Automatic Defect Detection on Hot-Rolled Flat Steel Products
The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Abstract
Automatic defect detection on hot-rolled steel surface is challenging owing to its localization on a large surface, variation in appearance, and their rare occurrences. It is difficult to detect these defects either by physics-based models or by small-sample statistics using a single threshold. As a result, this problem is focused to derive a set of good-quality defect descriptors from the surface images. These descriptors should discriminate the various surface defects when fed to suitable machine learning algorithms. This research work has evaluated the performance of a number of different wavelet feature sets, namely, Haar, Daubechies 2 (DB2), Daubechies 4 (DB4), biorthogonal spline, and multiwavelet in different decomposition levels derived from 32 × 32 contiguous (nonoverlapping) pixel blocks of steel surface images. We have developed an automated visual inspection system for an integrated steel plant to capture surface images in real time. It localizes defects employing kernel classifiers, such as support vector machine and recently proposed vector-valued regularized kernel function approximation. Test results on 1000 defect-free and 432 defective images comprising of 24 types of defect classes reveal that three-level Haar feature set is more promising to address this problem than the other wavelet feature sets as well as texture-based segmentation or thresholding technique of defect detection.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The central outcome of this paper, based on test results on 24 types of defect classes, was that the wavelet feature sets were better suited for steel surface defect detection application compared to texture-based segmentation or thresholding techniques.”
From Review of vision-based steel surface inspection systems (2014) · cites this paper as [70]
In the citing paper
“Further, three-level Haar feature set is more promising compared to the Daubechies, bior and multiwavelet features.”
From Review of vision-based steel surface inspection systems (2014) · cites this paper as [70]
In the citing paper
“In an elaborate study [70], five different types of wavelets, namely, Haar, Daubechies2 (DB2), Daubechies 4 (DB4), biorthogonal spline (bior) and multiwavelet, were used to extract features by decomposing the small blocks (32 × 32) of surface images into different resolution levels.”
From Review of vision-based steel surface inspection systems (2014) · cites this paper as [70]
In the citing paper
“With VVRKFA classification accuracy of 94% was achieved.”
From Review of vision-based steel surface inspection systems (2014) · cites this paper as [70]
In the citing paper
“Lee et al. [72] (cold strip application) and [70] (hot strip application) used wavelet-based methods to classify 8 types and 24 types of defects, respectively.”
From Review of vision-based steel surface inspection systems (2014) · cites this paper as [70]
7 more claims about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
The Nature of Statistical Learning Theory
Vapnik, V. N. (1995) · doi:10.1007/978-1-4757-2440-0 · Cited by 39,138
A Wavelet Tour of Signal Processing
(1999) · Elsevier eBooks · doi:10.1016/b978-0-12-466606-1.x5000-4 · Cited by 16,227 · cited 2×
“An iterative computational approach to the DWT [21], [22] is shown in Fig.”
MethodAn Introduction to Support Vector Machines and Other Kernel-based Learning Methods
Cristianini, N., & Shawe-Taylor, J. (2000) · doi:10.1017/cbo9780511801389 · Cited by 13,855
Libsvm : A library for support vector machines
Ferrari, V. (2008) · Medical Entomology and Zoology · Cited by 10,122
An Introduction to Support Vector Machines
Cristianini, N., & Shawe-Taylor, J. S. (2000) · ePrints Soton (University of Southampton) · Cited by 4,115
Digital Image Processing: PIKS Scientific Inside
Pratt, W. K. (2007) · Wiley eBooks · doi:10.1002/0470097434 · Cited by 2,616
Linear algebra and its applications
(1981) · Linear Algebra and its Applications · doi:10.1016/0024-3795(81)90106-3 · Cited by 872
Computer-Vision-Based Fabric Defect Detection: A Survey
Kumar, A. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.1930.896476 · Cited by 725 · cited 1×
“In the literature, there are methods of defect detection inside steel casting [1], on fabric surface [2]–[4], glass plates [5], liquid crystal display images [6], etc.”
MethodKernel Methods for Pattern Analysis
Breneman, J. (2005) · Technometrics · doi:10.1198/tech.2005.s264 · Cited by 426
Nonlinear Dynamic Process Monitoring Using Canonical Variate Analysis and Kernel Density Estimations
Odiowei, P.-E. P., & Cao, Y. (2010) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2009.2032654 · Cited by 361 · cited 1×
“efficiently applied in many industries for automatic detection of faults [12]–[14] as well as for dynamic process monitoring [15].”
