Inter-Turn Fault Detection in PM Synchronous Machines by Physics-Based Back Electromotive Force Estimation
The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Abstract
In this paper, the inter-turn short circuit fault detection in permanent magnet synchronous machines (PMSM) using an open-loop physics-based back electromotive force (EMF) estimator is presented. The back EMF estimator is designed based upon a current mode tracking scheme. The thermal and saturation aspects of the machine are considered in the design of the estimator. The design procedure and stability criteria of the estimator are presented in detail. The fault detection is carried out based on the difference between the estimated back EMF and a reference back EMF. A 0.8 (kW) PMSM is studied experimentally as well as numerically under different inter-turn fault and operational contingencies. The numerical modeling is accomplished by a finite-element-based model coupled with the thermal network and polluted with inter-turn fault. The acceptable agreement between the simulated and experimental result validates the modeling process. The back EMF estimator fault detection system is led to discriminative inter-turn fault signatures in a fraction of second for wide speed range even in the presence of harmonic loads and dynamic eccentricities.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
A review of induction motors signature analysis as a medium for faults detection
El Hachemi Benbouzid, M. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873206 · Cited by 1,602
EL-Refaie, A. M. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2030211 · Cited by 1,373 · cited 1×
“The winding’s coils are physically separated, and therefore the shorted turns contact is limited to faulty coil [2].”
BackgroundRecent Advances in Modeling and Online Detection of Stator Interturn Faults in Electrical Motors
Gandhi, A., Corrigan, T., & Parsa, L. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2089937 · Cited by 544 · cited 4×
“In recent literature [7, 20]–[28], the extraction of fault features from different signals in both induction and PM machines is typically satisfied.”
BackgroundInfluentialCruz, S. M. A., & Cardoso, A. J. M. (2001) · IEEE Transactions on Industry Applications · doi:10.1109/28.952496 · Cited by 464
Static-, Dynamic-, and Mixed-Eccentricity Fault Diagnoses in Permanent-Magnet Synchronous Motors
Ebrahimi, B. M., Faiz, J., & Roshtkhari, M. J. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2029577 · Cited by 386 · cited 1×
“the accuracy of most frequency analyses-based methods [16],”
Henao, H., Demian, C., & Capolino, G.-A. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.816531 · Cited by 361 · cited 1×
“However, redundancy in fault detection systems by adding search coil, [21], the need for additional measurement system [22], underestimation of fault and nonsinusoidal armature flux linkage harmonics as well as the adverse effect of unbalance in the supply voltage [23], underestimation of non-stationary behavior of fa…”
BackgroundA new approach to on-line turn fault detection in AC motors
Kliman, G. B., Premerlani, W. J., Koegl, R. A., & Hoeweler, D. (2002) · IAS '96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting · doi:10.1109/ias.1996.557113 · Cited by 303
Linear Feedback Control - Analysis and Design with MATLAB (by Dingyu Xue et al; 2007) [Bookshelf]
(2009) · IEEE Control Systems · doi:10.1109/mcs.2008.930839 · Cited by 291
Cruz, S. M. A., & Marques Cardoso, A. J. (2002) · Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129) · doi:10.1109/ias.2000.881141 · Cited by 258 · cited 1×
“Most of the techniques deliberate inter-turn fault studies in utility-driven motor applications and only a few turn fault detection methods for motor-drive applications [11], [13].”
BackgroundLee, S. B., Tallam, R. M., & Habetler, T. G. (2003) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.810848 · Cited by 248
Research works printed but not linked: 2
- xue, 2009, Linear Feedback Control Analysis and Design with Matlab, 92
- 10.1109/41.873206 · DOI · Paper page
Cited by
Items 101–178 of 178
Yuan, Q., Zafarani, M., & Akin, B. (2016) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2016.7854673 · Cited by 7
“Similar to MCSA method, the back EMF is also analyzed in frequency domain for inter turn short circuit fault detection, [13].”
MethodShih, K., Ngo, D., Huang, S., & Hsieh, M. (2025) · IET Electric Power Applications · doi:10.1049/elp2.70081 · Cited by 6
Tian, B., Lu, R., & Wang, K. (2023) · Journal of Power Electronics · doi:10.1007/s43236-023-00642-y · Cited by 6
“In addition to using the current signature, parameter-based fault diagnosis has also been investigated [19, 20].”
