The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
A Cascaded Boost–Buck Converter for High-Efficiency Wireless Power Transfer Systems
Abstract
Wireless power transfer (WPT) has attracted an ever increasing interest from both industry and academics over the past few years. Its applications vary from small power devices such as mobile phones and tablets to high power electric vehicles and from small transfer distance of centimeters to large distance of tens of centimeters. In order to achieve a high-efficiency WPT system, each circuit should function at a high efficiency along with the proper impedance matching techniques to minimize the power reflection due to the impedance mismatch. This paper proposes an analysis on the system efficiency to determine the optimal impedance requirement for coils, rectifier, and dc–dc converter. A novel cascaded boost–buck dc–dc converter is designed to provide the optimal impedance matching in WPT system for various loads including resistive load, ultracapacitors, and batteries. The proposed 13.56-MHz WPT system can achieve a total system efficiency over 70% in experiment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(1963) · Journal of the Franklin Institute · doi:10.1016/0016-0032(63)90675-6 · Cited by 5,770
Wireless Power Transfer via Strongly Coupled Magnetic Resonances
Kurs, A., Karalis, A., Moffatt, R., Joannopoulos, J. D., Fisher, P., & Soljačić, M. (2007) · Science · doi:10.1126/science.1143254 · Cited by 5,576
Design Considerations for a Contactless Electric Vehicle Battery Charger
Wang, C.-S., Stielau, O. H., & Covic, G. A. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.855672 · Cited by 1,487
Design and Optimization of Circular Magnetic Structures for Lumped Inductive Power Transfer Systems
Budhia, M., Covic, G. A., & Boys, J. T. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2143730 · Cited by 1,039
Imura, T., & Hori, Y. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2112317 · Cited by 581
Shinohara, N. (2011) · IEEE Microwave Magazine · doi:10.1109/mmm.2011.942732 · Cited by 385
A Unity-Power-Factor IPT Pickup for High-Power Applications
Keeling, N. A., Covic, G. A., & Boys, J. T. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2027255 · Cited by 371
Imura, T., Okabe, H., & Hori, Y. (2009) · 2009 IEEE Vehicle Power and Propulsion Conference · doi:10.1109/vppc.2009.5289747 · Cited by 312
Battery and battery management for hybrid electric vehicles: a review
Conte, F. V. (2006) · e+i Elektrotechnik und Informationstechnik · doi:10.1007/s00502-006-0383-6 · Cited by 127
Cited by
Forouzesh, M., Siwakoti, Y. P., Gorji, S. A., Blaabjerg, F., & Lehman, B. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2652318 · Cited by 2,123
Li, H., Li, J., Wang, K., Chen, W., & Yang, X. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2349534 · Cited by 592
Analysis and Tracking of Optimal Load in Wireless Power Transfer Systems
Fu, M., Yin, H., Zhu, X., & Ma, C. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2347071 · Cited by 330
Self-citationControl design for optimizing efficiency in inductive power transfer systems
Huang, Z., Wong, S.-C., & Tse, C. K. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2724039 · Cited by 242
Praneeth, A. V. J. S., & Williamson, S. S. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2019.2919197 · Cited by 50
Metadata
- Authors
- Fu, M., Ma, C., & Zhu, X.
- Venue
- IEEE Transactions on Industrial Informatics
- Published
- 2014-08
- Volume
- 10
- Issue
- 3
- Pages
- 1972-1980
- ISSN
- 1551-3203 (ISSN-L)
- 1941-0050
- OpenAlex
- W2088517673
- Cited by
- 272
- References
- 9
- FWCI
- 14.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Cascaded Boost–Buck Converter for High-Efficiency Wireless Power Transfer Systems. https://app.cochat.ai/papers/10.1109/tii.2013.2291682
- The paper
- Fu, M., Ma, C., & Zhu, X. (2014). A Cascaded Boost–Buck Converter for High-Efficiency Wireless Power Transfer Systems. IEEE Transactions on Industrial Informatics. https://doi.org/10.1109/tii.2013.2291682
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
