The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Development of a Single-Sided Flux Magnetic Coupler for Electric Vehicle IPT Charging Systems
Abstract
Inductive power transfer is a practical method for recharging electric vehicles because it is safe, convenient, and reliable. The performance of the magnetic couplers that transfer power determines the overall feasibility of a complete system. Circular couplers are the most common topology in the literature; however, they have fundamentally limited coupling. Their flux patterns necessarily limit the operational air gap as well as tolerance to horizontal misalignment. A new polarized coupler topology [referred to as a double D (DD)] is presented, which overcomes these difficulties. DDs provide a charge zone five times larger than that possible with circular pads for a similar material cost and are smaller. A 0.31-m2DD enables 2 kW of power transfer over an oval area measuring 540 mm × 800 mm with a 200-mm air gap. Leakage magnetic fields have been investigated and show that circular and DD couplers operating under similar power transfer conditions produce similar levels. Both topologies can be designed and operated to ensure compliance with international guidelines.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ahlbom, A. (1998) · Health Physics · Cited by 5,817
Design Considerations for a Contactless Electric Vehicle Battery Charger
Wang, C.-S., Stielau, O. H., & Covic, G. A. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.855672 · Cited by 1,487
Self-citationDesign and Optimization of Circular Magnetic Structures for Lumped Inductive Power Transfer Systems
Budhia, M., Covic, G. A., & Boys, J. T. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2143730 · Cited by 1,039
Self-citationStability and control of inductivelycoupled power transfer systems
Boys, J. T., Covic, G. A., & Green, A. W. (2000) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20000017 · Cited by 559
Self-citationHui, S. Y. R., & Ho, W. W. C. (2005) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.846550 · Cited by 501
Design of a contactless battery charger for cellular phone
Kim, C.-G., Seo, D.-H., You, J.-S., Park, J.-H., & Cho, B. H. (2001) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.969404 · Cited by 345
Design of loosely coupled inductive power transfer systems
Stielau, O. H., & Covic, G. A. (2002) · PowerCon 2000. 2000 International Conference on Power System Technology. Proceedings (Cat. No.00EX409) · doi:10.1109/icpst.2000.900036 · Cited by 328
Self-citationContactless Energy Transfer System With FPGA-Controlled Resonant Converter
Moradewicz, A. J., & Kazmierkowski, M. P. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2051395 · Cited by 270
A new IPT magnetic coupler for electric vehicle charging systems
Budhia, M., Covic, G., & Boys, J. (2010) · IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society · doi:10.1109/iecon.2010.5675350 · Cited by 268
Self-citationZhong, W. X., Liu, X., & Hui, S. Y. R. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2098379 · Cited by 263
Compact contactless power transfer system for electric vehicles
Nagatsuka, Y., Ehara, N., Kaneko, Y., Abe, S., & Yasuda, T. (2010) · The 2010 International Power Electronics Conference - ECCE ASIA - · doi:10.1109/ipec.2010.5543313 · Cited by 245
A contactless electrical energy transmission system
Pedder, D. A. G., Brown, A. D., & Skinner, J. A. (1999) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.744372 · Cited by 242
Multiphase Pickups for Large Lateral Tolerance Contactless Power-Transfer Systems
Elliott, G., Raabe, S., Covic, G. A., & Boys, J. T. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2031184 · Cited by 234
Self-citationStudy on intelligent battery charging using inductive transmission of power and information
Hirai, J., Kim, T.-W., & Kawamura, A. (2000) · IEEE Transactions on Power Electronics · doi:10.1109/63.838106 · Cited by 172
The design of a contact-less energy transfer system for a people mover system
Covic, G. A., Elliott, G., Stielau, O. H., Green, R. M., & Boys, J. T. (2002) · PowerCon 2000. 2000 International Conference on Power System Technology. Proceedings (Cat. No.00EX409) · doi:10.1109/icpst.2000.900035 · Cited by 165
Self-citationResonant Contactless Energy Transfer With Improved Efficiency
Valtchev, S., Borges, B. V., Brandisky, K., & Klaassens, J. B. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.2003188 · Cited by 159
Large air-gap coupler for inductive charger [for electric vehicles]
Sakamoto, H., Harada, K., Washimiya, S., Takehara, K., Matsuo, Y., & Nakao, F. (1999) · IEEE Transactions on Magnetics · doi:10.1109/20.800578 · Cited by 133
Inductive coupler for contactless power transmission
Sergeant, P., & den Bossche, A. V. (2008) · IET Electric Power Applications · doi:10.1049/iet-epa:20070059 · Cited by 122
Practical Design Considerations for Contactless Power Transfer Quadrature Pick-Ups
Raabe, S., & Covic, G. A. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2165461 · Cited by 110
Self-citationA multi-resonant converter for non-contact charging with electromagnetic coupling
Laouamer, R., Brunello, M., Ferrieux, J.-P., Normand, O., & Buchheit, N. (2002) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.1997.671998 · Cited by 90
An actively cooled 120 kW coaxial winding transformer for fast charging electric vehicles
Klontz, K. W., Divan, D. M., & Novotny, D. W. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.475695 · Cited by 59
Ferrite core couplers for inductive chargers
Nakao, F., Matsuo, Y., Kitaoka, M., & Sakamoto, H. (2003) · Power Conversion Conference · doi:10.1109/pcc.2002.997631 · Cited by 55
Electric Vehicles – Personal transportation for the future
Covic, G. A., Boys, J. T., Budhia, M., & Huang, C.-Y. (2010) · World Electric Vehicle Journal · doi:10.3390/wevj4040693 · Cited by 55
Self-citationSeverns, R. P., Yeow, E., Woody, G., Hall, J. T., & Hayes, J. G. (2002) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.1996.500418 · Cited by 54
MATSUDA, Y., Sakamoto, H., Shibuya, H., & Murata, S. (2006) · Journal of Applied Physics · doi:10.1063/1.2164408 · Cited by 16
Controlling new die mechanisms for magnetic characteristics of super-large ferrite cores
Matsuo, Y., Kondoh, O. M., & Nakao, F. (2000) · IEEE Transactions on Magnetics · doi:10.1109/20.908843 · Cited by 13
Cited by
Wireless Power Transfer for Electric Vehicle Applications
Li, S., & Mi, C. C. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2319453 · Cited by 2,185
Wireless Power Transfer—An Overview
Zhang, Z., Pang, H., Georgiadis, A., & Cecati, C. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2835378 · Cited by 1,723
A Critical Review of Recent Progress in Mid-Range Wireless Power Transfer
Hui, S. Y. R., Zhong, W., & Lee, C. K. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2249670 · Cited by 1,465
Modern Trends in Inductive Power Transfer for Transportation Applications
Covic, G. A., & Boys, J. T. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2264473 · Cited by 1,263
Self-citationCovic, G. A., & Boys, J. T. (2013) · Proceedings of the IEEE · doi:10.1109/jproc.2013.2244536 · Cited by 1,223
Self-citation
Metadata
- Authors
- Budhia, M., Boys, J. T., Covic, G. A., & Huang, C.-Y.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2013-01
- Volume
- 60
- Issue
- 1
- Pages
- 318-328
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2050928834
- Cited by
- 1,273
- References
- 26
- FWCI
- 21.39
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.