MethodA strategy for interturn short-circuit fault detection in PMSM with partitioned stator windings
Mazzoletti, M. A., Bossio, G. R., & Angelo, C. H. D. (2017) · Workshop on Information Processing and Control · doi:10.23919/rpic.2017.8214325 · Cited by 6
Park, J.-K., Seo, I.-M., & Hur, J. (2013) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2013.6647025 · Cited by 6
“The fr are verified using the FFT function of the os Figure.”
BackgroundMethodInfluentialAlternator Rotor Inter-turn Short-Circuit Identification using FEM Based Learning
Bacchus, A., Biet, M., Macaire, L., Tounzi, A., & Menach, Y. L. (2015) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2015.09.726 · Cited by 6
Palavicino, P. C., & Sarlioglu, B. (2020) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec48692.2020.9161715 · Cited by 7
“Many authors have studied dynamic models for electric machines with ISC, [3]–[12], where the dynamic equations of the ISC are solved.”
BackgroundImpact of stator interturn short circuit fault on shaft voltage in a synchronous generator
He, Y., Yang, P., Sun, K. H., Xu, Z., Wang, H., He, X., & Gerada, D. (2022) · IET Electric Power Applications · doi:10.1049/elp2.12271 · Cited by 5
A New Method to Estimate the Severity of Interturn Short-Circuit Fault for PMSM
Zeng, Z., Zhang, M., Chen, L., Huang, Q., & Sun, D. (2022) · International Conference on Power Systems and Electrical Technology (PSET) · doi:10.1109/pset56192.2022.10100348 · Cited by 5
“In [16], It completes fault diagnosis by comparing the estimated value of the back EMF with the reference value.”
BackgroundChai, X., Wang, D., Song, K., Ni, Y., Li, Y., & Sun, G. (2023) · International Conference on Renewable Energy and Power Engineering (REPE) · doi:10.1109/repe59476.2023.10511548 · Cited by 6
“…turn short circuit faults mainly include negative sequence current analysis, parameter estimation, Park transform, motor current feature analysis, etc. [2-3], among which the current signal feature analysis method is the most widely used, which detects harmonic components to determine faults [3-6].”
MethodChen, C., Lin, C.-J., Yang, F.-J., & Lin, F. (2024) · Applied Sciences · doi:10.3390/app14209570 · Cited by 6
Fault Diagnosis of Inter-turn Short Circuit Faults in Dual Three-Phase PMSM Drives
He, Z., Wang, Z., Duan, C., & Wang, X. (2021) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/sdemped51010.2021.9605518 · Cited by 8
Inter‐turn short‐circuit assessment of DC motor used in railway locomotive
Ray, D. K., Chattopadhyay, S., Sharma, K. D., & Sengupta, S. (2018) · IET Electric Power Applications · doi:10.1049/iet-epa.2018.0047 · Cited by 5
Design of Aviation High Impedance Permanent Magnet Synchronous Generator
Wu, S. D., Chen, Q., Li, Q., Liu, X., Zhang, H., & Lin, L. (2021) · Mathematical Problems in Engineering · doi:10.1155/2021/6667877 · Cited by 5
Pan, T., Li, Q., Fan, T., Wen, X., Zhao, S., Sun, C., Liao, W., & Huang, S. H. (2025) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2025.3604910 · Cited by 4
“ISCF can also be diagnosed through the intermediate variables of control algorithms [26], [27], estimation of back electromotive force (EMF) [28], [29], and high-frequency signal injections [30].”
Jarosz, J. J., Skowron, M., Frankiewicz, O., Wolkiewicz, M., Weisse, S., Valire, J., & Szabat, K. (2025) · Electronics · doi:10.3390/electronics14122373 · Cited by 4
A Multi-Task Causal Knowledge Fault Diagnosis Method for PMSM-ITSF Based on Meta-Learning
Lan, P., Yao, L., Lu, Y., & Zhang, T. (2025) · Sensors · doi:10.3390/s25041271 · Cited by 4
“Reference [11] proposes a BEMF estimation method for real-time identification of ITSF faults by back electromotive force under non-stationary and nonlinear states [12].”
Reliability assessment of adjustable speed drives using state Markov models
Brînzei, N., & Nahid‐Mobarakeh, B. (2014) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.2014.6978419 · Cited by 5
“At low speeds, the fault current decreases [14] reducing the braking torque.”
