The DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.
Recent Advances in Modeling and Online Detection of Stator Interturn Faults in Electrical Motors
Abstract
Online fault diagnosis plays a crucial role in providing the required fault tolerance to drive systems used in safety-critical applications. Short-circuit faults are among the common faults occurring in electrical machines. This paper presents a review of existing techniques available for online stator interturn fault detection and diagnosis (FDD) in electrical machines. Special attention is given to short-circuit-fault diagnosis in permanent-magnet machines, which are fast replacing traditional machines in a wide variety of applications. Recent techniques that use signals analysis, models, or knowledge-based systems for FDD are reviewed in this paper. Motor current is the most commonly analyzed signal for fault diagnosis. Hence, motor current signature analysis is a topic of elaborate discussion in this paper. Additionally, parametric and finite-element models that were designed to simulate interturn-fault conditions are reviewed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Advances in Diagnostic Techniques for Induction Machines
Bellini, A., Filippetti, F., Tassoni, C., & Capolino, G.-A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2007527 · Cited by 1,140
Current Signature Analysis to Detect Induction Motor Faults
Thomson, W. T., & Fenger, M. (2001) · IEEE Industry Applications Magazine · doi:10.1109/2943.930988 · Cited by 1,139
Cause and analysis of stator and rotor failures in three-phase squirrel-cage induction motors
Bonnett, A. H., & Soukup, G. C. (1992) · IEEE Transactions on Industry Applications · doi:10.1109/28.148460 · Cited by 593
Fault Detection in Induction Machines Using Power Spectral Density in Wavelet Decomposition
Cusid�Cusido, J., Romeral, L., Ortega, J. A., Rosero, J. A., & Garc�aGarcia Espinosa, A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.911960 · Cited by 512
Grubic, S., Aller, J. M., Lu, B., & Habetler, T. G. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2004665 · Cited by 490
Cause and analysis of stator and rotor failures in 3-phase squirrel cage induction motors
Bonnett, A. K., & Soukup, G. C. (2002) · Conference Record of 1991 Annual Pulp and Paper Industry Technical Conference · doi:10.1109/papcon.1991.239667 · Cited by 489
Henao, H., Demian, C., & Capolino, G.-A. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.816531 · Cited by 361
Increased Efficiency Versus Increased Reliability
Bonnett, A., & Yung, C. (2008) · IEEE Industry Applications Magazine · doi:10.1109/mia.2007.909802 · Cited by 359
A Survey of Methods for Detection of Stator-Related Faults in Induction Machines
Tallam, R. M., Lee, S. B., Stone, G. C., Kliman, G. B., Yoo, J., Habetler, T. G., & Harley, R. G. (2007) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2007.900448 · Cited by 301
Modeling of Surface-Mounted Permanent Magnet Synchronous Motors With Stator Winding Interturn Faults
Romeral, L., Urresty, J. C., Riba Ruiz, J.-R., & Garcia Espinosa, A. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2062480 · Cited by 282
da Silva, A. M., Povinelli, R. J., & Demerdash, N. A. O. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.909060 · Cited by 266
Ballal, M. S., Khan, Z. J., Suryawanshi, H. M., & Sonolikar, R. L. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.888789 · Cited by 251
Martins, J. F., Pires, V. F., & Pires, A. J. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2006.888790 · Cited by 219
Rosero, J. A., Romeral, L., Ortega, J. A., & Rosero, E. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2011580 · Cited by 214
Kim, K.-H. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2060463 · Cited by 184
Bouzid, M., Champenois, G., Bellaaj, N. M., Signac, L., & Jelassi, K. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2004667 · Cited by 179
Online Model-Based Stator-Fault Detection and Identification in Induction Motors
De Angelo, C. H., Bossio, G. R., Giaccone, S. J., Valla, M. I., Solsona, J. A., & Garcia, G. O. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2012468 · Cited by 166
