistive switching memory (RRAM) is among the main concerns due to its impact on the reliability of single-bit and multilevel cell devices. Although noise in typical RRAM cells is understood fairly well, the statistics of noise and the presence and impact of statistical tails in the current fluctuation is what mostly affects the RRAM reliability at the array level. This paper addresses current noise in RRAM arrays, focusing on high-resistance state distribution and its broadening with time. We highlight two main contributions to the tail behavior, namely, random walk (RW) and random telegraph noise (RTN) with random start and stop. We provide evidence for a time decay of RW amplitude with time, which we explain by time-dependent stabilization of defects. We finally develop a statistical Monte Carlo model for noise, which is capable of explaining the broadening of the resistance distribution based on a physical description of RW and RTN components.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lee, M.-J., Lee, C. B., Lee, D., Lee, S. R., Chang, M., Hur, J. H., Kim, Y.-B., Kim, C.-J., Seo, D. H., Seo, S., et al. (2011) · Nature Materials · doi:10.1038/nmat3070 · Cited by 2,228 · cited 1×
“RESISTIVE switching memory (RRAM) [2] and conductive-bridge RAM (CBRAM) [3]–[5] are attracting a wide interest due to their good performance in terms of low-power consumption [6], speed [7], [8], and endurance [9], [10].”
BackgroundElectrochemical metallization memories—fundamentals, applications, prospects
Valov, I., Waser, R., Jameson, J. R., & Kozicki, M. N. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/25/254003 · Cited by 921
High switching endurance in TaOx memristive devices
Yang, J. J., Zhang, M.-X., Strachan, J. P., Miao, F., Pickett, M. D., Kelley, R. D., Medeiros-Ribeiro, G., & Williams, R. S. (2010) · Applied Physics Letters · doi:10.1063/1.3524521 · Cited by 637
Pickett, M. D., & Stanley Williams, R. (2012) · Nanotechnology · doi:10.1088/0957-4484/23/21/215202 · Cited by 385
Cited by
Resistive switching memories based on metal oxides: mechanisms, reliability and scaling
Ielmini, D. (2016) · Semiconductor Science and Technology · doi:10.1088/0268-1242/31/6/063002 · Cited by 905
Self-citationIelmini, D. (2018) · Microelectronic Engineering · doi:10.1016/j.mee.2018.01.009 · Cited by 338
Self-citationIelmini, D., & Ambrogio, S. (2020) · Nanotechnology · doi:10.1088/1361-6528/ab554b · Cited by 321
Self-citationResistive memory device requirements for a neural algorithm accelerator
Agarwal, S., Plimpton, S. J., Hughart, D. R., Hsia, A. H., Richter, I., Cox, J. A., James, C. D., & Marinella, M. J. (2016) · 2016 International Joint Conference on Neural Networks (IJCNN) · doi:10.1109/ijcnn.2016.7727298 · Cited by 213
Physical Unbiased Generation of Random Numbers With Coupled Resistive Switching Devices
Balatti, S., Ambrogio, S., Carboni, R., Milo, V., Wang, Z., Calderoni, A., Ramaswamy, N., & Ielmini, D. (2016) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2016.2537792 · Cited by 127
“In addition, the RTN has been shown to be unstable in the RRAM, where the current fluctuation at a given bias can show unpredictable onset and interruption [5].”
BackgroundSelf-citation
Metadata
- Authors
- Ambrogio, S., Balatti, S., McCaffrey, V., Wang, D. C., & Ielmini, D.
- Venue
- IEEE Transactions on Electron Devices
- Published
- 2015-11
- Volume
- 62
- Issue
- 11
- Pages
- 3812-3819
- ISSN
- 0018-9383 (ISSN-L)
- 1557-9646
- OpenAlex
- W1942251340
- Cited by
- 75
- References
- 4
- FWCI
- 3.85
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.