BackgroundSensing of Heat Source in a Deep Layer by Considering Heat Propagation
Osawa, Y., & Katsura, S. (2018) · IEEJ Journal of Industry Applications · doi:10.1541/ieejjia.7.229 · Cited by 5
EM-Thermal Coupled Simulation Under Various Fault Conditions of a Triple Redundant 9-Phase PMASynRM
Shi, Y., Wang, J., & Wang, B. (2018) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2018.8558200 · Cited by 4
“Usually, losses obtained from electromagnetic (EM) model are simply fed to a lumped parameter (LP) thermal model [1, 2] or commercial tools to obtain the temperature distribution.”
MethodRigatos, G. G., Zervos, N., Abbaszadeh, M., Siano, P., Serpanos, D. N., & Siadimas, V. (2020) · International Journal of Systems Science · doi:10.1080/00207721.2020.1792579 · Cited by 4
Amirouche, E., Iffouzar, K., Houari, A., Ghedamsi, K., & Aouzellag, D. (2022) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-021-06445-2 · Cited by 4
“Many diagnostic and severity estimation technics are reported in the literature, based on machine current signature analysis (MCSA) [7, 8], zero sequence voltage component (ZSVC) analysis [9, 10], parameters estimation [11, 12], machine model [13], search coil [14], and high-frequency signal injection [15].”
BackgroundKadavelugu, A., Bhattacharya, S., Ryu, S., Grider, D. E., Agarwal, A., & Leslie, S. G. (2013) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2013.6647026 · Cited by 4
Pietrzak, P., Wolkiewicz, M., & Kotarski, J. (2024) · Electronics · doi:10.3390/electronics13152975 · Cited by 3
Hang, J., Wang, X., Tian, Z., Fang, J., & Ding, S. (2025) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2025.3565499 · Cited by 4
“…stator current Park’s vector [12], voltage signal [8], the components of the sequence impedance matrix [13], high-frequency signal injection [14], searching coil [15], parameter estimation [16], power signal [7], electromagnetic torque [17], and machine current signature analysis (MCSA) [18], [19].”
Palavicino, C., & Sarlioglu, B. (2022) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2022.3172236 · Cited by 4
Wearable Thermal Interface for Sharing Palm Heat Conduction
Osawa, Y., & Katsura, S. (2018) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2018.8591352 · Cited by 3
“Model of Heat Flow Through the Thermal Interface The thermal behavior of the thermal interface is modeled based on the thermal network method [37], [38].”
MethodFico, V. M., Martín-Prats, M. A., & Ierardi, C. (2020) · Energies · doi:10.3390/en13071573 · Cited by 3
“[9] Y Y P Y 3 Journal [10] Y P Y Y 12 Journal [11] Y Y Y Y 5 Journal [12] Y P Y P 1 Journal [1] Y Y Y Y 3 Journal [13] Y Y P P 1 Journal [14] Y Y Y Y 2 Conference [15] P Y Y P 1 Conference [16] Y Y Y Y 1 Journal [17] Y Y P P 0 Conference [18] Y P P P 0 Conference [19] Y P Y Y 1 Conference [20] Y Y Y Y 13 Journal [21]…”
MethodYang, J., Wang, Y., Zhang, W., Dai, Z., Zhang, Z., & Xiangli, K. (2020) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/ipemc-ecceasia48364.2020.9367859 · Cited by 3
“And the commonest short circuit fault in PMSM is the stator winding inter-turn short circuit (ITSC) fault [9]-[11].”
BackgroundAnalysis and Diagnosis of ITSC in Dual Rotor Air-Cored PMSG - Parallel Connected Stator Coils
Gkiolekas, N., Sergakis, A., Mueller, M., & Gyftakis, K. N. (2025) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/sdemped53223.2025.11154141 · Cited by 3
“Some other methods, such as stray flux monitoring [10], physics-based back electromotive force (EMF) estimation [11], and PWM voltage-based modeling [12], have been investigated.”
Palavicino, P. C., Lee, W., & Sarlioglu, B. (2020) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce44975.2020.9235775 · Cited by 3
“Physics-based back-emf tracking for ISC diagnostics has been reported in [8]–[10].”
Palavicino, P. C., & Sarlioglu, B. (2021) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/sdemped51010.2021.9605537 · Cited by 3
Vibro-acoustic behaviour of an induction machine with stator inter-turn short-circuit
Jelassi, S., Romary, R., & Brudny, J. F. (2016) · The European Physical Journal Applied Physics · doi:10.1051/epjap/2015150279 · Cited by 3
Shi, Y., Wang, J., & Wang, B. (2018) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2018.8557727 · Cited by 3
“A thermal network is used in [8] for an inter-turn short circuit (SC) fault detection in permanent magnet synchronous machine (PMSM).”
