Open-Circuit IGBT Fault Detection and Location Isolation for Cascaded Multilevel Converters
The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Abstract
An open-circuit insulated-gate bipolar transistor fault detection technique for cascaded H-bridge (CHB) multilevel converters is presented in this paper. This technique, designed to be implemented independently for each CHB leg, utilizes one current sensor and one voltage sensor to monitor a leg's current and output voltage. Measured voltages are compared to expected voltages, and deviations are used to determine open-circuit fault locations based on the deviation's magnitude and current flow direction. Once potential fault locations have been identified, the fault location is systematically isolated and then verified, reducing the possibility of unnecessary corrective actions due to fault misidentification, e.g., an intermittent gate-misfiring fault being classified as an open-circuit fault. The proposed technique can be implemented for any number of cells, is independent of the pulse width modulation strategy used, and can be applied to symmetric and asymmetric CHB converters regardless of the cell input dc-source magnitudes utilized, i.e., cell input voltages are not required to be equal or to exist in specific ratios. For a CHB leg with M cells, the proposed technique identifies and isolates open-circuit switch faults in less than 2M measurement (sampling) cycles, and verification is completed in less than one full fundamental cycle. Experimentally obtained data demonstrate the efficacy of the proposed fault detection and isolation technique.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Multilevel inverters: a survey of topologies, controls, and applications
Rodriguez, J., Lai, J.-S., & Peng, F. Z. (2002) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2002.801052 · Cited by 6,715 · cited 1×
“2674629 plications, including active filters, renewable energy conversion systems, and traction motor applications [3]–[5], [12], [13].”
BackgroundRecent Advances and Industrial Applications of Multilevel Converters
Kouro, S., Malinowski, M., Gopakumar, K., Pou, J., Franquelo, L. G., Wu, B., Rodriguez, J., Pérez, M. A., & Leon, J. I. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2049719 · Cited by 3,872 · cited 5×
“Insulated-gate bipolar transistors (IGBTs) are known to be one of the most failure prone components of power converters [4], [17]–[21], [23]–[25].”
BackgroundInfluentialAn Industry-Based Survey of Reliability in Power Electronic Converters
Yang, S., Bryant, A., Mawby, P., Xiang, D., Ran, L., & Tavner, P. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2011.2124436 · Cited by 2,019 · cited 2×
“Insulated-gate bipolar transistors (IGBTs) are known to be one of the most failure prone components of power converters [4], [17]–[21], [23]–[25].”
BackgroundA Literature Review of IGBT Fault Diagnostic and Protection Methods for Power Inverters
Lu, B., & Sharma, S. K. (2009) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2009.2027535 · Cited by 985
Survey on Reliability of Power Electronic Systems
Song, Y., & Wang, B. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2192503 · Cited by 861 · cited 1×
“As such, ensuring the reliable operation of converters has become an increasingly important goal for the electrical engineering community [1]–[9], [14]–[23].”
BackgroundStudy and Handling Methods of Power IGBT Module Failures in Power Electronic Converter Systems
Choi, U.-M., Blaabjerg, F., & Lee, K.-B. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2373390 · Cited by 700 · cited 3×
“Various techniques for fault identification have been proposed [11], [15], [16], [20], [23], [28], but are targeted toward implementation in two-level voltage-source inverters, and, therefore,”
BackgroundSurvey of fault-tolerance techniques for three-phase voltage source inverters
Mirafzal, B. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2301712 · Cited by 440 · cited 6×
“Switch failures can be roughly classified as open- or shortcircuit faults [1], [11], [17]–[20], [28].”
BackgroundSelf-citationFault Diagnosis and Reconfiguration for Multilevel Inverter Drive Using AI-Based Techniques
Khomfoi, S., & Tolbert, L. M. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.906994 · Cited by 284 · cited 5×
“cause extensive damage to an entire system [1], [6], [13], [17], [18], [20].”
BackgroundMethodInfluentialJung, S.-M., Park, J.-S., Kim, H.-W., Cho, K.-Y., & Youn, M.-J. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2212916 · Cited by 271 · cited 8×
“Switch failures can be roughly classified as open- or shortcircuit faults [1], [11], [17]–[20], [28].”
BackgroundInfluentialMethod for Detecting an Open-Switch Fault in a Grid-Connected NPC Inverter System
Choi, U.-M., Jeong, H.-G., Lee, K.-B., & Blaabjerg, F. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2178435 · Cited by 241 · cited 4×
“, artificial neural networks and genetic algorithms [13], can also be used to identify faulty switches in multilevel converters by utilizing significant computational effort [6], [16], as well as application specific data or expert knowledge for training.”
BackgroundMethodInfluentialWang, Z., Shi, X., Tolbert, L. M., Wang, F., & Blalock, B. J. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2278794 · Cited by 241 · cited 2×
“Short-circuit failures can cause nearly immediate damage to a CHB cell [9], [17], [18], [20], [22], but the dangers of open-circuit faults cannot be neglected as extended operation with open-circuit failures can”
BackgroundExtended Operation of Cascade Multicell Converters Under Fault Condition
Lezana, P., & Ortiz, G. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2019771 · Cited by 219 · cited 3×
“, [12], [27], the fault location must be pinpointed [9].”