Background
Research works printed but not linked: 2
- gonzalez, 2007, Digital Image Processing
- mitchell, 1997, Machine Learning
Cited by
An End-to-End Steel Surface Defect Detection Approach via Fusing Multiple Hierarchical Features
He, Y., Song, K., Meng, Q., & Yan, Y. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2915404 · Cited by 1,341
“For example, some methods perform binary classification to find the regions of defects [9], [10] or only provide a coarse region of a defect [11], [12].”
MethodSong, K., & Yan, Y. (2013) · Applied Surface Science · doi:10.1016/j.apsusc.2013.09.002 · Cited by 1,026
Automated Visual Defect Detection for Flat Steel Surface: A Survey
Luo, Q., Fang, X., Liu, L., Yang, C., & Sun, Y. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2963555 · Cited by 559
“See https://www.ieee.org/publications/rights/index.html for more information. sufferings of high temperature, dense mist, heavy cooling water drops [5], uneven illumination, stochastic noises [1], [2], and aperiodic vibration [6].”
BackgroundInfluentialReview of vision-based steel surface inspection systems
Neogi, N., Mohanta, D. K., & Dutta, P. K. (2014) · EURASIP Journal on Image and Video Processing · doi:10.1186/1687-5281-2014-50 · Cited by 322
“Geometric defects are mainly caused by abnormalities in rollers and in rolling mills where as texture defects generally are of metallurgical origin [70].”
BackgroundMethodInfluentialSelf-citationReview of surface defect detection of steel products based on machine vision
Tang, B., Chen, L., Sun, W., & Lin, Z. (2023) · IET Image Processing · doi:10.1049/ipr2.12647 · Cited by 271
Ferguson, M., Ak, R., Lee, Y.-T. T., & Law, K. H. (2018) · Smart and Sustainable Manufacturing Systems · doi:10.1520/ssms20180033 · Cited by 274
A deep-learning-based approach for fast and robust steel surface defects classification
Fu, G., Sun, P., Zhu, W., Yang, J., Cao, Y., Yang, M. Y., & Cao, Y. (2019) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2019.05.005 · Cited by 271
An improved Otsu method using the weighted object variance for defect detection
Yuan, X.-C., Wu, L.-S., & Peng, Q. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.05.033 · Cited by 228
Automatic localization of casting defects with convolutional neural networks
Ferguson, M., Ak, R., Lee, Y.-T. T., & Law, K. H. (2017) · 2017 IEEE International Conference on Big Data (Big Data) · doi:10.1109/bigdata.2017.8258115 · Cited by 214
“The classifier is commonly a support vector machine (SVM) or a non-linear boosted classifier [3].”
BackgroundMethodInfluentialAn efficient lightweight convolutional neural network for industrial surface defect detection
Zhang, D., Hao, X., Wang, D., Qin, C., Zhao, B., Liang, L., & Liu, W. (2023) · Artificial Intelligence Review · doi:10.1007/s10462-023-10438-y · Cited by 208
“Support vector machine (SVM) and decision tree all use this method (Ghorai et al. 2013), in which the system performance largely depends on the accurate representation of specific feature types.”
MethodSteel Surface Defect Recognition: A Survey
Wen, X., Shan, J., He, Y., & Song, K. (2022) · Coatings · doi:10.3390/coatings13010017 · Cited by 210
Solar cell surface defect inspection based on multispectral convolutional neural network
Chen, H., Pang, Y., Hu, Q., & Liu, K. (2020) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-018-1458-z · Cited by 177
Yang, J., Fu, G., Zhu, W., Cao, Y., Cao, Y., & Yang, M. Y. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.2986875 · Cited by 189
“Then, various feature classifiers, such as thresholding scheme [11], support vector machine (SVM) [12], Markov random fields (MRFs) [13], and neural networks (NNs) [14], are utilized to differentiate defect and normal image patches.”
MethodGeneralized Completed Local Binary Patterns for Time-Efficient Steel Surface Defect Classification
Luo, Q., Sun, Y., Li, P., Simpson, O., Tian, L., & He, Y. (2019) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2018.2852918 · Cited by 178
“The gray value is sensitive to cooling water [4], uneven illumination [5], multiple material types [8], and mechanical vibration [3], [9].”
