Analytical Modeling and Implementation of a Coaxially Wound Transformer With Integrated Filter Inductance for Isolated Soft-Switching DC–DC Converters
The DOI matches its Crossref record; 24 of the 26 references it cites were found in a registry or an index.
Abstract
In this paper, we propose an approach for integrating a series filter inductance in a coaxially wound transformer (CWT) as a potential alternative to conventional solenoidally wound transformers (SWT) for high-power isolated soft-switching dc-dc converters. The critical elements that determine the size and the performance of soft-switching dc-dc converters are the isolation transformer and the filter elements. While conventional SWTs using a stray magnetic field as a filter inductance often suffer from a considerably increased loss, heat congestion, and electromagnetic interference, a CWT is rarely affected by high frequency and fringing effects. The desired properties are still valid while the required filter inductance is fully integrated with an isolation transformer using the proposed method. In addition, the evenly distributed magnetic fields in a concentric geometry enable accurate electrical and mechanical analysis and a specific application-oriented design. In this paper, the operating principles, design procedure, and loss modeling of a CWT with an integrated filter inductance are introduced. Its functionality and suitability for high-frequency applications were proven by theoretical analysis and experiments. A prototype transformer with an integrated inductance 4 mH was facilitated and evaluated in a 15 kV-SiC mosfet-based 6 k-400 Vdc stage for a solid-state transformer of up to 6.5 kW at a switching frequency of 20 kHz.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Fundamentals of Power Electronics
Erickson, R. W., & Maksimović, D. (2001) · Springer eBooks · doi:10.1007/b100747 · Cited by 6,112
Fundamentals of Power Electronics
Erickson, R. W., & Maksimović, D. (2020) · Springer eBooks · doi:10.1007/978-3-030-43881-4 · Cited by 5,420
Performance characterization of a high-power dual active bridge DC-to-DC converter
Kheraluwala, M. N., Gascoigne, R. W., Divan, D. M., & Baumann, E. D. (1992) · IEEE Transactions on Industry Applications · doi:10.1109/28.175280 · Cited by 1,496
Effects of eddy currents in transformer windings
Dowell, P. L. (1966) · Proceedings of the Institution of Electrical Engineers · doi:10.1049/piee.1966.0236 · Cited by 1,438
Review of Solid-State Transformer Technologies and Their Application in Power Distribution Systems
She, X., Huang, A. Q., & Burgos, R. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2277917 · Cited by 1,164
Improved analytical modeling of conductive losses in magnetic components
Ferreira, J. A. (1994) · IEEE Transactions on Power Electronics · doi:10.1109/63.285503 · Cited by 629
Optimal choice for number of strands in a litz-wire transformer winding
Sullivan, C. R. (1999) · IEEE Transactions on Power Electronics · doi:10.1109/63.750181 · Cited by 558
Improved Core-Loss Calculation for Magnetic Components Employed in Power Electronic Systems
Muhlethaler, J., Biela, J., Kolar, J. W., & Ecklebe, A. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2162252 · Cited by 535
Krismer, F., & Kolar, J. W. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2025284 · Cited by 470 · cited 2×
“5 with phase-shift modulation (PSM) [17].”
InfluentialLin, D., Zhou, P., Fu, W. N., Badics, Z., & Cendes, Z. J. (2004) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2004.825025 · Cited by 425
Calculation of losses in ferro- and ferrimagnetic materials based on the modified Steinmetz equation
Reinert, J., Brockmeyer, A., & De Doncker, R. W. (2003) · Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370) · doi:10.1109/ias.1999.806023 · Cited by 409
Self-Capacitance of High-Voltage Transformers
Dalessandro, L., da Silveira Cavalcante, F., & Kolar, J. W. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.904252 · Cited by 305
Ortiz, G., Biela, J., Bortis, D., & Kolar, J. W. (2010) · The 2010 International Power Electronics Conference - ECCE ASIA - · doi:10.1109/ipec.2010.5542018 · Cited by 229
A compact, high voltage 25 kW, 50 kHz DC-DC converter based on SiC JFETs
Aggeler, D., Biela, J., & Kolar, J. W. (2008) · 2008 Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2008.4522813 · Cited by 108
Design and hardware implementation of Gen-1 silicon based solid state transformer
Wang, G., Baek, S., Elliott, J., Kadavelugu, A., Wang, F., She, X., Dutta, S., Liu, Y., Zhao, T., Yao, W., et al. (2011) · 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2011.5744766 · Cited by 99 · cited 1×
“Among SST configurations at a primary distribution level, a multistage configuration with dc links is one of the most widely used approaches [4]–[6].”
