The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Electric Vehicle Charging Station Using a Neutral Point Clamped Converter With Bipolar DC Bus
Open accessAbstract
This paper proposes a novel architecture for plug-in electric vehicles (PEVs) dc charging station at the megawatt level, through the use of a grid-tied neutral point clamped (NPC) converter. The proposed bipolar dc structure reduces the step-down effort on the dc-dc fast chargers. In addition, this paper proposes a balancing mechanism that allows handling any difference on the dc loads while keeping the midpoint voltage accurately regulated. By formally defining the unbalance operation limit, the proposed control scheme is able to provide complementary balancing capabilities by the use of an additional NPC leg acting as a bidirectional dc-dc stage, simulating the minimal load condition and allowing the modulator to keep the control on the dc voltages under any load scenario. The proposed solution enables fast charging for PEVs concentrating several charging units into a central grid-tied converter. In this paper, simulation and experimental results are presented to validate the proposed charging station architecture.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recent Advances and Industrial Applications of Multilevel Converters
Kouro, S., Malinowski, M., Gopakumar, K., Pou, J., Franquelo, L. G., Wu, B., Rodriguez, J., Pérez, M. A., & Leon, J. I. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2049719 · Cited by 3,872
Self-citationYilmaz, M., & Krein, P. T. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2212917 · Cited by 3,118
Multilevel Voltage-Source-Converter Topologies for Industrial Medium-Voltage Drives
Rodriguez, J., Bernet, S., Wu, B., Pontt, J. O., & Kouro, S. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.907044 · Cited by 2,385
Self-citationA Survey on Neutral-Point-Clamped Inverters
Rodriguez, J., Bernet, S., Steimer, P. K., & Lizama, I. E. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2032430 · Cited by 1,813
High‐Power Converters and ac Drives
Wu, B. (2006) · Wiley eBooks · doi:10.1002/0471773719 · Cited by 1,640
Self-citationLow-Voltage Bipolar-Type DC Microgrid for Super High Quality Distribution
Kakigano, H., Miura, Y., & Ise, T. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2077682 · Cited by 995
Celanovic, N., & Boroyevich, D. (2000) · IEEE Transactions on Power Electronics · doi:10.1109/63.838096 · Cited by 915
DC microgrid based distribution power generation system
Ito, Y., Yang, Z., & Akagi, H. (2004) · International Power Electronics and Motion Control Conference · Cited by 383
Powering the Future of Industry: High-Power Adjustable Speed Drive Topologies
Kouro, S., Rodriguez, J., Wu, B., Bernet, S., & Perez, M. (2012) · IEEE Industry Applications Magazine · doi:10.1109/mias.2012.2192231 · Cited by 332
Self-citationDu, Y., Zhou, X., Bai, S., Lukic, S., & Huang, A. (2010) · 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2010.5433359 · Cited by 314
Ultra-fast DC-charge infrastructures for EV-mobility and future smart grids
Aggeler, D., Canales, F., Zelaya-De La Parra, H., Coccia, A., Butcher, N., & Apeldoorn, O. (2010) · 2010 IEEE PES Innovative Smart Grid Technologies Conference Europe (ISGT Europe) · doi:10.1109/isgteurope.2010.5638899 · Cited by 274
Dickerman, L., & Harrison, J. (2010) · IEEE Power and Energy Magazine · doi:10.1109/mpe.2009.935553 · Cited by 231
Akagi, H., Fujita, H., Yonetani, S., & Kondo, Y. (2008) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2008.916713 · Cited by 192
Ma, K., & Blaabjerg, F. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2254099 · Cited by 172
Design and Control Methodology of Plug-in Hybrid Electric Vehicles
Gao, Y., & Ehsani, M. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2027918 · Cited by 172
Unified Active Filter and Energy Storage System for an MW Electric Vehicle Charging Station
Bai, S., & Lukic, S. M. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2245146 · Cited by 156
Design and control methodology of plug-in hybrid electric vehicles
Gao, Y., & Ehsani, M. (2008) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2008.4677774 · Cited by 133
Busquets‐Monge, S., Ortega, J. D., Bordonau, J., Beristáin, J., & Rocabert, J. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.918646 · Cited by 107
Rivera, S., Wu, B., Wang, J., Athab, H. S., & Kouro, S. (2013) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2013.6700158 · Cited by 26
Self-citation
Cited by
DC Microgrids—Part II: A Review of Power Architectures, Applications, and Standardization Issues
Dragicevic, T., Lu, X., Vasquez, J. C., & Guerrero, J. M. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2464277 · Cited by 1,451
Extreme Fast Charging of Electric Vehicles: A Technology Overview
Tu, H., Feng, H., Srdic, S., & Lukic, S. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2019.2958709 · Cited by 898
Safayatullah, M., Elrais, M. T., Ghosh, S., Rezaii, R., & Batarseh, I. (2022) · IEEE Access · doi:10.1109/access.2022.3166935 · Cited by 615
Acharige, S. S. G., Haque, M. E., Arif, M. T., Hosseinzadeh, N., Hasan, K. N., & Oo, A. M. T. (2023) · IEEE Access · doi:10.1109/access.2023.3267164 · Cited by 590
Guo, S., & Zhao, H. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.08.082 · Cited by 464
Metadata
- Authors
- Rivera, S., Wu, B., Kouro, S., Yaramasu, V., & Wang, J.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2015-04
- Volume
- 62
- Issue
- 4
- Pages
- 1999-2009
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2154396651
- Cited by
- 305
- References
- 19
- FWCI
- 9.02
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.