BackgroundA steel surface defect inspection approach towards smart industrial monitoring
Hao, R., Lu, B., Cheng, Y., Li, X., & Huang, B. (2021) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-020-01670-2 · Cited by 175
“2010), local binary pattern feature (Song and Yan 2013), wavelet transform feature (Ghorai et al. 2013), and manually customized spatial statistical feature (Chu et al.”
MethodInfluentialDu, W., Shen, H., Fu, J., Zhang, G., & He, Q. (2019) · NDT & E International · doi:10.1016/j.ndteint.2019.102144 · Cited by 174
Steel Surface Defect Detection Using a New Haar–Weibull-Variance Model in Unsupervised Manner
Liu, K., Wang, H., Chen, H., Qu, E., Tian, Y., & Sun, H. (2017) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2017.2712838 · Cited by 161
Research Progress of Automated Visual Surface Defect Detection for Industrial Metal Planar Materials
Fang, X., Luo, Q., Zhou, B., Li, C., & Tian, L. (2020) · Sensors · doi:10.3390/s20185136 · Cited by 160
“Ghorai et al. [5] believe that the performance of classifiers in defect detection depends largely on the combination of features and classifiers.”
BackgroundMethodInfluentialA Simple Guidance Template-Based Defect Detection Method for Strip Steel Surfaces
Wang, H., Zhang, J., Tian, Y., Chen, H., Sun, H., & Liu, K. (2019) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2887145 · Cited by 153
“[4] applied the wavelet features and kernel classifiers to detect the defects on hot-rolled steel products.”
BackgroundMethodInfluentialDefect transformer: An efficient hybrid transformer architecture for surface defect detection
Wang, J., Xu, G., Yan, F., Wang, J., & Wang, Z. (2023) · Measurement · doi:10.1016/j.measurement.2023.112614 · Cited by 184
Automated Visual Defect Classification for Flat Steel Surface: A Survey
Luo, Q., Fang, X., Su, J., Zhou, J., Zhou, B., Yang, C., Liu, L., Gui, W., & Tian, L. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.3030167 · Cited by 148
“the surface images into different resolution levels [4], [99].”
BackgroundAdvances in deep concealed scene understanding
Fan, D.-P., Ji, G.-P., Xu, P., Cheng, M., Sakaridis, C., & Gool, L. V. (2023) · Visual Intelligence · doi:10.1007/s44267-023-00019-6 · Cited by 173
“…works have achieved promising advances in identifying visual defects by vision-based techniques, such as classification [198– 200], detection [201–203], and segmentation [204–206], these techniques work on the assumption that defects are easily detected, but they ignore those challenging defects…”
BackgroundYapi, D., Allili, M. S., & Baaziz, N. (2017) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2017.2696748 · Cited by 140
Chen, H., Du, Y., Fu, Y., Zhu, J., & Zeng, H. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3238698 · Cited by 190
“For defects with periodic texture backgrounds, wavelet transforms [7] and Gabor transforms [8] can be used to change the image from the spatial domain to the frequency domain for detection.”
MethodClassification of surface defects on steel sheet using convolutional neural networks
Zhou, S., Chen, Y., Zhang, D., Xie, J., & Zhou, Y. (2017) · Materiali in tehnologije · doi:10.17222/mit.2015.335 · Cited by 130
A cost-effective and automatic surface defect inspection system for hot-rolled flat steel
Luo, Q., & He, Y. (2016) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2015.09.008 · Cited by 129
WSS-YOLO: An improved industrial defect detection network for steel surface defects
Lu, M. L., Sheng, W., Zou, Y. Y., Chen, Y., & Chen, Z. (2024) · Measurement · doi:10.1016/j.measurement.2024.115060 · Cited by 142
Zhang, Y., Wang, W., Li, Z., Shu, S., Lang, X., Zhang, T., & Dong, J. (2022) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2022.105628 · Cited by 118
A novel deep convolutional neural network algorithm for surface defect detection
Zhang, D., Hao, X., Liang, L., Liu, W., & Qin, C. (2022) · Journal of Computational Design and Engineering · doi:10.1093/jcde/qwac071 · Cited by 134
Research Progress of Visual Inspection Technology of Steel Products—A Review
Sun, X., Gu, J., Tang, S., & Li, J. (2018) · Applied Sciences · doi:10.3390/app8112195 · Cited by 109
“Soon after, there were a lot of extensions of the method based on wavelet transform, such as the snake projection wavelet algorithm Li [68], undecimated wavelet transform algorithm [17], wavelet transform to obtain the approximate sub-image method Zhang [48], three-layer Haar wavelet feature set method Ghorai [26], di…”
BackgroundMethodAutomated Visual Inspection of Glass Bottle Bottom With Saliency Detection and Template Matching
Zhou, X., Wang, Y., Xiao, C., Zhu, Q. X., Lu, X. B., Zhang, H., Ge, J., & Zhao, H. (2019) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2018.2886977 · Cited by 109
Tire Defect Detection Using Fully Convolutional Network
Wang, R., Guo, Q., Lu, S., & Zhang, C. (2019) · IEEE Access · doi:10.1109/access.2019.2908483 · Cited by 102
“Over the past two decades, automatic detection techniques have been widely used in industry inspection such as steel [1], titanium coated aluminum [2], solar wafers [3] and fabrics [4]–[6].”