MethodSelf-citationIntegration of Leakage Inductance in Tape Wound Core Transformers for Dual Active Bridge Converters
Cougo, B., & Kolar, J. W. (2012) · Cited by 70
Villar, I., Mir, L., Etxeberria-Otadui, I., Colmenero, J., Agirre, X., & Nieva, T. (2012) · 2012 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2012.6342754 · Cited by 64
Design considerations for high-frequency coaxial winding power transformers
Rauls, M. S., Novotny, D. W., & Divan, D. M. (1993) · IEEE Transactions on Industry Applications · doi:10.1109/28.216547 · Cited by 56
Solid-State Transformers - Key Design Challenges, Applicability, and Future Concepts
Kolar, J. W., & Huber, J. (2016) · International Power Electronics and Motion Control Conference · Cited by 35
Multiturn High-Frequency Coaxial Winding Power Transformers
Rauls, M. S., Novotny, D. W., Divan, D. M., Bacon, R. R., & Gascoigne, R. W. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.363042 · Cited by 33
Optimal Design of a 3.5-kV/11-kW DC–DC Converter for Charging Capacitor Banks of Power Modulators
Ortiz, G., Bortis, D., Biela, J., & Kolar, J. W. (2010) · IEEE Transactions on Plasma Science · doi:10.1109/tps.2009.2038162 · Cited by 27
Optimizing the AC resistance of multilayer transformer windings with arbitrary current waveforms
Hurley, W. G., Gath, E. G., & Breslin, J. G. (2003) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.1999.789077 · Cited by 19
Minimum loss design of a 100 kHz inductor with foil windings
Nysveen, A., & Hernes, M. (2002) · Cited by 17
Baek, S., Cougo, B., Bhattacharya, S., & Ortiz, G. (2012) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2012.6342645 · Cited by 11
Self-citation
Research works printed but not linked: 1
- 2017, 20-3300 High Temperature and Thermal Shock Epoxy
Cited by
99% Efficient 10 kV SiC-Based 7 kV/400 V DC Transformer for Future Data Centers
Rothmund, D., Guillod, T., Bortis, D., & Kolar, J. W. (2019) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2018.2886139 · Cited by 315
Agarwal, R., Li, H., Guo, Z., & Cheetham, P. (2023) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2022.3174243 · Cited by 79
“Researches in [1], [2] have designed MF frequency transformers for inductor tank based MV dc SST with PWM frequency from 3 kHz to 20 kHz.”
BackgroundSima, W., Peng, D., Yang, M., Sun, P., Zou, B., & Zhao, X. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2977544 · Cited by 31
A High-Efficiency 80-kW Split Planar Transformer for Medium-Voltage Modular Power Conversion
Lu, S., Kong, D., Xu, S., Luo, L., & Li, S. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3151796 · Cited by 31
Chen, Y., Fu, W. N., Lin, H., & Niu, S. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3202038 · Cited by 17
Metadata
- Authors
- Baek, S., & Bhattacharya, S.
- Affiliations
- Kyungnam University (KR)
- ORCID
- Baek, Seunghun
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2018-03
- Volume
- 65
- Issue
- 3
- Pages
- 2245-2255
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2751753865
- Cited by
- 26
- References
- 26
- Citations by year
- 2025: 4 · 2024: 2 · 2023: 2 · 2022: 5 · 2021: 1 · 2020: 5 · 2019: 5 · 2018: 2
- FWCI
- 1.36
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Industrial Electronics (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Wireless Power Transfer Systems
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electromagnetic Compatibility and Noise Suppression
- Keywords
- isolation transformer, solid-state transformer, SiC MOSFET, high-frequency power conversion, transformer design
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.