BackgroundFault Detection on Multicell Converter Based on Output Voltage Frequency Analysis
Lezana, P., Aguilera, R., & Rodriguez, J. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2013845 · Cited by 215 · cited 7×
“, [12], [27], the fault location must be pinpointed [9].”
BackgroundMethodInfluentialReliability Prediction for Inverters in Hybrid Electrical Vehicles
Hirschmann, D., Tissen, D., Schroder, S., & De Doncker, R. W. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.909236 · Cited by 209
Gou, B., Ge, X., Wang, S., Feng, X., Kuo, J. B., & Habetler, T. G. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2465299 · Cited by 191 · cited 5×
“, artificial neural networks and genetic algorithms [13], can also be used to identify faulty switches in multilevel converters by utilizing significant computational effort [6], [16], as well as application specific data or expert knowledge for training.”
BackgroundInfluentialPower Cycle Testing of Power Switches: A Literature Survey
Gopi Reddy, L., Tolbert, L., & Ozpineci, B. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2359015 · Cited by 187 · cited 1×
“Thermomechanical fatigue is the main cause of IGBT failures [8], [19], [21], [24], and due to the inherent power and thermal cycling in some applications, e.”
BackgroundCaseiro, L. M. A., & Mendes, A. M. S. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2341558 · Cited by 170 · cited 8×
“Switch failures can be roughly classified as open- or shortcircuit faults [1], [11], [17]–[20], [28].”
BackgroundMethodInfluentialFreire, N. M. A., Estima, J. O., & Cardoso, A. J. M. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2279383 · Cited by 167 · cited 5×
“Insulated-gate bipolar transistors (IGBTs) are known to be one of the most failure prone components of power converters [4], [17]–[21], [23]–[25].”
BackgroundInfluentialFault-Tolerant Approach for Modular Multilevel Converters Under Submodule Faults
Deng, F., Tian, Y., Zhu, R., & Chen, Z. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2538201 · Cited by 154 · cited 1×
“Regardless of the topology used, solid-state-based power converters are vital components of many advanced electrical systems [1]–[7], [12]–[19].”
BackgroundYang, Q., Qin, J., & Saeedifard, M. (2016) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2015.2477476 · Cited by 140 · cited 1×
“Thermomechanical fatigue is the main cause of IGBT failures [8], [19], [21], [24], and due to the inherent power and thermal cycling in some applications, e.”
BackgroundReliable Modular Multilevel Converter Fault Detection With Redundant Voltage Sensor
Picas, R., Zaragoza, J., Pou, J., & Ceballos, S. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2526684 · Cited by 134 · cited 7×
“, [12], [27], the fault location must be pinpointed [9].”
BackgroundMethodInfluentialFault Detection for IGBT Using Adaptive Thresholds During the Turn-on Transient
Rodríguez-Blanco, M. A., Vázquez-Pérez, A., Hernández-González, L., Golikov, V., Aguayo-Alquicira, J., & May-Alarcón, M. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2364154 · Cited by 113 · cited 8×
“cause extensive damage to an entire system [1], [6], [13], [17], [18], [20].”
BackgroundInfluentialGarg, P., Essakiappan, S., Krishnamoorthy, H. S., & Enjeti, P. N. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2361905 · Cited by 101 · cited 2×
“Regardless of the topology used, solid-state-based power converters are vital components of many advanced electrical systems [1]–[7], [12]–[19].”
BackgroundDetecting Open-Switch Faults: Using Asymmetric Zero-Voltage Switching States
Sim, H.-W., Lee, J.-S., & Lee, K. (2016) · IEEE Industry Applications Magazine · doi:10.1109/mias.2015.2459096 · Cited by 61 · cited 9×
“Switch failures can be roughly classified as open- or shortcircuit faults [1], [11], [17]–[20], [28].”
BackgroundMethodInfluentialAn Adaptive SPWM Technique for Cascaded Multilevel Converters With Time-Variant DC Sources
Lamb, J. M., & Mirafzal, B. (2016) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2573755 · Cited by 43 · cited 7×
“2674629 plications, including active filters, renewable energy conversion systems, and traction motor applications [3]–[5], [12], [13].”
BackgroundMethodSelf-citationJain, A. K., & Ranganathan, V. T. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2060358 · Cited by 34
Sun, L., Wu, Z., Xiao, F., Cai, X., & Wang, S. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2477849 · Cited by 23 · cited 2×
“The probability of an IGBT fault is further increased when using multilevel converters, as opposed to traditional two-level voltage source inverters, due to the high number of semiconductor switches [2], [4], [9]–[12].”
Background
Cited by
Zhou, D., Yang, S., & Tang, Y. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2796584 · Cited by 143
Metadata
- Authors
- Lamb, J., & Mirafzal, B.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2017-06
- Volume
- 64
- Issue
- 6
- Pages
- 4846-4856
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2590567059
- Cited by
- 170
- References
- 27
- FWCI
- 7.50
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.