BackgroundRail surface defect detection based on improved Mask R-CNN
Wang, H., Li, M., & Wan, Z. (2022) · Computers & Electrical Engineering · doi:10.1016/j.compeleceng.2022.108269 · Cited by 110
SSA-YOLO: An Improved YOLO for Hot-Rolled Strip Steel Surface Defect Detection
Huang, X., Zhu, J., & Huo, Y. (2024) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2024.3488136 · Cited by 125
“Ghorai et al. [4] conducted an evaluation of various wavelet transforms including Haar, Daubechies 2, Daubechies 4, biorthogonal spline, and multiwavelet across different decomposition levels.”
MethodPerez, H., & Tah, J. H. M. (2020) · Mathematics · doi:10.3390/math8050662 · Cited by 112
Defect detection of injection molding products on small datasets using transfer learning
Liu, J., Guo, F., Gao, H., Li, M., Zhang, Y., & Zhou, H. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.08.034 · Cited by 106
Efficient surface defect detection using self-supervised learning strategy and segmentation network
Xu, R., Hao, R., & Huang, B. (2022) · Advanced Engineering Informatics · doi:10.1016/j.aei.2022.101566 · Cited by 106
Zhang, S., Zhang, Q., Gu, J., Su, L., Li, K., & PECHT, M. G. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.107541 · Cited by 99
Yuan, L., Chen, Y., Tang, H. R., Gao, R., & Wu, W. (2023) · IEEE Sensors Journal · doi:10.1109/jsen.2023.3324441 · Cited by 92
“Furthermore, wavelet transformation [4] can be applied to decompose signals into wavelet functions of varying scales and frequencies to extract local texture information from the image.”
MethodJoining Spatial Deformable Convolution and a Dense Feature Pyramid for Surface Defect Detection
Huang, Z., Zhang, C., Ge, L., Chen, Z., Lü, K., & Wu, C. (2024) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2024.3370962 · Cited by 118
“These significant challenges undoubtedly impose high requirements for surface defect detection methods [1], [2], [3], [4].”
BackgroundUsing regression models for predicting the product quality in a tubing extrusion process
García, V., Sánchez, J. S., Rodríguez‐Picón, L. A., Méndez‐González, L. C., & Domínguez, H. D. J. O. (2018) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-018-1418-7 · Cited by 86
“Ghorai et al (2013) developed a visual inspection system to localize defects on hot-rolled steel surfaces employing some kernel classifiers, such as the support vector machine and the vector-valued regularized kernel function approximation.”
MethodSong, K., Feng, H., Cao, T., Cui, W., & Yan, Y. (2024) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2024.3383513 · Cited by 94
“Before adopting deep learning (DL), experts extract defect feature vectors from the initial defective samples by screening for defect-related information [6].”
BackgroundA Novel and Effective Surface Flaw Inspection Instrument for Large-Aperture Optical Elements
Tao, X., Zhang, Z., Zhang, F., & Xu, D. H. (2015) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2015.2415092 · Cited by 83
“The method of automated visual inspection (AVI) is commonly used in surface inspection for various fields such as textiles, paper, semiconductor wafers, rail heads and concrete materials [2-6].”
MethodCross Position Aggregation Network for Few-Shot Strip Steel Surface Defect Segmentation
Feng, H., Song, K., Cui, W., Zhang, Y., & Yan, Y. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3246519 · Cited by 112
“machine learning methods [7], [8] were proposed to achieve automatic S3D detection in the early days.”