MethodZhang, Y., Wang, A., Guo, B., & Li, H. (2019) · International Conference on Systems and Informatics (ICSAI) · doi:10.1109/icsai48974.2019.9010126 · Cited by 3
“In reference [7], a back emf estimation algorithm is used to detect inter-turn shortcircuit stoppage of permanent magnet motor.”
MethodKang, D.-H., Kim, H.-K., Park, J.-K., Hyun, S.-H., & Hur, J. (2016) · Journal of Power Electronics · doi:10.6113/jpe.2016.16.1.48 · Cited by 2
Sergakis, A., Gkiolekas, N., Mueller, M. A., & Gyftakis, K. N. (2025) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/sdemped53223.2025.11154265 · Cited by 3
“Moderate techniques such as dq-axis current harmonic analysis [12] - [14], flux monitoring [15], and back-electromotive force estimation [16] are capable of providing improved diagnostic capabilities.”
Rao, Y., Wang, W., Fu, J., Zheng, Z., Hua, W., & Cheng, M. (2025) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2025.3614689 · Cited by 2
“Notethatthemethods in[11],[12],[13],[14],[15],[16],and[17]stilldependonthe fundamentalsignals,andtheycannotcompletelyeliminatethe affectionofthespeedandloadvariations.”
Distributed thermal conductance control for sensing and rendering thermal sensation on the palm
Osawa, Y., & Katsura, S. (2018) · IEEE International Workshop on Advanced Motion Control (AMC) · doi:10.1109/amc.2019.8371112 · Cited by 2
“Model of the Peltier Device In this section, thermal system is modeled by using thermal network method [17], [18].”
MethodLi, R., Wang, K., Zeng, P., & Cao, J. (2023) · International Conference on System Reliability and Safety Engineering (SRSE) · doi:10.1109/srse59585.2023.10336087 · Cited by 2
“[16] Su established the mathematical model of permanent magnet synchronous motor stator turn-to-turn short circuit, proposed a simulation model based on PMSM control system, and performed simulation calculations with Matlab/Simulink, and determined the occurrence of faults from the effective value…”
MethodZhou, Q. G., Hu, W., Wang, T., & Chu, F. (2024) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2024.3368160 · Cited by 4
“…models have been widely applied, and some variants were used to assist in the development of fault diagnosis techniques, such as analyzing and detecting the characteristics of current [14], [15], [16], [17] or voltage [18], [19], [20], and using external-excited [21], [22], [23] approaches.”
MethodTemperature control on a curved surface for implementing to wearable interfaces
Osawa, Y., & Katsura, S. (2016) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2016.7793865 · Cited by 3
“The copper plate is modeled by a thermal network method [20], [21], shown in Fig.”
MethodInter-turn short-circuit fault detection in the vectorial control PMSM drive
Sdiri, F., Bensalem, Y., Trabelsi, H., & Abdelkrim, M. N. (2017) · International Conference on Sciences and Techniques of Automatic Control and Computer Engineering · doi:10.1109/sta.2017.8314960 · Cited by 2
“In [2] an estimated electromotive force has been used to detect the mentioned fault in PMSM.”
MethodQiu, H., Hu, K., Yu, W., Tang, B., Wang, W., & Yang, C. (2018) · Electric Power Components and Systems · doi:10.1080/15325008.2018.1484824 · Cited by 2
“On-line and off-line detection methods were integrated into the diagnostic strategy to optimize diagnostic performance based on work cycle of an electric vehicles [6].”
MethodDetection of PMSM Inter-Turn Short-Circuit Based on a Fault-Related Disturbance Observer
Ilioudis, V. C. (2020) · International Journal of Simulation Systems Science & Technology · doi:10.5013/ijssst.a.21.02.31 · Cited by 2
“In addition, estimation techniques have been applied to obtain fault information by means of adaptive PMSM observers [8].”
MethodShi, Y., Wang, J., Hu, R., & Wang, B. (2019) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2019.8912582 · Cited by 2
“Many published papers have studied machine performance under ideal SC fault conditions assuming that the electric resistance of the insulation becomes zero [2-4].”
