A Three-Phase Inductive Power Transfer System for Roadway-Powered Vehicles
The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Abstract
The development of a new three-phase bipolar inductive power transfer system that provides power across the entire width of a roadway surface for automatic guided vehicles and people mover systems is described. A prototype system was constructed to verify the feasibility of the design for a number of moving loads (toy cars). Here, 40 A/phase is supplied at 38.4 kHz to a 13-m-long test track. Flat pickups are used on the underside of each vehicle to couple power from the track to the vehicle. Finite element modeling software was used to design the geometrical position of the track cables and to predict the power output. This design resulted in a considerably wider power delivery zone than possible using a single-phase track layout and has been experimentally verified. Mutual coupling effects between the various track phases require additional compensation to be added to ensure balanced three-phase currents.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Design Considerations for a Contactless Electric Vehicle Battery Charger
Wang, C.-S., Stielau, O. H., & Covic, G. A. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.855672 · Cited by 1,487
Self-citationWang, C.-S., Covic, G. A., & Stielau, O. H. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.822038 · Cited by 1,213
Self-citationStability and control of inductivelycoupled power transfer systems
Boys, J. T., Covic, G. A., & Green, A. W. (2000) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20000017 · Cited by 559
Self-citationDesign of loosely coupled inductive power transfer systems
Stielau, O. H., & Covic, G. A. (2002) · PowerCon 2000. 2000 International Conference on Power System Technology. Proceedings (Cat. No.00EX409) · doi:10.1109/icpst.2000.900036 · Cited by 328
Self-citationAnalysis and Design of an LCL-T Resonant Converter as a Constant-Current Power Supply
Borage, M., Tiwari, S., & Kotaiah, S. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.858729 · Cited by 271
Investigating an LCL Load Resonant Inverter for Inductive Power Transfer Applications
Wang, C.-S., Covic, G. A., & Stielau, O. H. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2004.830098 · Cited by 242
Self-citationThe design of a contact-less energy transfer system for a people mover system
Covic, G. A., Elliott, G., Stielau, O. H., Green, R. M., & Boys, J. T. (2002) · PowerCon 2000. 2000 International Conference on Power System Technology. Proceedings (Cat. No.00EX409) · doi:10.1109/icpst.2000.900035 · Cited by 165
Self-citationContactless Power Delivery System for Mining Applications
Klontz, K. W., Divan, D. M., Novotny, D. W., & Lorenz, R. D. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.363053 · Cited by 160
Contactless power delivery system for mining applications
Klontz, K. W., Divan, D. M., Novotny, D. W., & Lorenz, R. D. (2002) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.1991.178024 · Cited by 156
Large air-gap coupler for inductive charger [for electric vehicles]
Sakamoto, H., Harada, K., Washimiya, S., Takehara, K., Matsuo, Y., & Nakao, F. (1999) · IEEE Transactions on Magnetics · doi:10.1109/20.800578 · Cited by 133
Cited by
Yilmaz, M., & Krein, P. T. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2212917 · Cited by 3,118
Modern Trends in Inductive Power Transfer for Transportation Applications
Covic, G. A., & Boys, J. T. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2264473 · Cited by 1,263
“Three-phase ground pads may comprise three single-phase pads or one pad specially designed for three-phase operation and were proposed [74], [75] and applied in various commercial systems [76]–[78].”
BackgroundSelf-citationCovic, G. A., & Boys, J. T. (2013) · Proceedings of the IEEE · doi:10.1109/jproc.2013.2244536 · Cited by 1,223
Self-citationDesign and Optimization of Circular Magnetic Structures for Lumped Inductive Power Transfer Systems
Budhia, M., Covic, G. A., & Boys, J. T. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2143730 · Cited by 1,039
Self-citationCompensation Topologies of High-Power Wireless Power Transfer Systems
Zhang, W., & Mi, C. C. (2016) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2015.2454292 · Cited by 992
Wireless Power Transfer for Vehicular Applications: Overview and Challenges
Patil, D., McDonough, M. K., Miller, J. M., Fahimi, B., & Balsara, P. T. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2780627 · Cited by 991
Wireless Charging Technologies: Fundamentals, Standards, and Network Applications
Lu, X., Wang, P., Niyato, D., Kim, D. I., & Han, Z. (2016) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2015.2499783 · Cited by 968
Simultaneous Wireless Information and Power Transfer (SWIPT): Recent Advances and Future Challenges
Ponnimbaduge Perera, T. D., Jayakody, D. N. K., Sharma, S. K., Chatzinotas, S., & Li, J. (2018) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2017.2783901 · Cited by 920
“Resonant inductive coupling Several meters in indoor and outdoor environments (Near-Field) Tuned wire coils, resonators [38] [39] [40] [41] [42]”
BackgroundModern Advances in Wireless Power Transfer Systems for Roadway Powered Electric Vehicles
Mi, C. C., Buja, G., Choi, S. Y., & Rim, C. T. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2574993 · Cited by 841
A Bidirectional Inductive Power Interface for Electric Vehicles in V2G Systems
Madawala, U. K., & Thrimawithana, D. J. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2114312 · Cited by 813
Optimal Design of ICPT Systems Applied to Electric Vehicle Battery Charge
Sallan, J., Villa, J. L., Llombart, A., & Sanz, J. F. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2015359 · Cited by 734
Advances in Wireless Power Transfer Systems for Roadway-Powered Electric Vehicles
Choi, S. Y., Gu, B. W., Jeong, S. Y., & Rim, C. T. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2343674 · Cited by 682
Electrical Motor Drivelines in Commercial All-Electric Vehicles: A Review
de Santiago, J., Bernhoff, H., Ekergård, B., Eriksson, S., Ferhatovic, S., Waters, R., & Leijon, M. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2011.2177873 · Cited by 669
“2) Active Roads: Roads with power supply, either with a pantograph or with inductive coupling, as trolleybuses, are proposed [86]–[88].”