MethodRobust Visual Detection–Learning–Tracking Framework for Autonomous Aerial Refueling of UAVs
Yin, Y., Wang, X., Xu, D., Liu, F., Wang, Y., & Wu, W. (2016) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2015.2509318 · Cited by 76
“classifier is widely used for detection and recognition [14]–[16].”
MethodLuo, Q., Fang, X., Sun, Y., Liu, L., Ai, J., Yang, C., & Simpson, O. (2019) · IEEE Access · doi:10.1109/access.2019.2898215 · Cited by 75
“Hot-rolling lines involve multiple sufferings of high temperature, dense mist, heavy cooling water drops [6], uneven illumination [8], and aperiodic vibration [3, 9].”
BackgroundMethodSteel Surface Defect Diagnostics Using Deep Convolutional Neural Network and Class Activation Map
Lee, S. Y., Tama, B. A., Moon, S. J., & Lee, S. (2019) · Applied Sciences · doi:10.3390/app9245449 · Cited by 91
“, operational conditions and facilities [2,3].”
Multisensor Fusion for Magnetic Flux Leakage Defect Characterization Under Information Incompletion
Fu, M., Liu, J., Zhang, H., & Lu, S. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2984444 · Cited by 73
“Some representative features have been used, such as window features [3], wavelet features in different decomposition levels [4], traditional features including area, average amplitude and peak-to-peak value [5].”
MethodAutomated thermal fuse inspection using machine vision and artificial neural networks
Sun, T.-H., Tien, F.-C., Tien, F.-C., & Kuo, R. J. (2014) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-014-0902-y · Cited by 74
“…2004; Zhang et al. 2013a,b), metal parts (Zheng et al. 2002; Wu and Hou 2003; Steiner and Katz 2007; Sun et al. 2010; Scholz-Reiter et al. 2012; Shen et al. 2012; Ghorai et al. 2013), LCD panels (Gan and Zhao 2013) and semi-conductor wafers (Chang et al. 2011; Sun et al. 2011; Li and Tsai 2012).”
BackgroundMethodA Transfer Residual Neural Network Based on ResNet-50 for Detection of Steel Surface Defects
Zhang, L., Bian, Y., Jiang, P., & Zhang, F. (2023) · Applied Sciences · doi:10.3390/app13095260 · Cited by 104
Depth-wise Squeeze and Excitation Block-based Efficient-Unet model for surface defect detection
Üzen, H., Türkoğlu, M., Aslan, M., & Hanbay, D. (2022) · The Visual Computer · doi:10.1007/s00371-022-02442-0 · Cited by 81
“• Spectrum-based methods spend an effort to find a particular transformation areawhere defective regions on surfaces can be separated from the background using techniques such as Fourier Transform [42], Gabor Filters [43], and Wavelet Transform [44].”
MethodA new graph-based semi-supervised method for surface defect classification
Wang, Y., Gao, L., Gao, Y., & Li, X. (2020) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2020.102083 · Cited by 71
A Machine Vision Apparatus and Method for Can-End Inspection
Chen, T., Wang, Y., Xiao, C., & Wu, Q. M. J. (2016) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2016.2566442 · Cited by 67
“located by choosing defective image blocks with the kernel classifier [14].”
MethodAutomatic Detection of Defects in Tire Radiographic Images
Zhang, Y., Lefebvre, D., & Li, Q. (2015) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2015.2469594 · Cited by 66
“proposed an automatic defect detection method for flat steel using wavelet features derived from contiguous pixel blocks [36].”
MethodAccurate and Efficient Inspection of Speckle and Scratch Defects on Surfaces of Planar Products
Kong, H., Yang, J. J., & Chen, Z. (2017) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2017.2668438 · Cited by 69
Sun, J., Wang, P., Luo, Y., & Li, W. (2019) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2899478 · Cited by 69
“Along with the growing ability of computer systems and digital cameras, the automated visual inspection systems are widely used in various surface inspections, such as rail tracks, optical elements, steel products, and screen glasses [6], [7].”
Defect Detection of Steel Surfaces with Global Adaptive Percentile Thresholding of Gradient Image
Neogi, N., Mohanta, D. K., & Dutta, P. K. (2017) · Journal of The Institution of Engineers (India): Series B · doi:10.1007/s40031-017-0296-2 · Cited by 61
Self-citationWang, Y., Xia, H., Yuan, X., Li, L., & Sun, B. (2018) · Multimedia Tools and Applications · doi:10.1007/s11042-017-5238-0 · Cited by 61
“Steel surface defects can be divided into local defects and distributed defects based on their appearance [16].”
