The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Electric Vehicle Charging Station Using a Neutral Point Clamped Converter With Bipolar DC Bus
Open accessAbstract
This paper proposes a novel architecture for plug-in electric vehicles (PEVs) dc charging station at the megawatt level, through the use of a grid-tied neutral point clamped (NPC) converter. The proposed bipolar dc structure reduces the step-down effort on the dc-dc fast chargers. In addition, this paper proposes a balancing mechanism that allows handling any difference on the dc loads while keeping the midpoint voltage accurately regulated. By formally defining the unbalance operation limit, the proposed control scheme is able to provide complementary balancing capabilities by the use of an additional NPC leg acting as a bidirectional dc-dc stage, simulating the minimal load condition and allowing the modulator to keep the control on the dc voltages under any load scenario. The proposed solution enables fast charging for PEVs concentrating several charging units into a central grid-tied converter. In this paper, simulation and experimental results are presented to validate the proposed charging station architecture.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recent Advances and Industrial Applications of Multilevel Converters
Kouro, S., Malinowski, M., Gopakumar, K., Pou, J., Franquelo, L. G., Wu, B., Rodriguez, J., Pérez, M. A., & Leon, J. I. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2049719 · Cited by 3,872
Self-citationYilmaz, M., & Krein, P. T. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2212917 · Cited by 3,118
Multilevel Voltage-Source-Converter Topologies for Industrial Medium-Voltage Drives
Rodriguez, J., Bernet, S., Wu, B., Pontt, J. O., & Kouro, S. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.907044 · Cited by 2,385
Self-citationA Survey on Neutral-Point-Clamped Inverters
Rodriguez, J., Bernet, S., Steimer, P. K., & Lizama, I. E. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2032430 · Cited by 1,813
High‐Power Converters and ac Drives
Wu, B. (2006) · Wiley eBooks · doi:10.1002/0471773719 · Cited by 1,640
Self-citationLow-Voltage Bipolar-Type DC Microgrid for Super High Quality Distribution
Kakigano, H., Miura, Y., & Ise, T. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2077682 · Cited by 995
Celanovic, N., & Boroyevich, D. (2000) · IEEE Transactions on Power Electronics · doi:10.1109/63.838096 · Cited by 915
DC microgrid based distribution power generation system
Ito, Y., Yang, Z., & Akagi, H. (2004) · International Power Electronics and Motion Control Conference · Cited by 383
Powering the Future of Industry: High-Power Adjustable Speed Drive Topologies
Kouro, S., Rodriguez, J., Wu, B., Bernet, S., & Perez, M. (2012) · IEEE Industry Applications Magazine · doi:10.1109/mias.2012.2192231 · Cited by 332
Self-citationDu, Y., Zhou, X., Bai, S., Lukic, S., & Huang, A. (2010) · 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2010.5433359 · Cited by 314
Cited by
DC Microgrids—Part II: A Review of Power Architectures, Applications, and Standardization Issues
Dragicevic, T., Lu, X., Vasquez, J. C., & Guerrero, J. M. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2464277 · Cited by 1,451
Extreme Fast Charging of Electric Vehicles: A Technology Overview
Tu, H., Feng, H., Srdic, S., & Lukic, S. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2019.2958709 · Cited by 898
Safayatullah, M., Elrais, M. T., Ghosh, S., Rezaii, R., & Batarseh, I. (2022) · IEEE Access · doi:10.1109/access.2022.3166935 · Cited by 615
“The fundamental idea of this control is to generate reference balancing current which is minimal to keep the system balanced [113].”
BackgroundAcharige, S. S. G., Haque, M. E., Arif, M. T., Hosseinzadeh, N., Hasan, K. N., & Oo, A. M. T. (2023) · IEEE Access · doi:10.1109/access.2023.3267164 · Cited by 590
Guo, S., & Zhao, H. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.08.082 · Cited by 464
Khalid, M. R., Alam, M. S., Sarwar, A., & Jamil Asghar, M. S. (2019) · eTransportation · doi:10.1016/j.etran.2019.100006 · Cited by 369
Khalid, M. R., Khan, I. A., Hameed, S., Asghar, M. S. J., & Ro, J. (2021) · IEEE Access · doi:10.1109/access.2021.3112189 · Cited by 353
A Review on Electric Vehicle Charging Infrastructure Development in the UK
Chen, T., Zhang, X.-P., Wang, J., Li, J., Wu, C., Hu, M., & Bian, H. (2020) · Journal of Modern Power Systems and Clean Energy · doi:10.35833/mpce.2018.000374 · Cited by 315
Self-citationA study on trends and developments in electric vehicle charging technologies
Hemavathi, S., & Shinisha, A. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105013 · Cited by 303
Electric Vehicles Charging Technology Review and Optimal Size Estimation
Brenna, M., Foiadelli, F., Leone, C., & Longo, M. (2020) · Journal of Electrical Engineering & Technology · doi:10.1007/s42835-020-00547-x · Cited by 298
Rafi, M. A. H., & Bauman, J. (2021) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3015743 · Cited by 264
Power Quality Control of Smart Hybrid AC/DC Microgrids: An Overview
Nejabatkhah, F., Li, Y. W., & Tian, H. (2019) · IEEE Access · doi:10.1109/access.2019.2912376 · Cited by 258
A review on overall control of DC microgrids
Kumar, J., Agarwal, A., & Agarwal, V. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2018.11.013 · Cited by 257
Charging Infrastructure and Grid Integration for Electromobility
Rivera, S., Goetz, S. M., Kouro, S., Lehn, P. W., Pathmanathan, M., Bauer, P., & Mastromauro, R. A. (2023) · Proceedings of the IEEE · doi:10.1109/jproc.2022.3216362 · Cited by 233
Self-citationTan, L., Zhu, N., & Wu, B. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2496904 · Cited by 79
Self-citationA review on unidirectional converters for on-board chargers in electric vehicle
Vijayakumar, S., & Sudhakar, N. (2022) · Frontiers in Energy Research · doi:10.3389/fenrg.2022.1011681 · Cited by 26
“, 2015), multilevel neutral point clamp chopper (Rivera et al., 2015), and interleaved converters (Abusara and Sharkh, 2013).”
Background
Metadata
- Authors
- Rivera, S., Wu, B., Kouro, S., Yaramasu, V., & Wang, J.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2015-04
- Volume
- 62
- Issue
- 4
- Pages
- 1999-2009
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2154396651
- Cited by
- 305
- References
- 19
- FWCI
- 9.02
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.