Analytical Modeling and Implementation of a Coaxially Wound Transformer With Integrated Filter Inductance for Isolated Soft-Switching DC–DC Converters
The DOI matches its Crossref record; 24 of the 26 references it cites were found in a registry or an index.
Abstract
In this paper, we propose an approach for integrating a series filter inductance in a coaxially wound transformer (CWT) as a potential alternative to conventional solenoidally wound transformers (SWT) for high-power isolated soft-switching dc-dc converters. The critical elements that determine the size and the performance of soft-switching dc-dc converters are the isolation transformer and the filter elements. While conventional SWTs using a stray magnetic field as a filter inductance often suffer from a considerably increased loss, heat congestion, and electromagnetic interference, a CWT is rarely affected by high frequency and fringing effects. The desired properties are still valid while the required filter inductance is fully integrated with an isolation transformer using the proposed method. In addition, the evenly distributed magnetic fields in a concentric geometry enable accurate electrical and mechanical analysis and a specific application-oriented design. In this paper, the operating principles, design procedure, and loss modeling of a CWT with an integrated filter inductance are introduced. Its functionality and suitability for high-frequency applications were proven by theoretical analysis and experiments. A prototype transformer with an integrated inductance 4 mH was facilitated and evaluated in a 15 kV-SiC mosfet-based 6 k-400 Vdc stage for a solid-state transformer of up to 6.5 kW at a switching frequency of 20 kHz.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Fundamentals of Power Electronics
Erickson, R. W., & Maksimović, D. (2001) · Springer eBooks · doi:10.1007/b100747 · Cited by 6,112
Fundamentals of Power Electronics
Erickson, R. W., & Maksimović, D. (2020) · Springer eBooks · doi:10.1007/978-3-030-43881-4 · Cited by 5,420
Performance characterization of a high-power dual active bridge DC-to-DC converter
Kheraluwala, M. N., Gascoigne, R. W., Divan, D. M., & Baumann, E. D. (1992) · IEEE Transactions on Industry Applications · doi:10.1109/28.175280 · Cited by 1,496
Effects of eddy currents in transformer windings
Dowell, P. L. (1966) · Proceedings of the Institution of Electrical Engineers · doi:10.1049/piee.1966.0236 · Cited by 1,438
Review of Solid-State Transformer Technologies and Their Application in Power Distribution Systems
She, X., Huang, A. Q., & Burgos, R. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2277917 · Cited by 1,164
Improved analytical modeling of conductive losses in magnetic components
Ferreira, J. A. (1994) · IEEE Transactions on Power Electronics · doi:10.1109/63.285503 · Cited by 629
Optimal choice for number of strands in a litz-wire transformer winding
Sullivan, C. R. (1999) · IEEE Transactions on Power Electronics · doi:10.1109/63.750181 · Cited by 558
Improved Core-Loss Calculation for Magnetic Components Employed in Power Electronic Systems
Muhlethaler, J., Biela, J., Kolar, J. W., & Ecklebe, A. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2162252 · Cited by 535
Krismer, F., & Kolar, J. W. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2025284 · Cited by 470
Lin, D., Zhou, P., Fu, W. N., Badics, Z., & Cendes, Z. J. (2004) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2004.825025 · Cited by 425
Research works printed but not linked: 1
- 2017, 20-3300 High Temperature and Thermal Shock Epoxy
Cited by
99% Efficient 10 kV SiC-Based 7 kV/400 V DC Transformer for Future Data Centers
Rothmund, D., Guillod, T., Bortis, D., & Kolar, J. W. (2019) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2018.2886139 · Cited by 315
Agarwal, R., Li, H., Guo, Z., & Cheetham, P. (2023) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2022.3174243 · Cited by 79
“Researches in [1], [2] have designed MF frequency transformers for inductor tank based MV dc SST with PWM frequency from 3 kHz to 20 kHz.”
BackgroundSima, W., Peng, D., Yang, M., Sun, P., Zou, B., & Zhao, X. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2977544 · Cited by 31
A High-Efficiency 80-kW Split Planar Transformer for Medium-Voltage Modular Power Conversion
Lu, S., Kong, D., Xu, S., Luo, L., & Li, S. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3151796 · Cited by 31
Chen, Y., Fu, W. N., Lin, H., & Niu, S. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3202038 · Cited by 17
Mechnane, F., Drid, S., Naït-Saïd, N., & Chrifi‐Alaoui, L. (2023) · Applied Sciences · doi:10.3390/app13127047 · Cited by 17
A Medium Frequency Transformer Design Tool with Methodologies Adapted to Various Structures
Fouineau, A., Guillet, M., Lefebvre, B., Raulet, M., & Sixdenier, F. (2020) · International Conference on Ecological Vehicles and Renewable Energies (EVER) · doi:10.1109/ever48776.2020.9243104 · Cited by 14
Saeed, L., Khan, M. Y. A., Arif, M., Majid, A., & Saleem, J. (2018) · International Conference on Computing, Mathematics and Engineering Technologies (iCoMET) · doi:10.1109/icomet.2018.8346437 · Cited by 10
A Restart Strategy of Bipolar Short-Circuit Fault for MMC based Power Electronic Transformer
Xu, Y., Zhou, Z., Deng, Z., Li, W., Qiu, S., & Xu, Y. (2020) · Asia Energy and Electrical Engineering Symposium (AEEES) · doi:10.1109/aeees48850.2020.9121392 · Cited by 9
A High-frequency High-power Transformer Based on Split Planar Coils for High-isolation Applications
Kong, D., Min, Q., Lu, S., & Li, S. (2021) · IEEE International Electrical and Energy Conference (CIEEC) · doi:10.1109/cieec50170.2021.9510916 · Cited by 8
Influence of Phase-Shifted Square Wave Modulation on Medium Frequency Transformer in a MMC Based SST
Agarwal, R., Martin, S., & Li, H. (2020) · IEEE Access · doi:10.1109/access.2020.3042935 · Cited by 7
“have presented a 10 kW/ 20 kHz coaxially wound transformer [9].”
