Junction Temperature Measurement of IGBTs Using Short Circuit Current as a Temperature Sensitive Electrical Parameter for Converter Prototype Evaluation
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
This paper proposes a method to measure the junction temperatures of insulated-gate bipolar transistors (IGBTs) during the converter operation for prototype evaluation. The IGBT short-circuit current is employed as the temperature-sensitive electrical parameter (TSEP). The calibration experiments show that the short-circuit current has an adequate temperature sensitivity of 0.35${\rm A}/^{\circ}\hbox{C} $. The parameter also has good selectivity and linearity, which makes it suitable to be used as a TSEP. Test circuit and hardware design are proposed for the IGBT junction temperature measurement in various power electronics dc–dc and ac–dc converter applications. By connecting a temperature measurement unit to the converter and giving a short-circuit pulse during the converter operation, the short-circuit current is measured, and the IGBT junction temperature can be derived from the calibration curve. The proposed temperature measurement method is a valuable tool for prototype evaluation and avoids the unnecessary safety margin regarding device operating temperatures, which is significant particularly for high-temperature/high-density converter applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Condition Monitoring for Device Reliability in Power Electronic Converters: A Review
Yang, S., Xiang, D., Bryant, A., Mawby, P., Ran, L., & Tavner, P. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2049377 · Cited by 1,278
Ageing and Failure Modes of IGBT Modules in High-Temperature Power Cycling
Smet, V., Forest, F., Huselstein, J.-J., Richardeau, F., Khatir, Z., Lefebvre, S., & Berkani, M. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2114313 · Cited by 620
Smet, V., Forest, F., Huselstein, J.-J., Rashed, A., & Richardeau, F. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2196894 · Cited by 232 · cited 1×
“lifetime prediction of the power conversion stage [4]–[7].”
Background
Cited by
Choices for interaction with things on Internet and underlying issues
Mashal, I., Alsaryrah, O., Chung, T.-Y., Yang, C.-Z., Kuo, W.-H., & Agrawal, D. P. (2015) · Ad Hoc Networks · doi:10.1016/j.adhoc.2014.12.006 · Cited by 303
Robustness and Balancing of Parallel-Connected Power Devices: SiC Versus CoolMOS
Hu, J., Alatise, O., Ortiz Gonzalez, J. A., Bonyadi, R., Alexakis, P., Ran, L., & Mawby, P. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2500187 · Cited by 67
Evaluation of Frequency and Temperature Dependence of Power Losses Difference in Parallel IGBTs
Yang, J., Che, Y., Ran, L., & Jiang, H. (2020) · IEEE Access · doi:10.1109/access.2020.2995971 · Cited by 23
The Predictive Closed-Loop Averaging Control of MMC Phase-Unit Losses Under Unbalanced Conditions
Xu, J., Yu, Y., & Zhao, C. (2019) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2018.2868772 · Cited by 14
Metadata
- Authors
- Xu, Z., Xu, F., & Wang, F.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2014
- Pages
- 1-1
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2058049784
- Cited by
- 142
- References
- 3
- FWCI
- 5.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Junction Temperature Measurement of IGBTs Using Short Circuit Current as a Temperature Sensitive Electrical Parameter for Converter Prototype Evaluation. https://app.cochat.ai/papers/10.1109/tie.2014.2374575
- The paper
- Xu, Z., Xu, F., & Wang, F. (2014). Junction Temperature Measurement of IGBTs Using Short Circuit Current as a Temperature Sensitive Electrical Parameter for Converter Prototype Evaluation. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2014.2374575
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.