BackgroundMethodSurface Defect Detection of Aeroengine Blades Based on Cross-Layer Semantic Guidance
Song, K., Sun, X., Ma, S., & Yan, Y. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3276026 · Cited by 70
“…learning, the detection method based on deep learning is widely used in the industrial field: surface defect detection of steel (flat steel [10], strip steel [11], and hot-rolled steel [12], [13], [14], [15]), rail defect detection [16], [17], and online estimation for lithium-ion battery [18].”
MethodZhong, H., Fu, D., Xiao, L., Zhao, F., Liu, J., Hu, Y., & Wu, B. (2024) · Advanced Engineering Informatics · doi:10.1016/j.aei.2024.102437 · Cited by 64
EFS-YOLO: a lightweight network based on steel strip surface defect detection
Chen, B., Wei, M., Liu, J., Li, H., Dai, C., Liu, J., & Ji, Z. (2024) · Measurement Science and Technology · doi:10.1088/1361-6501/ad66fe · Cited by 61
Shen, X., Wang, Y., Ma, Y., Li, L., Niu, Y., Yang, Z., & Shi, Y. (2025) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2025.113117 · Cited by 61
Automated detection of defects with low semantic information in X-ray images based on deep learning
Du, W., Shen, H., Fu, J., Zhang, G., Shi, X., & He, Q. (2020) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-020-01566-1 · Cited by 64
Window Feature-Based Two-Stage Defect Identification Using Magnetic Flux Leakage Measurements
Liu, J., Fu, M., Liu, F., Feng, J. Y., & Cui, K. (2017) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2017.2755918 · Cited by 57
“Some observations are summarized as followed: 1) the proposed window features have the best detection accuracy over 80%, which is higher than traditional features in [17] and wavelet features in [18] 2) The greater SN R is, the higher value Recall is.”
MethodInfluentialVision-Based Defect Detection for Mobile Phone Cover Glass using Deep Neural Networks
Yuan, Z., Zhang, Z., Su, H., Zhang, L., Shen, F., & Zhang, F. (2018) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-018-0096-x · Cited by 61
LFRNet: Localizing, Focus, and Refinement Network for Salient Object Detection of Surface Defects
Wan, B., Zhou, X., Zheng, B., Yin, H., Zhu, Z., Wang, H., Sun, Y., Zhang, J., & Yan, C. C. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3250302 · Cited by 72
“Ghorai et al. [18] developed an automatic visual inspection system, which employs kernel classifiers to locate defects.”
BackgroundMethodAn evolutionary classifier for steel surface defects with small sample set
Xiao, M., Jiang, M., Li, G., Xie, L., & Yi, L. (2017) · EURASIP Journal on Image and Video Processing · doi:10.1186/s13640-017-0197-y · Cited by 55
“[4] described an automated visual inspection systemwith discrete wavelet transform (DWT) features and a support vector machine (SVM).”
Cao, G., Ruan, S., Peng, Y., Huang, S., & Kwok, N. M. (2018) · IEEE Access · doi:10.1109/access.2018.2842028 · Cited by 62
Textile fabric defect detection based on low-rank representation
Li, P., Liang, J., Xu-bang, S., Zhao, M., & Sui, L. (2017) · Multimedia Tools and Applications · doi:10.1007/s11042-017-5263-z · Cited by 54
“Industrial defect detection in complicated patterned surfaces [43, 47],such as fabric [21, 36], hot-rolled flat steel [17], composite materials [16], integrated circuits [3, 27, 46], semiconductor wafers [37], LCD [25], solar [44], printed circuit boards [19], SEM images [24] and archive film [45] etc.”
BackgroundSurface defect detection method for glass substrate using improved Otsu segmentation
He, Z., & Sun, L. (2015) · Applied Optics · doi:10.1364/ao.54.009823 · Cited by 51
Defect Detection in Tire X-Ray Images Using Weighted Texture Dissimilarity
Guo, Q., Zhang, C., Liu, H., & Zhang, X. (2016) · Journal of Sensors · doi:10.1155/2016/4140175 · Cited by 49
“Most of existing automatic inspection techniques are focused on textile [1–4], solar wafer [10, 13], and flat steel [14].”
