New Configuration of Traction Converter With Medium-Frequency Transformer Using Matrix Converters
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
This paper presents a new configuration of a main traction converter with a medium-frequency transformer (MFT) using matrix converters intended for locomotives and particularly for suburban units supplied by a 25-kV/50-Hz and/or 15-kV/16.7-Hz ac electrification system. Single-phase matrix converters are employed in the primary medium-voltage converter which is directly connected to the ac trolley line. The output of the primary ac/ac converter supplies the primary side of the MFT. The proposed MFT-based topology of the traction converter replaces the bulky main line transformer found on board railway vehicles. Particularly in countries with a catenary of 15 kV/16.7 Hz, very low catenary frequency results in huge and heavy traction transformers. The developed topology is a power electronics solution that considerably reduces weight and losses in a traction propulsion system. The proposed converter configuration with cascaded matrix converters on the primary side of the MFT presents a new research direction in the field of traction converters with MFTs. This paper describes in detail the proposed power circuit and the control of the traction converter. The behavior of the traction converter configuration has been analyzed using simulations and experimental tests carried out on a developed low-voltage laboratory prototype of a traction converter with a rated power of 4 kVA. Based on extensive simulation and experimental study, this paper reviews the benefits, drawbacks, and constraints of the developed traction converter configuration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A New AC/AC Multilevel Converter Family
Glinka, M., & Marquardt, R. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.843973 · Cited by 772 · cited 1×
“A further interesting configuration of the primary converter represents the ac/ac modular multilevel converter (M2LC) topology introduced, e.g., in [ 4 ], [9], and [15]‐[18].”
BackgroundMedium frequency topology in railway applications
Steiner, M., & Reinold, H. (2007) · 2007 European Conference on Power Electronics and Applications · doi:10.1109/epe.2007.4417570 · Cited by 249
Multilevel Converter for Traction Applications: Small-Scale Prototype Tests Results
Carpita, M., Marchesoni, M., Pellerin, M., & Moser, D. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.918645 · Cited by 100
Cited by
Review of Solid-State Transformer Technologies and Their Application in Power Distribution Systems
She, X., Huang, A. Q., & Burgos, R. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2277917 · Cited by 1,164
Solid-State Transformers: On the Origins and Evolution of Key Concepts
Huber, J. E., & Kolar, J. W. (2016) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2016.2588878 · Cited by 449
“Recently, this concept has been combined with the cascading of converter cells to obtain SST topologies for traction [41] or multipurpose applications [42].”
BackgroundPower Quality Issues in Railway Electrification: A Comprehensive Perspective
Mousavi Gazafrudi, S. M., Tabakhpour Langerudy, A., Fuchs, E. F., & Al-Haddad, K. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2386794 · Cited by 340
Design and Demonstration of a 3.6-kV–120-V/10-kVA Solid-State Transformer for Smart Grid Application
She, X., Yu, X., Wang, F., & Huang, A. Q. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2293471 · Cited by 324
“Previous works on the SST either focus on parts of the circuit [17], [18], [25], [27], [28], or have achieved limited functional demonstration [22]–[24], [26], [29], or are mainly designed for traction systems [30]–[36].”
BackgroundGu, C., Zheng, Z., Xu, L., Wang, K., & Li, Y. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2416212 · Cited by 221
She, X., Huang, A. Q., Wang, F., & Burgos, R. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2216245 · Cited by 161
“On the other hand, SST is considered as the promising candidate for the applications where low-frequency transformers are dominating, such as traction/locomotives, solar farm, wind farm (WF), charge station, and smart grid, for reducing the volume and weight of the system [16]–[20].”
BackgroundIntegration of Large Photovoltaic and Wind System by Means of Smart Transformer
Zhu, R., De Carne, G., Deng, F., & Liserre, M. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2701758 · Cited by 71
Zheng, L., Han, X., Xu, C., Kandula, R. P., Graber, L., Saeedifard, M., & Divan, D. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3172946 · Cited by 42
A Leakage-Inductance-Tolerant Commutation Strategy for Isolated AC/AC Converters
Nasir, U., Costabeber, A., Rivera, M., Wheeler, P., & Clare, J. (2019) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2018.2861326 · Cited by 35
“The opportunity to shape these scenarios for SSTs comes, for example, from future distribution systems [6] and new traction systems [5, 7].”
BackgroundFull-ZVS modulation for all-SiC ISOP-type isolated front end (IFE) solid-state transformer
Huber, J. E., Rothmund, D., Wang, L., & Kolar, J. W. (2016) · 2016 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2016.7855128 · Cited by 31
Metadata
- Authors
- Drabek, P., Peroutka, Z., Pittermann, M., & Cedl, M.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2011-11
- Volume
- 58
- Issue
- 11
- Pages
- 5041-5048
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2068870187
- Cited by
- 148
- References
- 3
- FWCI
- 8.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.