A Three-Phase Inductive Power Transfer System for Roadway-Powered Vehicles
The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Abstract
The development of a new three-phase bipolar inductive power transfer system that provides power across the entire width of a roadway surface for automatic guided vehicles and people mover systems is described. A prototype system was constructed to verify the feasibility of the design for a number of moving loads (toy cars). Here, 40 A/phase is supplied at 38.4 kHz to a 13-m-long test track. Flat pickups are used on the underside of each vehicle to couple power from the track to the vehicle. Finite element modeling software was used to design the geometrical position of the track cables and to predict the power output. This design resulted in a considerably wider power delivery zone than possible using a single-phase track layout and has been experimentally verified. Mutual coupling effects between the various track phases require additional compensation to be added to ensure balanced three-phase currents.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Design Considerations for a Contactless Electric Vehicle Battery Charger
Wang, C.-S., Stielau, O. H., & Covic, G. A. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.855672 · Cited by 1,487
Self-citationWang, C.-S., Covic, G. A., & Stielau, O. H. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.822038 · Cited by 1,213
Self-citationStability and control of inductivelycoupled power transfer systems
Boys, J. T., Covic, G. A., & Green, A. W. (2000) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20000017 · Cited by 559
Self-citationDesign of loosely coupled inductive power transfer systems
Stielau, O. H., & Covic, G. A. (2002) · PowerCon 2000. 2000 International Conference on Power System Technology. Proceedings (Cat. No.00EX409) · doi:10.1109/icpst.2000.900036 · Cited by 328
Self-citationAnalysis and Design of an LCL-T Resonant Converter as a Constant-Current Power Supply
Borage, M., Tiwari, S., & Kotaiah, S. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.858729 · Cited by 271
Investigating an LCL Load Resonant Inverter for Inductive Power Transfer Applications
Wang, C.-S., Covic, G. A., & Stielau, O. H. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2004.830098 · Cited by 242
Self-citationThe design of a contact-less energy transfer system for a people mover system
Covic, G. A., Elliott, G., Stielau, O. H., Green, R. M., & Boys, J. T. (2002) · PowerCon 2000. 2000 International Conference on Power System Technology. Proceedings (Cat. No.00EX409) · doi:10.1109/icpst.2000.900035 · Cited by 165
Self-citationContactless Power Delivery System for Mining Applications
Klontz, K. W., Divan, D. M., Novotny, D. W., & Lorenz, R. D. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.363053 · Cited by 160
Contactless power delivery system for mining applications
Klontz, K. W., Divan, D. M., Novotny, D. W., & Lorenz, R. D. (2002) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.1991.178024 · Cited by 156
Large air-gap coupler for inductive charger [for electric vehicles]
Sakamoto, H., Harada, K., Washimiya, S., Takehara, K., Matsuo, Y., & Nakao, F. (1999) · IEEE Transactions on Magnetics · doi:10.1109/20.800578 · Cited by 133
Design of an IGBT-based LCL-resonant inverter for high-frequency induction heating
Dieckerhoff, S., Ruan, M. J., & Doncker, R. W. D. (2003) · doi:10.1109/ias.1999.806017 · Cited by 123
Sliding transformers for linear contactless power delivery
Barnard, J. M., Ferreira, J. A., & van Wyk, J. D. (1997) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.649938 · Cited by 91
Magnetically coupled systems for power transfer to electric vehicles
Elliott, G. A. J., Boys, J. T., & Green, A. W. (2002) · International Conference on Power Electronics and Drive Systems · doi:10.1109/peds.1995.404968 · Cited by 90
Self-citationContactless inductive power pickup system for Maglev applications
Song, B.-M., Kratz, R., & Gurol, S. (2003) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.2002.1043746 · Cited by 67
Lastowiecki, J., & Staszewski, P. (2006) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.885473 · Cited by 55
Contactless energy transmission to mobile loads by CLPS-test driving of an EV with starter batteries
Sato, F., Murakami, J., Suzuki, T., Matsuki, H., Kikuchi, S., Harakawa, K., Osada, H., & Seki, K. (1997) · IEEE Transactions on Magnetics · doi:10.1109/20.619710 · Cited by 41
Large air gap coupler for inductive charger
Sakamoto, H., Harada, K., Washimiya, S., Takehara, K., Matsuo, Y., & Nakao, F. (1999) · IEEE International Magnetics Conference · doi:10.1109/intmag.1999.837225 · Cited by 40
Cited by
Yilmaz, M., & Krein, P. T. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2212917 · Cited by 3,118
Modern Trends in Inductive Power Transfer for Transportation Applications
Covic, G. A., & Boys, J. T. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2264473 · Cited by 1,263
“Three-phase ground pads may comprise three single-phase pads or one pad specially designed for three-phase operation and were proposed [74], [75] and applied in various commercial systems [76]–[78].”
BackgroundSelf-citationCovic, G. A., & Boys, J. T. (2013) · Proceedings of the IEEE · doi:10.1109/jproc.2013.2244536 · Cited by 1,223
Self-citationDesign and Optimization of Circular Magnetic Structures for Lumped Inductive Power Transfer Systems
Budhia, M., Covic, G. A., & Boys, J. T. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2143730 · Cited by 1,039
Self-citationCompensation Topologies of High-Power Wireless Power Transfer Systems
Zhang, W., & Mi, C. C. (2016) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2015.2454292 · Cited by 992
Metadata
- Authors
- Covic, G. A., Boys, J. T., Kissin, M. L. G., & Lu, H. G.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2007-12
- Volume
- 54
- Issue
- 6
- Pages
- 3370-3378
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2139885046
- Cited by
- 439
- References
- 17
- FWCI
- 7.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.