BackgroundA Novel Stereo Vision Measurement System Using Both Line Scan Camera and Frame Camera
Liu, Z., Wu, S., Wu, Q., Quan, C., & Ren, Y. (2018) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2018.2880080 · Cited by 49
A New Self-Reference Image Decomposition Algorithm for Strip Steel Surface Defect Detection
Liu, K., Luo, N., Li, A., Tian, Y. Z., Sajid, H., & Chen, H. (2019) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2952706 · Cited by 52
“[11]”
Ahmed, J., Gao, B., & Woo, W. L. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2020.2994227 · Cited by 48
“Imaging diagnostic using Haar wavelets was proposed for hot-rolled steel defects analysis and quantification [3].”
MethodA Generic Automated Surface Defect Detection Based on a Bilinear Model
Zhou, F., Liu, G., Xu, F., & Deng, H. (2019) · Applied Sciences · doi:10.3390/app9153159 · Cited by 47
Lu, S., Liu, Z., & Shen, Y. (2018) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2018.2790498 · Cited by 48
CASDD: Automatic Surface Defect Detection Using a Complementary Adversarial Network
Tian, S., Huang, P., Ma, H., Wang, J., Zhou, X., Zhang, S., Zhou, J., Huang, R., & Li, Y. (2022) · IEEE Sensors Journal · doi:10.1109/jsen.2022.3202179 · Cited by 50
“Ghorai et al. [15] presented a visual detection system to capture hot-rolled steel surface images, which uses regularized kernel function based on a support vector machine to locate defects.”
MethodChoi, S.-W., Seo, B.-G., & Lee, E. (2023) · Sustainability · doi:10.3390/su15086393 · Cited by 46
A Survey of Vision-Based Methods for Surface Defects’ Detection and Classification in Steel Products
Ibrahim, A. A. M. S., & Tapamo, J. (2024) · Informatics · doi:10.3390/informatics11020025 · Cited by 70
Zhang, X., Kano, M., Tani, M., Mori, J., Ise, J., & Harada, K. (2019) · Control Engineering Practice · doi:10.1016/j.conengprac.2019.104258 · Cited by 46
Gong, R., Wu, C., & Chu, M. (2018) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/j.chemolab.2017.11.018 · Cited by 44
Chu, M., Zhao, J., Liu, X., & Gong, R. (2017) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/j.chemolab.2017.07.008 · Cited by 46
Luo, Q., Su, J., Yang, C., Gui, W., Sílven, O., & Liu, L. (2022) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2022.3165270 · Cited by 55
A Non-Invasive Technique for Online Defect Detection on Steel Strip Surfaces
Bulnes, F. G., García, D. F., de la Calle, F. J., Usamentiaga, R., & Molleda, J. (2016) · Journal of Nondestructive Evaluation · doi:10.1007/s10921-016-0370-8 · Cited by 42
Song, K.-C., Hu, S.-P., Yan, Y.-H., & Li, J. (2014) · ISIJ International · doi:10.2355/isijinternational.54.2598 · Cited by 41
Fast Defect Inspection Based on Data-Driven Photometric Stereo
Ren, M., Wang, X., Xiao, G., Chen, M., & Fu, L. (2018) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2018.2858062 · Cited by 43
“cost technology for the fast detection of the defects on a surface based on the reflection intensity of the surface [9]–[11].”
BackgroundMalaca, P., Rocha, L. F., Gomes, D. R. M., Silva, J., & Veiga, G. M. (2016) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-016-1254-6 · Cited by 40
CABF-YOLO: a precise and efficient deep learning method for defect detection on strip steel surface
Zhou, Q., & Wang, H. (2024) · Pattern Analysis and Applications · doi:10.1007/s10044-024-01252-5 · Cited by 39
“In order to extract the features of defects with periodic texture backgrounds, Gabor transforms [3] and Wavelet transforms [4] transform the image from the spatial domain to the frequency domain.”
