Design and Performance Evaluation of Overcurrent Protection Schemes for Silicon Carbide (SiC) Power MOSFETs
The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Abstract
Overcurrent protection of silicon carbide (SiC) metal–oxide–semiconductor field-effect transistors (MOSFETs) remains a challenge due to lack of practical knowledge. This paper presents three overcurrent protection methods to improve the reliability and overall cost of SiC MOSFET-based converters. First, a solid-state circuit breaker (SSCB) composed primarily by a Si IGBT and a commercial gate driver IC is connected in series with the dc bus to detect and clear overcurrent faults. Second, the desaturation technique using a sensing diode to detect the drain-source voltage under overcurrent faults is implemented as well. Third, a novel active overcurrent protection scheme through dynamic evaluation of fault current level is proposed. The design considerations and potential issues of the protection methods are described and analyzed in detail. A phase-leg configuration-based step-down converter is built to evaluate the performance of the protection schemes under various conditions, considering variation of fault type, decoupling capacitance, protection circuit parameters, etc. Finally, a comparison is made in terms of fault response time, temperature-dependent characteristics, and applications to help designers select a proper protection method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biela, J., Schweizer, M., Waffler, S., & Kolar, J. W. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2072896 · Cited by 892
Silicon Carbide Power Transistors: A New Era in Power Electronics Is Initiated
Rabkowski, J., Peftitsis, D., & Nee, H. (2012) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2012.2193291 · Cited by 422
Time Dependence of Bias-Stress-Induced SiC MOSFET Threshold-Voltage Instability Measurements
Lelis, A. J., Habersat, D., Green, R., Ogunniyi, A., Gurfinkel, M., Suehle, J., & Goldsman, N. (2008) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2008.926672 · Cited by 326
A discussion on IGBT short-circuit behavior and fault protection schemes
Chokhawala, R. S., Catt, J., & Kiraly, L. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.370271 · Cited by 280
Reliability Issues of SiC MOSFETs: A Technology for High-Temperature Environments
Yu, L. C., Dunne, G. T., Matocha, K. S., Cheung, K. P., Suehle, J. S., & Sheng, K. (2010) · IEEE Transactions on Device and Materials Reliability · doi:10.1109/tdmr.2010.2077295 · Cited by 227
Improving SiC JFET Switching Behavior Under Influence of Circuit Parasitics
Josifovic, I., Popovic-Gerber, J., & Ferreira, J. A. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2185951 · Cited by 220
Zhang, H., & Tolbert, L. M. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2048292 · Cited by 200
Self-citationInvestigation of Conducted EMI in SiC JFET Inverters Using Separated Heat Sinks
Gong, X., & Ferreira, J. A. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2240636 · Cited by 131
Short-circuit capability of 1200V SiC MOSFET and JFET for fault protection
Huang, X., Wang, G., Li, Y., Huang, A. Q., & Baliga, B. J. (2013) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2013.6520207 · Cited by 131
Reliability of SiC MOS devices
Singh, R., & Hefner, A. R. (2004) · Solid-State Electronics · doi:10.1016/j.sse.2004.05.005 · Cited by 131
Cited by
A Review of Solid-State Circuit Breakers
Rodrigues, R., Du, Y., Antoniazzi, A., & Cairoli, P. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2020.3003358 · Cited by 456
Wide Bandgap Devices in AC Electric Drives: Opportunities and Challenges
Morya, A. K., Gardner, M. C., Anvari, B., Liu, L., Yepes, A. G., Doval-Gandoy, J., & Toliyat, H. A. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2019.2892807 · Cited by 444
“Three overcurrent protection methods, capable of clearing a short-circuit fault within 200 ns, are presented in [151].”
MethodWen, J., Zhao, D., & Zhang, C. (2020) · Renewable Energy · doi:10.1016/j.renene.2020.09.055 · Cited by 422
Automotive Traction Inverters: Current Status and Future Trends
Reimers, J., Dorn-Gomba, L., Mak, C., & Emadi, A. (2019) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2019.2897899 · Cited by 375
A Comprehensive Study of Short-Circuit Ruggedness of Silicon Carbide Power MOSFETs
Romano, G., Fayyaz, A., Riccio, M., Maresca, L., Breglio, G., Castellazzi, A., & Irace, A. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2563220 · Cited by 270
Temperature-Dependent Short-Circuit Capability of Silicon Carbide Power MOSFETs
Wang, Z., Shi, X., Tolbert, L. M., Wang, F., Liang, Z., Costinett, D., & Blalock, B. J. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2416358 · Cited by 266
Self-citationOverview of Silicon Carbide Technology: Device, Converter, System, and Application
Wang, F. (., & Zhang, Z. (2016) · CPSS Transactions on Power Electronics and Applications · doi:10.24295/cpsstpea.2016.00003 · Cited by 204
Self-citationZhao, B., Song, Q., & Liu, W. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2350459 · Cited by 143
Advances in Power Conversion and Drives for Shipboard Systems
Wang, F., Zhang, Z., Ericsen, T., Raju, R., Burgos, R., & Boroyevich, D. (2015) · Proceedings of the IEEE · doi:10.1109/jproc.2015.2495331 · Cited by 135
Self-citationZeng, Z., Zhang, X., & Li, X. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2900497 · Cited by 97
A Digital Signal Processing Based Detection Circuit for Short-Circuit Protection of SiC MOSFET
Lee, S., Kim, K., Shim, M., & Nam, I. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3091679 · Cited by 24
Yang, X., Liu, J., Wang, B., & Zhang, G. (2022) · 2022 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec43599.2022.9773378 · Cited by 18
Kanale, A., & Baliga, B. J. (2019) · IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society · doi:10.1109/iecon.2019.8926781 · Cited by 14
“Furthermore, SC overcurrent protection schemes for SiC devices in power converters involve complex circuits [5, 6] with fast responding gate drivers to detect the SC condition and subsequently turnoff the gate drive.”
Background
Metadata
- Authors
- Wang, Z., Shi, X., Xue, Y., Tolbert, L. M., Wang, F., & Blalock, B. J.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2014-10
- Volume
- 61
- Issue
- 10
- Pages
- 5570-5581
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W1967738299
- Cited by
- 269
- References
- 16
- FWCI
- 9.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.