Novel Switched Reluctance Machine Configuration With Higher Number of Rotor Poles Than Stator Poles: Concept to Implementation
The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Abstract
There is a great demand for efficient, quiet, reliable, and cost-effective motor drives for propulsion systems in hybrid and plug-in hybrid electric vehicles. Owing to a rigid structure and the absence of magnetic source on the rotor, a switched reluctance machine (SRM) is inherently robust and cost effective. In spite of these advantages, several challenges in the control of this machine remain an issue, including high levels of torque ripple, acoustic noise, and a relatively low torque density. This paper presents a new family of SRMs which have higher number of rotor poles than stator poles. Using a newly defined pole design formula, several novel combinations of the stator-rotor poles have been proposed. From the simulation and experimental analysis of a prototype 6/10 configuration, it has been observed that this machine produces higher torque per unit volume and comparable torque ripple when compared to a conventional 6/4 SRM with similar number of phases and constraints in volume. The results presented in this paper make this family of machines a strong contender for survivable high-performance applications for automotive propulsion systems. The simulation and experimental results for the prototype 6/10 configuration have been presented and compared to a conventional 6/4 design for verification.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The state of the art of electric, hybrid, and fuel cell vehicles
Chan, C. C. (2007) · Proceedings of the IEEE · doi:10.1109/jproc.2007.892489 · Cited by 1,987
Switched Reluctance Motors and Their Control
Miller, T. J. E. (1993) · Medical Entomology and Zoology · Cited by 1,583
Overview of Permanent-Magnet Brushless Drives for Electric and Hybrid Electric Vehicles
Chau, K. T., Chan, C. C., & Liu, C. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.918403 · Cited by 1,496
Emadi, A., Lee, Y. J., & Rajashekara, K. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.922768 · Cited by 1,461 · cited 2×
“In order to improve the effectiveness of an HEV, there are several areas that require optimization, which include efficiency of the drive, reduction in size, ruggedness of the overall system, and cost effectiveness of electric machines and associated drive electronics [4]–[6].”
BackgroundSelf-citationElectric Motor Drive Selection Issues for HEV Propulsion Systems: A Comparative Study
Zeraoulia, M., Benbouzid, M. E. H., & Diallo, D. (2006) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2006.878719 · Cited by 691
Hybrid Electric Vehicles: Architecture and Motor Drives
Ehsani, M., Gao, Y., & Miller, J. M. (2007) · Proceedings of the IEEE · doi:10.1109/jproc.2007.892492 · Cited by 490
Propulsion system design of electric and hybrid vehicles
Ehsani, M., Rahman, K. M., & Toliyat, H. A. (1997) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.557495 · Cited by 443
Making the case for applications of switched reluctance motor technology in automotive products
Krishnamurthy, M., Edrington, C. S., Emadi, A., Asadi, P., Ehsani, M., & Fahimi, B. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.872371 · Cited by 242
Self-citationPlug-in hybrid electric vehicle developments in the US: Trends, barriers, and economic feasibility
Wirasingha, S. G., Schofield, N., & Emadi, A. (2008) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2008.4677702 · Cited by 177
Self-citationEhsani, M., Gao, Y., & Butler, K. L. (1999) · IEEE Transactions on Vehicular Technology · doi:10.1109/25.806770 · Cited by 112
High-performance fully digital switched reluctance motor controller for vehicle propulsion
Rahman, K. M., & Schulz, S. E. (2002) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2002.800568 · Cited by 108
Performance analysis of electric motor drives for electric and hybrid electric vehicle applications
Rahman, K. M., & Ehsani, M. (2002) · doi:10.1109/pet.1996.565909 · Cited by 96
Temperatures Evaluation in an Integrated Motor Drive for Traction Applications
Tenconi, A., Profumo, F., Bauer, S. E., & Hennen, M. D. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2003099 · Cited by 73
Take this car and plug it [plug-in hybrid vehicles]
Jones, W. D. (2005) · IEEE Spectrum · doi:10.1109/mspec.2005.1460339 · Cited by 36
Williamson, S. S. (2007) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.2007.4342219 · Cited by 35
Cited by
Making the Case for Electrified Transportation
Bilgin, B., Magne, P., Malysz, P., Yang, Y., Pantelic, V., Preindl, M., Korobkine, A., Jiang, W., Lawford, M., & Emadi, A. (2015) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2015.2437338 · Cited by 455
“Using advanced design and control techniques, torque ripples, noise, and vibration in SRM can be reduced [32]–[34].”
BackgroundSelf-citationGan, C., Wu, J., Sun, Q., Kong, W., Li, H., & Hu, Y. (2018) · IEEE Access · doi:10.1109/access.2018.2837111 · Cited by 286
An Extended-Speed Low-Ripple Torque Control of Switched Reluctance Motor Drives
Ye, J., Bilgin, B., & Emadi, A. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2316272 · Cited by 277
Self-citation
Metadata
- Authors
- Desai, P. C., Krishnamurthy, M., Schofield, N., & Emadi, A.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2010-02
- Volume
- 57
- Issue
- 2
- Pages
- 649-659
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2149184143
- Cited by
- 263
- References
- 15
- FWCI
- 11.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.