CoChat

Design of a Fault-Tolerant Controller Based on Observers for a PMSM Drive

Akrad, Ahmad, Hilairet, Mickaël, Diallo, Demba · 2011 · IEEE Transactions on Industrial Electronics
Cited by 155

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Abstract

This paper presents a specific controller architecture devoted to obtain a permanent-magnet synchronous motor (PMSM) drive that is robust to mechanical sensor failure. In order to increase the reliability which is a key issue in industrial and transportation applications (electric or hybrid ground vehicle or aerospace actuators), two virtual sensors (a two-stage extended Kalman filter and a back-electromotive-force adaptive observer) and a maximum-likelihood voting algorithm are combined with the actual sensor to build a fault-tolerant controller (FTC). The observers are evaluated through simulation and experimental results. The FTC feasibility is proved through simulations and experiments on a 1.1-kW PMSM drive.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1109/tie.2010.2050756

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Research works printed but not linked: 27

  1. 10.1109/TIE.2007.895076 · DOI · Paper page
  2. hilairet, 2006, A self-reconfigurable and fault-tolerant induction motor control architecture for hybrid electric vehicles, Proc IEEE ICEM, 350
  3. 10.1109/TIE.2008.921469 · DOI
  4. 10.1109/TIE.2007.911949 · DOI · Paper page
  5. 10.1109/TIE.2009.2025290 · doi:10.1109/tie.2009.2025290
  6. 10.1109/41.969388 · DOI
  7. vas, 1998, Sensorless Vector and Direct Torque Control, 10.1093/oso/9780198564652.001.0001 · DOI · Paper page
  8. 10.1109/TCST.2007.916317 · DOI
  9. grewal, 1993, Kalman Filtering Theory and Practice
  10. 10.1109/9.739135 · doi:10.1109/9.739135
  11. 10.1109/EMPDP.2001.905068 · doi:10.1109/empdp.2001.905068
  12. 10.1109/TIE.2008.920645 · DOI
  13. 10.1109/EMPDP.1994.592508 · doi:10.1109/empdp.1994.592508
  14. 10.1109/TIE.2007.911951 · DOI · Paper page
  15. 10.1109/24.406576 · doi:10.1109/24.406576
  16. 10.1109/TIE.2008.2005019 · DOI · Paper page
  17. 10.1109/TVT.2004.833610 · DOI · Paper page
  18. 10.1109/TIE.2008.928103 · doi:10.1109/tie.2008.928103
  19. 10.1109/JPROC.2006.892482 · DOI · Paper page
  20. 10.1109/TIE.2008.918403 · DOI · Paper page
  21. 10.1109/IECON.2008.4758398 · DOI
  22. 10.1109/TIE.2003.809391 · doi:10.1109/tie.2003.809391
  23. 10.1016/j.automatica.2009.04.005 · DOI
  24. boulbair, 2004, Sensorless control of a PMSM using an efficient extended Kalman filter, Proc ICEM, 637
  25. 10.1109/TIA.2004.824490 · doi:10.1109/tia.2004.824490
  26. de silva, 2005, Mechatronics An Integrated Approach
  27. levine, 0, The Control Handbook

Cited by

See all 155

Metadata

Authors
Akrad, A., Hilairet, M., & Diallo, D.
Venue
IEEE Transactions on Industrial Electronics
Published
2011-04
Volume
58
Issue
4
Pages
1416-1427
ISSN
  • 0278-0046 (ISSN-L)
  • 1557-9948
OpenAlex
W2161004812
Cited by
155
References
2
FWCI
13.15
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.