Defect Image Sample Generation With Diffusion Prior for Steel Surface Defect Recognition
Tai, Y., Yang, K., Peng, T., Huang, Z., & Zhang, Z. (2024) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2024.3482362 · Cited by 44
Liang, Y., Xu, K., & Zhou, P. (2020) · Sensors · doi:10.3390/s20164519 · Cited by 39
Steel surface defect detection based on MobileViTv2 and YOLOv8
Lv, Z., Zhao, Z., Xia, K., Gu, G., Liu, K., & Chen, X. (2024) · The Journal of Supercomputing · doi:10.1007/s11227-024-06248-w · Cited by 37
YOLOv8-QR: An improved YOLOv8 model via attention mechanism for object detection of QR code defects
Zhao, L., Liu, J., Ren, Y., Lin, C., Liu, J., Abbas, Z., Islam, M. S., & Xiao, G. (2024) · Computers & Electrical Engineering · doi:10.1016/j.compeleceng.2024.109376 · Cited by 38
Surface Defect Detection Based on Gradient LBP
Liu, X., Xue, F., & Lu, T. (2018) · International Conference on Image, Vision and Computing (ICIVC) · doi:10.1109/icivc.2018.8492798 · Cited by 35
“SUB-IMAGE BASED GLBP METHOD In a defect image, under normal circumstances, the gray value of the defect area is quite different from the gray value of the normal area [19-20], the GLBP method proposed in this paper is based on the feature value calculated by the gray gradient, so the output value of the GLBP between d…”
MethodTrack Defect Detection for High-Speed Maglev Trains via Deep Learning
He, Y., Wu, J., Zheng, Y., Zhang, Y., & Hong, X. (2022) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2022.3151165 · Cited by 35
Defect Detection on Rolling Element Surface Scans Using Neural Image Segmentation
Prappacher, N., Bullmann, M., Bohn, G., Deinzer, F., & Linke, A. (2020) · Applied Sciences · doi:10.3390/app10093290 · Cited by 34
“[2] propose a system that to our knowledge allows the finest classification, with 24 classes.”
BackgroundAutomatic Wear Measurement of Pantograph Slider Based on Multiview Analysis
Lu, S., Liu, Z., Li, D., & Shen, Y. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2020.2997724 · Cited by 35
“The most common domains using the computer vision technology include the defect detection of fabric [15], [16], steel [17], [18], castings [19],”
Fault diagnosis for analog circuits utilizing time-frequency features and improved VVRKFA
He, W., He, Y., Luo, Q., & Zhang, C. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aaa33a · Cited by 33
An improved defect recognition framework for casting based on DETR algorithm
Zhang, L., Yan, S.-F., Hong, J., Xie, Q., Zhou, F., & Ran, S.-L. (2023) · Journal of Iron and Steel Research International · doi:10.1007/s42243-023-00920-w · Cited by 33
Internal crack detection of castings: a study based on relief algorithm and Adaboost-SVM
Jin, C., Kong, X., Chang, J., Cheng, H., & Liu, X. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-05368-w · Cited by 34
“Therefore, X-ray detection method has been widely used in industrial fields and also provides more opportunities for the research of defect detection technology [4].”
MethodXu, J., Liu, Y., & Wu, Y. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2021.3096602 · Cited by 38
Metadata
- Authors
- Ghorai, S., Mukherjee, A., Gangadaran, M., & Dutta, P. K.
- Affiliations
- Heritage Institute of Technology (IN)
- Indian Institute of Technology Kharagpur (IN)
- Steel Authority of India Limited (IN)
- Venue
- IEEE Transactions on Instrumentation and Measurement
- Published
- 2013-03
- Volume
- 62
- Issue
- 3
- Pages
- 612-621
- ISSN
- 0018-9456 (ISSN-L)
- 1557-9662
- OpenAlex
- W2078087367
- Cited by
- 317
- References
- 24
- Citations by year
- 2026: 13 · 2025: 26 · 2024: 46 · 2023: 46 · 2022: 36 · 2021: 23 · 2020: 33 · 2019: 25 · 2018: 22 · 2017: 17 · 2016: 12 · 2015: 8 · 2014: 5 · 2013: 5
- FWCI
- 14.16
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- IEEE Transactions on Instrumentation and Measurement (publishedVersion)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Industrial Vision Systems and Defect Detection
- Physical Sciences › Engineering › Mechanical Engineering › Non-Destructive Testing Techniques
- Physical Sciences › Engineering › Civil and Structural Engineering › Infrastructure Maintenance and Monitoring
- Keywords
- automated defect detection, steel surface defects, wavelet features, Haar wavelet, Daubechies wavelet, multiwavelets, support vector machine, visual inspection system, defect localization, texture segmentation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.