The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Development of a Single-Sided Flux Magnetic Coupler for Electric Vehicle IPT Charging Systems
Abstract
Inductive power transfer is a practical method for recharging electric vehicles because it is safe, convenient, and reliable. The performance of the magnetic couplers that transfer power determines the overall feasibility of a complete system. Circular couplers are the most common topology in the literature; however, they have fundamentally limited coupling. Their flux patterns necessarily limit the operational air gap as well as tolerance to horizontal misalignment. A new polarized coupler topology [referred to as a double D (DD)] is presented, which overcomes these difficulties. DDs provide a charge zone five times larger than that possible with circular pads for a similar material cost and are smaller. A 0.31-m2DD enables 2 kW of power transfer over an oval area measuring 540 mm × 800 mm with a 200-mm air gap. Leakage magnetic fields have been investigated and show that circular and DD couplers operating under similar power transfer conditions produce similar levels. Both topologies can be designed and operated to ensure compliance with international guidelines.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ahlbom, A. (1998) · Health Physics · Cited by 5,817
Design Considerations for a Contactless Electric Vehicle Battery Charger
Wang, C.-S., Stielau, O. H., & Covic, G. A. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.855672 · Cited by 1,487
Self-citationDesign and Optimization of Circular Magnetic Structures for Lumped Inductive Power Transfer Systems
Budhia, M., Covic, G. A., & Boys, J. T. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2143730 · Cited by 1,039
Self-citationStability and control of inductivelycoupled power transfer systems
Boys, J. T., Covic, G. A., & Green, A. W. (2000) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20000017 · Cited by 559
Self-citationHui, S. Y. R., & Ho, W. W. C. (2005) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.846550 · Cited by 501
Design of a contactless battery charger for cellular phone
Kim, C.-G., Seo, D.-H., You, J.-S., Park, J.-H., & Cho, B. H. (2001) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.969404 · Cited by 345
Design of loosely coupled inductive power transfer systems
Stielau, O. H., & Covic, G. A. (2002) · PowerCon 2000. 2000 International Conference on Power System Technology. Proceedings (Cat. No.00EX409) · doi:10.1109/icpst.2000.900036 · Cited by 328
Self-citationContactless Energy Transfer System With FPGA-Controlled Resonant Converter
Moradewicz, A. J., & Kazmierkowski, M. P. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2051395 · Cited by 270
A new IPT magnetic coupler for electric vehicle charging systems
Budhia, M., Covic, G., & Boys, J. (2010) · IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society · doi:10.1109/iecon.2010.5675350 · Cited by 268
Self-citationZhong, W. X., Liu, X., & Hui, S. Y. R. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2098379 · Cited by 263
Cited by
Wireless Power Transfer for Electric Vehicle Applications
Li, S., & Mi, C. C. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2319453 · Cited by 2,185
Wireless Power Transfer—An Overview
Zhang, Z., Pang, H., Georgiadis, A., & Cecati, C. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2835378 · Cited by 1,723
A Critical Review of Recent Progress in Mid-Range Wireless Power Transfer
Hui, S. Y. R., Zhong, W., & Lee, C. K. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2249670 · Cited by 1,465
Modern Trends in Inductive Power Transfer for Transportation Applications
Covic, G. A., & Boys, J. T. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2264473 · Cited by 1,263
Self-citationCovic, G. A., & Boys, J. T. (2013) · Proceedings of the IEEE · doi:10.1109/jproc.2013.2244536 · Cited by 1,223
Self-citationA Comprehensive Review of Wireless Charging Technologies for Electric Vehicles
Ahmad, A., Alam, M. S., & Chabaan, R. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2771619 · Cited by 993
Wireless Power Transfer for Vehicular Applications: Overview and Challenges
Patil, D., McDonough, M. K., Miller, J. M., Fahimi, B., & Balsara, P. T. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2780627 · Cited by 991
Modern Advances in Wireless Power Transfer Systems for Roadway Powered Electric Vehicles
Mi, C. C., Buja, G., Choi, S. Y., & Rim, C. T. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2574993 · Cited by 841
Advances in Wireless Power Transfer Systems for Roadway-Powered Electric Vehicles
Choi, S. Y., Gu, B. W., Jeong, S. Y., & Rim, C. T. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2343674 · Cited by 682
A review of wireless power transfer for electric vehicles: Prospects to enhance sustainable mobility
Bi, Z., Kan, T., Mi, C. C., Zhang, Y., Zhao, Z., & Keoleian, G. A. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.07.003 · Cited by 485
Vu, V.-B., Tran, D.-H., & Choi, W. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2766605 · Cited by 450
Review of static and dynamic wireless electric vehicle charging system
Panchal, C., Stegen, S., & Lu, J. (2018) · Engineering Science and Technology, an International Journal · doi:10.1016/j.jestch.2018.06.015 · Cited by 414
Comparison Study on SS and Double-Sided LCC Compensation Topologies for EV/PHEV Wireless Chargers
Li, W., Zhao, H., Deng, J., Li, S., & Mi, C. C. (2016) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2015.2479938 · Cited by 375
Zaheer, A., Hao, H., Covic, G. A., & Kacprzak, D. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2329693 · Cited by 371
Self-citationAdvances in High-Power Wireless Charging Systems: Overview and Design Considerations
Feng, H., Tavakoli, R., Onar, O. C., & Pantic, Z. (2020) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3012543 · Cited by 368
Feng, H., Cai, T., Duan, S., Zhao, J., Zhang, X., & Chen, C. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2589922 · Cited by 350
He, H., Sun, F., Wang, Z., Lin, C., Zhang, C., Xiong, R., Deng, J., Zhu, X., Xie, P., Zhang, S., et al. (2022) · Green Energy and Intelligent Transportation · doi:10.1016/j.geits.2022.100020 · Cited by 334
Li, W., Zhao, H., Li, S., Deng, J., Kan, T., & Mi, C. C. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2384003 · Cited by 331
Kan, T., Nguyen, T.-D., White, J. C., Malhan, R. K., & Mi, C. C. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2552060 · Cited by 330
Hybrid Bidirectional Wireless EV Charging System Tolerant to Pad Misalignment
Zhao, L., Thrimawithana, D. J., & Madawala, U. K. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2686301 · Cited by 328
Multi-Objective Optimization of 50 kW/85 kHz IPT System for Public Transport
Bosshard, R., & Kolar, J. W. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2598755 · Cited by 317
A critical review on wireless charging for electric vehicles
Machura, P., & Li, Q. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.01.027 · Cited by 295
A Comparative Study of Power Supply Architectures in Wireless EV Charging Systems
Esteban, B., Sid-Ahmed, M., & Kar, N. C. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2440256 · Cited by 256
Control design for optimizing efficiency in inductive power transfer systems
Huang, Z., Wong, S.-C., & Tse, C. K. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2724039 · Cited by 242
Niu, S., Niu, S., Zhang, C., & Jian, L. (2023) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2022.3150114 · Cited by 28
Tavakoli, R., & Pantic, Z. (2017) · 2017 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2017.8096493 · Cited by 21
Metadata
- Authors
- Budhia, M., Boys, J. T., Covic, G. A., & Huang, C.-Y.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2013-01
- Volume
- 60
- Issue
- 1
- Pages
- 318-328
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2050928834
- Cited by
- 1,273
- References
- 26
- FWCI
- 21.39
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.