The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
A High-Efficiency Active Battery-Balancing Circuit Using Multiwinding Transformer
Abstract
This paper presents a simple circuit for balancing series-connected battery cells. The circuit is composed of one low-voltage metal–oxide–semiconductor field-effect transistor (MOSFET) for each cell and a symmetrical multiwinding transformer for a group of cells. Only one control signal is needed for all MOSFETs, and energy can be directly transferred from higher voltage cells to lower voltage cells. A small capacitor is added to form a resonant circuit with the transformer magnetizing inductance so that soft switching can be achieved in some operation range to obtain high efficiency. The circuit balance function and soft-switching condition are analyzed and verified by simulation and experiments. A circuit for balancing a 4- and 12-cell battery group is tested. The experimental results showed the effectiveness of the circuit. The energy transfer efficiency between cells can reach up to 93%. The circuit can be easily scaled to battery strings containing up to 12 battery cells, directly applicable to consumer electronics application where the number of cells is typically less than 12. A battery pack containing a large number of battery cells, such as the ones used in electric vehicles, can be balanced in groups, for example, in modules containing 12 cells each and with one additional circuit to balance among the modules.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Experimental Validation of a Battery Dynamic Model for EV Applications
Tremblay, O., & Dessaint, L.-A. (2009) · World Electric Vehicle Journal · doi:10.3390/wevj3020289 · Cited by 1,223
Energy Storage Systems for Automotive Applications
Lukic, S. M., Cao, J., Bansal, R. C., Rodriguez, F., & Emadi, A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.918390 · Cited by 1,025
Intelligent Control Battery Equalization for Series Connected Lithium-Ion Battery Strings
Lee, Y.-S., & Cheng, M.-W. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.855673 · Cited by 533
Double-Tiered Switched-Capacitor Battery Charge Equalization Technique
Baughman, A. C., & Ferdowsi, M. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.918401 · Cited by 519
Switched capacitor system for automatic series battery equalization
Pascual, C., & Krein, P. T. (2002) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.1997.575744 · Cited by 513
Quasi-Resonant Zero-Current-Switching Bidirectional Converter for Battery Equalization Applications
Lee, Y.-S., & Cheng, G.-T. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.880349 · Cited by 394
A Review of Cell Equalization Methods for Lithium Ion and Lithium Polymer Battery Systems
Moore, S. W., & Schneider, P. J. (2001) · SAE Technical Paper Series · doi:10.4271/2001-01-0959 · Cited by 392
Design considerations for charge equalization of an electric vehicle battery system
Kutkut, N. H., Wiegman, H. L. N., Divan, D. M., & Novotny, D. W. (1999) · IEEE Transactions on Industry Applications · doi:10.1109/28.740842 · Cited by 297
Design of a Charge Equalizer Based on Battery Modularization
Park, H.-S., Kim, C.-H., Park, K.-B., Moon, G.-W., & Lee, J.-H. (2009) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2009.2015331 · Cited by 228
Extension of battery life via charge equalization control
Hung, S. T., Hopkins, D. C., & Mosling, C. R. (1993) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.184826 · Cited by 226
Cassani, P. A., & Williamson, S. S. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2050750 · Cited by 222
Designing a new generalized battery management system
Chatzakis, J., Kalaitzakis, K., Voulgaris, N. C., & Manias, S. N. (2003) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.817706 · Cited by 216
Einhorn, M., Guertlschmid, W., Blochberger, T., Kumpusch, R., Permann, R., Conte, F. V., Kral, C., & Fleig, J. (2011) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2011.2168988 · Cited by 155
Cited by
Battery equalization active methods
Gallardo-Lozano, J., Romero-Cadaval, E., Milanes-Montero, M. I., & Guerrero-Martinez, M. A. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.026 · Cited by 542
Huang, W., & Abu Qahouq, J. A. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2363817 · Cited by 323
Naseri, F., Karimi, S., Farjah, E., & Schaltz, E. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111913 · Cited by 315
Shang, Y., Zhang, C., Cui, N., & Guerrero, J. M. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2345672 · Cited by 281
“1, these equalization methods can be classified into three main groups: the dissipative methods [8], [11]–[14], the nondissipative methods [15]–[41], and battery selection method [42], [43].”
BackgroundPropagation mechanisms and diagnosis of parameter inconsistency within Li-Ion battery packs
Feng, F., Hu, X., Hu, L., Hu, F., Li, Y., & Zhang, L. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.05.042 · Cited by 281
Metadata
- Authors
- Li, S., Mi, C. C., & Zhang, M.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 2013-01
- Volume
- 49
- Issue
- 1
- Pages
- 198-207
- ISSN
- 0093-9994 (ISSN-L)
- 1939-9367
- OpenAlex
- W2090774257
- Cited by
- 277
- References
- 13
- FWCI
- 6.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.