The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Speed-Sensorless Estimation for Induction Motors Using Extended Kalman Filters
Abstract
In this paper, extended-Kalman-filter-based estimation algorithms that could be used in combination with the speed-sensorless field-oriented control and direct-torque control of induction motors (IMs) are developed and implemented experimentally. The algorithms are designed aiming minimum estimation error in both transient and steady state over a wide velocity range, including very low and persistent zero-speed operation. A major challenge at very low and zero speed is the lost coupling effect from the rotor to the stator, which makes the information on rotor variables unobservable on the stator side. As a solution to this problem, in this paper, the load torque and the rotor angular velocity are simultaneously estimated, with the velocity taken into consideration via the equation of motion and not as a constant parameter, which is commonly the case in most past studies. The estimation of load torque, on the other hand, is performed as a constant parameter to account for Coulomb and viscous friction at steady state to improve the estimation performance at very low and zero speed. The estimation algorithms developed based on the rotor and stator fluxes are experimentally tested under challenging variations and reversals of the velocity and load torque (step-type and varying linearly with velocity) over a wide velocity range and at zero speed. In all the scenarios, the current estimation error has remained within a very narrow error band, also yielding acceptable velocity estimation errors, which motivate the use of the developed estimation method in sensorless control of IMs over a wide velocity range and persistent zero-speed operation
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adaptive filtering, prediction and control
Ioannou, P. (1985) · Automatica · doi:10.1016/0005-1098(85)90014-7 · Cited by 4,480
Adaptive filtering prediction and control
Goodwin, G. C., & Sin, K. S. (1984) · Cited by 3,400
Sensorless Vector and Direct Torque Control
Vas, P. (1998) · doi:10.1093/oso/9780198564652.001.0001 · Cited by 2,571
Sensorless Control of Induction Machines—With or Without Signal Injection?
Holtz, J. (2006) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.862324 · Cited by 712
Holtz, J., & Quan, J. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.813726 · Cited by 313
Holtz, J., & Quan, J. (2003) · Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344) · doi:10.1109/ias.2002.1043761 · Cited by 243
Soto, G. G., Mendes, E., & Razek, A. (1999) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:19990293 · Cited by 64
Cited by
Industrial Applications of the Kalman Filter: A Review
Auger, F., Hilairet, M., Guerrero, J. M., Monmasson, E., Orlowska-Kowalska, T., & Katsura, S. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2236994 · Cited by 590
Foo, G., & Rahman, M. F. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2030820 · Cited by 367
Foo, G., & Rahman, M. F. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2030815 · Cited by 198
Foo, G. H. B., & Rahman, M. F. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2036354 · Cited by 190
“2) closed-loop adaptive observers based on advanced models [7]–[16]; 3) estimation based on high-frequency signal injection, exploiting the saliency property of an IPMSM [17]–[23].”
BackgroundHigh gain observer for speed-sensorless motor drives: Algorithm and experiments
Wang, Y., Zhou, L., Bortoff, S. A., Satake, A., & Furutani, S. (2016) · 2016 IEEE International Conference on Advanced Intelligent Mechatronics (AIM) · doi:10.1109/aim.2016.7576921 · Cited by 8
Metadata
- Authors
- Barut, M., Bogosyan, S., & Gokasan, M.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2007-02
- Volume
- 54
- Issue
- 1
- Pages
- 272-280
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2123712464
- Cited by
- 329
- References
- 7
- FWCI
- 16.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.