Khan, M., & Rahman, M. A. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2004662 · Cited by 163
Nonstationary Motor Fault Detection Using Recent Quadratic Time–Frequency Representations
Rajagopalan, S., Restrepo, J. A., Aller, J. M., Habetler, T. G., & Harley, R. G. (2008) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2008.921431 · Cited by 161
Cruz, S. M. A., & Cardoso, A. J. M. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2005.847975 · Cited by 158
Cheng, S., Zhang, P., & Habetler, T. G. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2064276 · Cited by 153
Strangas, E. G., Aviyente, S., & Zaidi, S. S. H. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2007529 · Cited by 148
Zanardelli, W. G., Strangas, E. G., & Aviyente, S. (2007) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2007.900446 · Cited by 145
Briz, F., Degner, M. W., Zamarrón, A., & Guerrero, J. M. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.813746 · Cited by 132
A Detailed Model of Induction Machines With Saturation Extendable for Fault Analysis
Nandi, S. (2004) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2004.834101 · Cited by 125
Analytical Prediction of the Short-Circuit Current in Fault-Tolerant Permanent-Magnet Machines
Sun, Z., Wang, J., Howe, D., & Jewell, G. W. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2005019 · Cited by 121
Fault Analysis and Parameter Identification of Permanent-Magnet Motors by the Finite-Element Method
Vaseghi, B., Takorabet, N., & Meibody‐Tabar, F. (2009) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2009.2022156 · Cited by 106
Awadallah, M. A., Morcos, M. M., Gopalakrishnan, S., & Nehl, T. W. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2005.847976 · Cited by 105
Neti, P., & Nandi, S. (2009) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2009.2018905 · Cited by 105
Fault Analysis of a PM Brushless DC Motor Using Finite Element Method
Dai, M., Keyhani, A., & Sebastian, T. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2004.841516 · Cited by 102
Mohammed, O. A., Liu, Z., Liu, S., & Abed, N. Y. (2007) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2006.892301 · Cited by 97
Wu, Q. H., & Nandi, S. (2010) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2045329 · Cited by 92
Detection of stator short circuits in VSI-fed brushless DC motors using wavelet transform
Awadallah, M. A., Morcos, M. M., Gopalakrishnan, S., & Nehl, T. W. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2005.847964 · Cited by 87
Kim, K., Choi, D.-U., Gu, B.-G., & Jung, I.-S. (2010) · IET Electric Power Applications · doi:10.1049/iet-epa.2009.0183 · Cited by 71
The Internal Fault Analysis of Brushless DC Motors Based on the Winding Function Theory
Kim, T., Lee, H.-W., & Kwak, S. (2009) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2009.2013246 · Cited by 65
Interturn Fault Diagnosis in Induction Motors Using the Pendulous Oscillation Phenomenon
Mirafzal, B., Povinelli, R. J., & Demerdash, N. A. O. (2006) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2005.853767 · Cited by 64
On the short-circuiting Fault Detection in a PMSM by means of Stator Current Transformations
Rosero, J. A., Romeral, L., Cusido, J., Garcia, A., & Ortega, J. A. (2007) · 2007 IEEE Power Electronics Specialists Conference · doi:10.1109/pesc.2007.4342300 · Cited by 63
An On-Line Stator Turn Fault Detection Method for Interior PM Synchronous Motor Drives
Lee, Y., & Habetler, T. G. (2007) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apex.2007.357610 · Cited by 60
Mohammed, O. A., Liu, S., & Liu, Z. (2006) · Digest of the Fifth Biennial IEEE Conference on Electromagnetic Field Computation · doi:10.1109/cefc-06.2006.1632949 · Cited by 59
Kallesøe, C. S., Izadi‐Zamanabadi, R., Vadstrup, P., & Rasmussen, H. (2007) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2007.900494 · Cited by 55
Gerada, C., Bradley, K. J., Sumner, M., Wheeler, P. W., Picker, S., Clare, J., Whitley, C., & Towers, G. (2007) · IEEE Industry Applications Magazine · doi:10.1109/mia.2007.322274 · Cited by 54