BackgroundFault mitigation in permanent magnet synchronous motors under an internal turn-to-turn failure
Cintron-Rivera, J. G. (2014) · Michigan State University Libraries · doi:10.25335/5wne-5c11 · Cited by 2
A Fault Tolerant Electric Propulsion Unit Based on Bifilar Coils
Yirisaw, T. L., Reeh, A., Birkmayer, W., & Burkhardt, Y. (2024) · International Conference on Electrical Machines (ICEM) · doi:10.1109/icem60801.2024.10700510 · Cited by 1
“The detection methods can be generally divided in to various categories: • Methods based on an electric machine model [7], [8] • Methods based on stator winding current spectrum [9], [10] • Methods based on search coils [11]–[13] • Methods based on high frequency injection [14] • Methods based on…”
Rao, Y., Fu, J., Cui, P., Zheng, Z., & Wang, W. (2024) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.23919/icems60997.2024.10921083 · Cited by 1
“In [14], ISCF detection is performed based on the average differences between the finite-element model estimated and a reference EMF.”
Sun, Y., Wang, K., Xu, A., Guan, B., Li, R., Zhang, B., & Zhou, X. (2023) · Entropy · doi:10.3390/e25091354 · Cited by 1
“…(MCSA) [4,5], negative-sequence-current-component-based methods [6], Park’s vector-based methods [7], and motor magnetic field signals-based methods [8,9], etc. Deep learning methods have also been used for turn-to-turn short circuit fault detection, including convolutional neural network-based…”
MethodAnalysis of the short-circuit fault characteristics of permanent magnet synchronous machines
Zhang, C., Luo, L., He, J., & Liu, N. (2015) · Chinese Automation Congress · doi:10.1109/cac.2015.7382816 · Cited by 2
“Previous studies have analysed the demagnetisation of mag nets, and their works can be classified into the following categories: temperature, mechanical shock, chemical demag netisation, aging of the magnet itself, and others [6-10].”
BackgroundMultiple temperature control with detection of contacting points for rendering thermal sensation
Osawa, Y., & Katsura, S. (2015) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2015.7392842 · Cited by 1
“The thermal system is modeled with an infinite nodes by using thermal network method [17].”
MethodTemperature control for thermal sensation based on thermal diffusion equation
Osawa, Y., & Katsura, S. (2016) · IEEE International Symposium on Industrial Electronics (ISIE) · doi:10.1109/isie.2016.7745076 · Cited by 1
“The system is modeled by using a thermal network method [20], [21] with an arbitrary number elements.”
MethodDeng, W.-Q., He, Y., Tang, G., Meng, Y., & Zhong, H. (2016) · International Conference on Advanced Electronic Science and Technology (AEST) · doi:10.2991/aest-16.2016.66 · Cited by 1
“Ref.[5] analyzes the electromotive force characteristic of stator armature under the inter-turn short circuit fault detection in permanent magnet synchronous machines (PMSM) to determine the degree and location of the fault.”
BackgroundStudy of winding inter turn short circuit effect on permanent magnet synchronous motor performance
Liu, Z., Sun, J., He, Y.-L., Gao, H.-B., Sheng, C.-X., & Xu, X.-B. (2019) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/354/1/012003 · Cited by 1
Thermal Rendering Based on Thermal Diffusion Equation
Osawa, Y., & Katsura, S. (2019) · IEEJ Journal of Industry Applications · doi:10.1541/ieejjia.8.867 · Cited by 1
Study of Copper Loss by Inter Turn short fault of Interior Permanent Magnet Synchronous Motor
Im, S.-H., & Gu, B.-G. (2019) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2019.8912515 · Cited by 1
Shi, Y., Wang, J., & Wang, B. (2020) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce44975.2020.9236372 · Cited by 1
Li, T., Du, B., Huang, W., Zhang, W., Wu, S., & Cui, S. (2021) · IEEE Conference on Industrial Electronics and Applications (ICIEA) · doi:10.1109/iciea51954.2021.9516183 · Cited by 1
2013 Index IEEE Transactions on Industrial Electronics Vol. 60
(2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2281744 · Cited by 1
Bolvashenkov, I., Kammermann, J., Lahlou, T., Herzog, H., & Viatkin, A. (2018) · AEIT International Annual Conference · doi:10.23919/aeit.2018.8577433
Rendering Thermal Sensation of Fingertip by Using Spatial Information of Heat Sources
Osawa, Y., & Katsura, S. (2019) · IEEE/SICE International Symposium on System Integration (SII) · doi:10.1109/sii.2019.8700450
“The model based on a thermal network method [22], [23] is shown in Fig.”