Design and Control for a Multiport DC-DC Boost Converter with Battery Backup for Microgrid
Saeed, L., Khan, M. Y. A., Khan, S. H., & Azhar, M. H. (2019) · International Conference on Engineering and Emerging Technologies (ICEET) · doi:10.1109/ceet1.2019.8711859 · Cited by 7
Core-Type Transformer Design Method with Integrated Series Inductance for DC-DC Converters
Kaymak, M., Fincan, M. E., & Doncker, R. W. D. (2019) · International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia) · doi:10.23919/icpe2019-ecceasia42246.2019.8796868 · Cited by 6
Yadollahi, K., & Zakipour, A. (2025) · Scientific Reports · doi:10.1038/s41598-025-19533-2 · Cited by 5
Baek, S., & Lee, J. S. (2022) · Electrical Engineering · doi:10.1007/s00202-022-01522-7 · Cited by 4
Self-citationModular DC Solid State Transformer with Fault-Tolerant Function
Meng, X., Jia, Y., Ren, C., Lin, X., & Zhang, B. (2019) · International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia) · doi:10.23919/icpe2019-ecceasia42246.2019.8797270 · Cited by 4
Lu, S., Xu, S., Deng, J., Li, T., Li, S., Xia, J., & Zhao, D. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3522589 · Cited by 3
Nations, M., Beddingfield, R., & Bhattacharya, S. (2022) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce50734.2022.9947822 · Cited by 2
Self-citationLe, N. H., Nagai, S., Kusaka, K., & Itoh, J. (2019) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2019.8912891 · Cited by 2
Fouineau, A. (2019) · theses.fr (ABES) · doi:10.70675/9c9cfcdez524fz4b1ezb2acz97f0aacb4e39 · Cited by 2
An Efficient and Practical 2D FEM-Based Framework for AC Resistance Modeling of Litz Wire Windings
Baek, S. (2025) · Applied Sciences · doi:10.3390/app15169185 · Cited by 1
Self-citationFault Analysis of DC-Transformer for DC Distribution grid
Lin, P., Zhang, Z., Chen, S., Zhang, Z., & Wang, X. (2019) · IEEE Innovative Smart Grid Technologies-Asia · doi:10.1109/isgt-asia.2019.8881511 · Cited by 1
Kikuchi, N., Kusaka, K., Watanabe, H., & Itoh, J. (2023) · IEEJ Transactions on Industry Applications · doi:10.1541/ieejias.143.758 · Cited by 1
Hybrid Multiple Chopper Cells of PWM and Square-wave Operation for Solid-state Transformer
Kikuchi, N., Itoh, J., Kusaka, K., & Le, H. N. (2020) · European Conference on Power Electronics and Applications · doi:10.23919/epe20ecceeurope43536.2020.9215922
Fast Chargers for Plug-In Electric and Hybrid Vehicles
Mi, C. C., Li, S., & Lu, S. (2024) · Green energy and technology · doi:10.1007/978-981-99-3060-9_9
Wang, K., & Jiang, Y. (2025) · International Conference on Energy Internet and Power Systems (ICEIPS) · doi:10.1109/iceips67524.2025.11380958
Dual Active Bridge DC-DC Fuzzy Adaptive PI Control Backflow Power Optimization Strategy
Wang, K., & Jiang, Y. (2025) · doi:10.1109/epee67527.2025.11428675
Metadata
- Authors
- Baek, S., & Bhattacharya, S.
- Affiliations
- Kyungnam University (KR)
- ORCID
- Baek, Seunghun
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2018-03
- Volume
- 65
- Issue
- 3
- Pages
- 2245-2255
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2751753865
- Cited by
- 26
- References
- 26
- Citations by year
- 2025: 4 · 2024: 2 · 2023: 2 · 2022: 5 · 2021: 1 · 2020: 5 · 2019: 5 · 2018: 2
- FWCI
- 1.36
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Industrial Electronics (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Wireless Power Transfer Systems
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electromagnetic Compatibility and Noise Suppression
- Keywords
- isolation transformer, solid-state transformer, SiC MOSFET, high-frequency power conversion, transformer design
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.