Inverter statistics for online detection of stator asymmetries in inverter-fed induction motors
Wolbank, T. M., Loparo, K. A., & Wohrnschimmel, R. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.814576 · Cited by 42
Winding turn-to-turn faults in permanent magnet synchronous machine drives
Gerada, C., Bradley, K., & Sumner, M. (2005) · doi:10.1109/ias.2005.1518481 · Cited by 41
Wu, Q. H., & Nandi, S. (2008) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/08ias.2008.25 · Cited by 38
Chai, J., Wang, J., Atallah, K., & Howe, D. (2007) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/07ias.2007.91 · Cited by 33
Fault detection of a five-phase Permanent-Magnet machine
Bianchini, C., Fornasiero, E., Matzen, T. N., Bianchi, N., & Bellini, A. (2008) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2008.4758125 · Cited by 31
Digital Signal Processing for Induction Machines Diagnosis - A Review
Kia, S. H., Henao, H., & Capolino, G. (2007) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2007.4460325 · Cited by 30
Permeance Network Modeling of the Stator Winding Faults in Electrical Machines
Mahyob, A., Reghem, P., & Barakat, G. (2009) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2009.2012780 · Cited by 28
Double-fed three-phase induction machine model for simulation of inter-turn short circuit fault
Yazidi, A., Henao, H., Capolino, G., Capocchi, L., & Fédérici, D. (2009) · IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc.2009.5075263 · Cited by 27
The application of wavelets for the detection of inter-turn faults in induction machines
Barendse, P., Herndler, B., Khan, A., & Pillay, P. (2009) · IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc.2009.5075386 · Cited by 27
Khov, M., Régnier, J., & Faucher, J. (2009) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2009.5292797 · Cited by 25
A New Algorithm for the Detection of Faults in Permanent Magnet Machines
Barendse, P., & Pillay, P. (2006) · Proceedings of the Annual Conference of the IEEE Industrial Electronics Society · doi:10.1109/iecon.2006.347409 · Cited by 22
Khoobroo, A., & Fahimi, B. (2009) · IEEE International Electric Machines & Drives Conference (IEMDC) · doi:10.1109/iemdc.2009.5075279 · Cited by 13
Application of Particle Swarm Optimization to PMSM Stator Fault Diagnosis
Liu, L., Cartes, D. A., & Liu, W. (2006) · 2022 International Joint Conference on Neural Networks (IJCNN) · doi:10.1109/ijcnn.2006.246942 · Cited by 10
Research works printed but not linked: 4
- 10.1109/ICELMACH.2008.4800099 · doi:10.1109/icelmach.2008.4800099
- 10.1109/TIE.2009.2025715 · doi:10.1109/tie.2009.2025715
- 10.1109/PESC.2001.954450 · doi:10.1109/pesc.2001.954450
- 10.1109/ICIEA.2007.4318852 · doi:10.1109/iciea.2007.4318852
Cited by
From Model, Signal to Knowledge: A Data-Driven Perspective of Fault Detection and Diagnosis
Dai, X., & Gao, Z. (2013) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2013.2243743 · Cited by 728
Riera-Guasp, M., Antonino-Daviu, J. A., & Capolino, G.-A. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2375853 · Cited by 573
A Survey on Wind Turbine Condition Monitoring and Fault Diagnosis—Part I: Components and Subsystems
Qiao, W., & Lu, D. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2422112 · Cited by 533
Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges
Orlowska-Kowalska, T., Wolkiewicz, M., Pietrzak, P., Skowron, M., Ewert, P., Tarchala, G., Krzysztofiak, M., & Kowalski, C. T. (2022) · IEEE Access · doi:10.1109/access.2022.3180153 · Cited by 328
“Other time-frequency signal analysis methods applied in the diagnostics use a quadratic time-frequency distribution [19], [27], [29], [32].”
BackgroundMethodEbrahimi, B. M., Javan Roshtkhari, M., Faiz, J., & Khatami, S. V. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2263777 · Cited by 271
Metadata
- Authors
- Gandhi, A., Corrigan, T., & Parsa, L.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2011-05
- Volume
- 58
- Issue
- 5
- Pages
- 1564-1575
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2145223406
- Cited by
- 544
- References
- 54
- FWCI
- 43.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.