MethodFCS-MPC Based Fault Tolerant Control for Permanent Magnet Synchronous Machines
Catuogno, G. R., Kiselev, A., Frias, R. G., Kuznietsov, A., García, G. O., & Leidhold, R. (2020) · IEEE Congreso Bienal de Argentina (ARGENCON) · doi:10.1109/argencon49523.2020.9505496
“[8,9] y en los sensores de medición [10].”
BackgroundNew control strategy for permanent magnet synchronous generator (PMSG) wind turbine
Mozayan, S. M. (2020) · Espace ÉTS (ETS)
Tian, X., Guo, H. H., & Xu, J. (2022) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.1109/icems56177.2022.9983309
Fault detection and fault tole rant control of interturn short circuit of double redundancy motor
Jin, T., Tian, W., & Zhao, W. (2023) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2522/1/012024
Bosson, S. P., Janouš, Š., Frank, Z., & Peroutka, Z. (2023) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon51785.2023.10311917
“A back electromotive force (BEMF) estimator developed on the basis of a mathematical model taking into account the influence of temperature and magnetic saturation is used to detect ITSC in [7].”
MethodIntroduction to Fault‐Tolerant Machine Drives
Wang, B., & Wang, J. (2024) · Wiley eBooks · doi:10.1002/9781394252046.ch1
Fault Detection Techniques for the Multiple 3‐Phase Machine Drive
Wang, B., & Wang, J. (2024) · Wiley eBooks · doi:10.1002/9781394252046.ch5
Applications of Parameter Estimation
Zhu, Z. Q., Liu, K., & Liang, D. (2025) · Wiley eBooks · doi:10.1002/9781394280452.ch11
Xue, Q., Liu, J., & Chen, N. (2025) · Chinese Control Conference (CCC) · doi:10.23919/ccc64809.2025.11178409
Lei, Z., Wu, X., Yu, X., Wu, T., & Wang, W. (2025) · IEEE International Symposium on Sensorless Control for Electrical Drives (SLED) · doi:10.1109/sled63792.2025.11154683
Line current analysis as a technique to detect bearing faults in permanent magnet synchronous motors
Ferradj, M., & Benouzza, N. (2025) · International Conference on Applied Automation and Industrial Diagnostics (ICAAID) · doi:10.1109/icaaid68975.2025.11358304
A Fault Tolerant Electric Drive Based on Bifilar Coils Wound Machine
Yirisaw, T. L., Reeh, A., Birkmayer, W., & Burkhardt, Y. (2026) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2026.3673214 · Cited by 1
“2) Methods comparing the outputs of machine models derived from physical first principles using measured and ideal signal inputs [22], [28], [29], [30], [31].”
Permeance Network Modeling of IPMSM Considering Outer-Race Bearing Defect
Chaudhuri, S. P., Routray, A., & Mukhopadhyay, S. (2025) · National Power Electronics Conference (NPEC) · doi:10.1109/npec66512.2025.11450188
“A major contributing factor to the difficulty in detection of bearing faults in IPMSM using MCSA is the complex physical construction and magnetic material used in IPMSM [6].”
Huang, S., Sun, T., Su, J., Uddin, Z., Niu, F., & Ullah, B. (2026) · International Conference on Robotics and Automation in Industry (ICRAI) · doi:10.1109/icrai70912.2026.11551952
“Model-based methods utilize analytical machine models and state observers to construct residuals or fault indicators for online diagnosis [9] – [11].”
Lee, J., Park, S., Lee, Y., & Kim, N. (2026) · Computer Modeling in Engineering & Sciences · doi:10.32604/cmes.2026.083185 · Cited by 1
(2026) · Wiley eBooks · doi:10.1002/9781394425006.ch08
Metadata
- Authors
- Sarikhani, A., & Mohammed, O. A.
- Affiliations
- Florida International University (US)
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2013-08
- Volume
- 60
- Issue
- 8
- Pages
- 3472-3484
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2080850924
- Cited by
- 177
- References
- 41
- Citations by year
- 2026: 3 · 2025: 16 · 2024: 14 · 2023: 16 · 2022: 12 · 2021: 13 · 2020: 14 · 2019: 14 · 2018: 18 · 2017: 9 · 2016: 14 · 2015: 14 · 2014: 15 · 2013: 5
- FWCI
- 6.95
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Industrial Electronics (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Motor Design and Analysis
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Sensorless Control of Electric Motors
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Keywords
- permanent magnet synchronous motor, back electromotive force estimation, open-loop estimation, thermal modeling, magnetic saturation, estimator stability, fault signatures, dynamic eccentricity, harmonic loading
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.