A Zero-Voltage-Switching Bidirectional DC–DC Converter With State Analysis and Soft-Switching-Oriented Design Consideration
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
This paper proposes a new soft-switching bidirectional DC/DC converter. The proposed converter achieves zero-voltage switching (ZVS) for the entire main switches and zero-current switching for the rectifier diodes in the large-load range. These features reduce switching loss, voltage and current stresses, and diode reverse-recovery effect. The simple electrical isolated topology with the soft-switching characteristic provides an attractive solution for a battery charge/discharge system in an electric vehicle, distributed power system, or uninterruptible power system. This paper describes the operation principle and the ZVS condition in detail. The mathematical model based on the state-space averaging method is also deduced to depict the performance characteristic. Then, design guidelines are presented to ensure the ZVS condition for all the switches. Finally, simulation and experimental results obtained from a 1-kW prototype verify the discussed theoretical analysis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A new ZVS bidirectional DC-DC converter for fuel cell and battery application
Peng, F. Z., Li, H., Su, G.-J., & Lawler, J. S. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.820550 · Cited by 782 · cited 4×
“[1], [6], [15] proposed a new topology with the less-active switches than the full-bridge topology.”
BackgroundMethodInfluential
Cited by
Forouzesh, M., Siwakoti, Y. P., Gorji, S. A., Blaabjerg, F., & Lehman, B. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2652318 · Cited by 2,123
Efficiency-Optimized High-Current Dual Active Bridge Converter for Automotive Applications
Krismer, F., & Kolar, J. W. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2112312 · Cited by 747
Jung, J.-H., Kim, H.-S., Ryu, M.-H., & Baek, J.-W. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2213346 · Cited by 621
Chen, W., Rong, P., & Lu, Z. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2037099 · Cited by 464
Zhao, B., Song, Q., Liu, W., & Sun, W. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2210374 · Cited by 345
Zhao, B., Song, Q., & Liu, W. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2210563 · Cited by 325
A Bidirectional LLC Resonant Converter With Automatic Forward and Backward Mode Transition
Jiang, T., Zhang, J., Wu, X., Sheng, K., & Wang, Y. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2307329 · Cited by 264
Analysis and Implementation of a Novel Bidirectional DC–DC Converter
Yang, L.-S., & Liang, T.-J. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2134060 · Cited by 261
A Bidirectional Three-Level DC–DC Converter for the Ultracapacitor Applications
Grbovic, P. J., Delarue, P., Le Moigne, P., & Bartholomeus, P. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2038338 · Cited by 248
“Isolated dc–dc converter topologies with soft switching have been analyzed in [2], [25], and [26].”
BackgroundZhang, Z., Thomsen, O. C., & Andersen, M. A. E. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2134051 · Cited by 102
Metadata
- Authors
- Ma, G., Qu, W., Yu, G., Liu, Y., Liang, N., & Li, W.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2009-06
- Volume
- 56
- Issue
- 6
- Pages
- 2174-2184
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2134621221
- Cited by
- 136
- References
- 1
- FWCI
- 9.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.