The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Design considerations for fractional-slot winding configurations of synchronous machines
Abstract
This paper presents some design considerations for synchronous machines characterized by a fractional number of slots per pole per phase. The main advantage of this configuration is a smooth torque, which is due to the elimination of periodicity between slots and poles. A second advantage is a higher fault-tolerant capability, making the machine able to work even in faulty conditions. However, the fractional-slot configuration presents a high content of MMF harmonics that may cause an unbalanced saturation and thus an unbearable torque ripple. A method to design fractional-slot machines is illustrated in this paper, including double-layer and single-layer windings. The analytical computation is extended to determine the harmonics of MMF distribution. Their effect is highlighted in isotropic as well as anisotropic machines. Finally, some considerations are reported to avoid unsuitable configurations
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Welchko, B. A., Lipo, T. A., Jahns, T. M., & Schulz, S. E. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2004.830074 · Cited by 724
Five-Phase Permanent-Magnet Motor Drives
Parsa, L., & Toliyat, H. A. (2005) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2004.841021 · Cited by 462
Jack, A. G., Mecrow, B. C., & Haylock, J. A. (1996) · IEEE Transactions on Industry Applications · doi:10.1109/28.511646 · Cited by 368
Improved Reliability in Solid-State AC Drives by Means of Multiple Independent Phase Drive Units
Jahns, T. M. (1980) · IEEE Transactions on Industry Applications · doi:10.1109/tia.1980.4503793 · Cited by 358
Jack, A. G., Mecrow, B. C., & Haylock, J. (2002) · IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting · doi:10.1109/ias.1995.530372 · Cited by 306
Use of the star of slots in designing fractional-slot single-layer synchronous motors
Bianchi, N., & Dai Pré, M. (2006) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20050284 · Cited by 263
Self-citationTheory and design of small induction motors
(1960) · Journal of the Franklin Institute · doi:10.1016/0016-0032(60)90066-1 · Cited by 201
Cited by
EL-Refaie, A. M. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2030211 · Cited by 1,373
Strategies for the Fault-Tolerant Current Control of a Five-Phase Permanent-Magnet Motor
Bianchi, N., Bolognani, S., & Dai Pre, M. (2007) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2007.900445 · Cited by 276
Self-citationMetwly, M. Y., Abdel-Majeed, M. S., Abdel-Khalik, A. S., Hamdy, R. A., Hamad, M. S., & Ahmed, S. (2020) · IEEE Access · doi:10.1109/access.2020.2992741 · Cited by 229
Baudart, F., Dehez, B., Matagne, E., Telteu-Nedelcu, D., Alexandre, P., & Labrique, F. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2170393 · Cited by 98
Urresty, J.-C., Riba, J.-R., & Romeral, L. (2013) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2013.2247046 · Cited by 73
Metadata
- Authors
- Bianchi, N., Bolognani, S., Pre, M. D., & Grezzani, G.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 2006-07
- Volume
- 42
- Issue
- 4
- Pages
- 997-1006
- ISSN
- 0093-9994 (ISSN-L)
- OpenAlex
- W2141239060
- Cited by
- 447
- References
- 7
- FWCI
- 13.16
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Design considerations for fractional-slot winding configurations of synchronous machines. https://app.cochat.ai/papers/10.1109/tia.2006.876070
- The paper
- Bianchi, N., Bolognani, S., Pre, M. D., & Grezzani, G. (2006). Design considerations for fractional-slot winding configurations of synchronous machines. IEEE Transactions on Industry Applications. https://doi.org/10.1109/tia.2006.876070
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.