Narrow-Width Inductive Power Transfer System for Online Electrical Vehicles
Huh, J., Lee, S. W., Lee, W. Y., Cho, G. H., & Rim, C. T. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2160972 · Cited by 669
Inductive Wireless Power Transfer Charging for Electric Vehicles—A Review
Mahesh, A., Chokkalingam, B., & Mihet-Popa, L. (2021) · IEEE Access · doi:10.1109/access.2021.3116678 · Cited by 513
“Hence, most of the works aimed to reduce the impact of the IPMI [100], [179]–[181].”
BackgroundInfluentialZhang, W., Wong, S.-C., Tse, C. K., & Chen, Q. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2249112 · Cited by 505
Overview of wireless power transfer technologies for electric vehicle battery charging
Musavi, F., & Eberle, W. (2014) · IET Power Electronics · doi:10.1049/iet-pel.2013.0047 · Cited by 417
Zhang, W., Wong, S.-C., Tse, C. K., & Chen, Q. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2273364 · Cited by 406
Economic Analysis of the Dynamic Charging Electric Vehicle
Jeong, S., Jang, Y. J., & Kum, D. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2424712 · Cited by 374
A Unity-Power-Factor IPT Pickup for High-Power Applications
Keeling, N. A., Covic, G. A., & Boys, J. T. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2027255 · Cited by 371
Self-citationAdvances in High-Power Wireless Charging Systems: Overview and Design Considerations
Feng, H., Tavakoli, R., Onar, O. C., & Pantic, Z. (2020) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3012543 · Cited by 368
General Analysis on the Use of Tesla's Resonators in Domino Forms for Wireless Power Transfer
Zhong, W., Lee, C. K., & Hui, S. Y. R. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2171176 · Cited by 362
A Study on Magnetic Field Repeater in Wireless Power Transfer
Ahn, D., & Hong, S. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2188254 · Cited by 351
Effects of Magnetic Coupling of Nonadjacent Resonators on Wireless Power Domino-Resonator Systems
Lee, C. K., Zhong, W. X., & Hui, S. Y. R. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2169460 · Cited by 309
ZCS $LCC$-Compensated Resonant Inverter for Inductive-Power-Transfer Application
Pantic, Z., Bai, S., & Lukic, S. M. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2081954 · Cited by 305
A Dynamic Charging System With Reduced Output Power Pulsation for Electric Vehicles
Lu, F., Zhang, H., Hofmann, H., & Mi, C. C. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2563380 · Cited by 298
A critical review on wireless charging for electric vehicles
Machura, P., & Li, Q. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.01.027 · Cited by 295
An Optimizable Circuit Structure for High-Efficiency Wireless Power Transfer
Chen, L., Liu, S., Zhou, Y. C., & Cui, T. J. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2179275 · Cited by 263
Applying LCC Compensation Network to Dynamic Wireless EV Charging System
Zhu, Q., Wang, L., Guo, Y., Liao, C., & Li, F. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2529561 · Cited by 254
Reflexive Field Containment in Dynamic Inductive Power Transfer Systems
Lee, K., Pantic, Z., & Lukic, S. M. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2287262 · Cited by 173
Metadata
- Authors
- Covic, G. A., Boys, J. T., Kissin, M. L. G., & Lu, H. G.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2007-12
- Volume
- 54
- Issue
- 6
- Pages
- 3370-3378
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2139885046
- Cited by
- 439
- References
- 17
- FWCI
- 7.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.