Short-Frequency Fourier Transform for Fault Diagnosis of Induction Machines Working in Transient Regime
Open accessThe DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Abstract
Transient-based methods for fault diagnosis of induction machines (IMs) are attracting a rising interest, due to their reliability and ability to adapt to a wide range of IM's working conditions. These methods compute the time-frequency (TF) distribution of the stator current, where the patterns of the related fault components can be detected. A significant amount of recent proposals in this field have focused on improving the resolution of the TF distributions, allowing a better discrimination and identification of fault harmonic components. Nevertheless, as the resolution improves, computational requirements (power computing and memory) greatly increase, restricting its implementation in low-cost devices for performing on-line fault diagnosis. To address these drawbacks, in this paper, the use of the short-frequency Fourier transform (SFFT) for fault diagnosis of induction machines working under transient regimes is proposed. The SFFT not only keeps the resolution of traditional techniques, such as the short-time Fourier transform, but also achieves a drastic reduction of computing time and memory resources, making this proposal suitable for on-line fault diagnosis. This method is theoretically introduced and experimentally validated using a laboratory test bench.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“e proposed method greatly reduced the computing time and memory resources.”
From Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review (2021) · cites this paper as [119]
Citations
Cites
Time-frequency distributions-a review
Cohen, L. (1989) · Proceedings of the IEEE · doi:10.1109/5.30749 · Cited by 3,571 · cited 1×
“In other words, the non-stationary signal can b e considered as locally stationary, and then can be transform ed into the time-frequency domain [27],”
Background(2009) · Encyclopedia of Neuroscience · doi:10.1007/978-3-540-29678-2_6014 · Cited by 2,850
(1996) · Adapted Wavelet Analysis · doi:10.1201/9781439863619-15 · Cited by 2,703
A Review on Basic Data-Driven Approaches for Industrial Process Monitoring
Yin, S., Ding, S. X., Xie, X., & Luo, H. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2301773 · Cited by 1,716 · cited 1×
“So, there is a growing interest in on-line condition monitoring methods [1], [2], whose main goal is to detect a fault at its early state without”
BackgroundWavelets for fault diagnosis of rotary machines: A review with applications
Yan, R., Gao, R. X., & Chen, X. (2014) · Signal Processing · doi:10.1016/j.sigpro.2013.04.015 · Cited by 1,446 · cited 1×
“These drawbacks have a major impact in transientbased fault diagnosis methods, which require advanced and complex signal processing tools such as the STFT [13], [14], the wavelet transform [15], [16], the empirical mode decomposition [17], [18], the Wigner Ville distribution (W VD) [19], among many others.”
MethodChen, J., Pan, J., Li, Z., Zi, Y., & Chen, X. (2016) · Renewable Energy · doi:10.1016/j.renene.2015.12.010 · Cited by 361 · cited 1×
“These drawbacks have a major impact in transientbased fault diagnosis methods, which require advanced and complex signal processing tools such as the STFT [13], [14], the wavelet transform [15], [16], the empirical mode decomposition [17], [18], the Wigner Ville distribution (W VD) [19], among many others.”
MethodGeneral Parameterized Time-Frequency Transform
Yang, Y., Peng, Z. K., Dong, X. J., Zhang, W. M., & Meng, G. (2014) · IEEE Transactions on Signal Processing · doi:10.1109/tsp.2014.2314061 · Cited by 219
Cabal-Yepez, E., Garcia-Ramirez, A. G., Romero-Troncoso, R. J., Garcia-Perez, A., & Osornio-Rios, R. A. (2013) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2012.2221131 · Cited by 177 · cited 2×
“transform (STFT) [13], [14], the wavelet transform [15], [16], the empirical mode decomposition [17], [18], the Wigner Ville distribution (WVD) [19], among many others.”
BackgroundMethodDetection of Eccentricity Faults in Induction Machines Based on Nameplate Parameters
Nandi, S., Ilamparithi, T. C., Lee, S. B., & Hyun, D. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2055772 · Cited by 154 · cited 1×
“transform (STFT) [13], [14], the wavelet transform [15], [16], the empirical mode decomposition [17], [18], the Wigner Ville distribution (WVD) [19], among many others.”
MethodGao, H., Liang, L., Chen, X., & Xu, G. (2014) · Chinese Journal of Mechanical Engineering · doi:10.3901/cjme.2014.1103.166 · Cited by 146 · cited 1×
“The STFT of currents and vibrations has been extensively used for detecting, in transient regime, different types of IM’s faults such as rotor broken bars or damaged bearings [33], among others.”
Background
Cited by
Li, X., Zhang, W., & Ding, Q. (2019) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2018.11.011 · Cited by 582
Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review
Mohd Ghazali, M. H., & Rahiman, W. (2021) · Shock and Vibration · doi:10.1155/2021/9469318 · Cited by 249
“To avoid cross-term effects, Burriel-Valencia et al. [119] implemented the STFT method for fault diagnosis of induction machines, where the spectrums in the frequency domain in the relevant frequency band are filtered. proposed method greatly reduced the computing time and memory resources.”
MethodKnowledge Transfer for Rotary Machine Fault Diagnosis
Yan, R., Shen, F., Sun, C., & Chen, X. (2020) · IEEE Sensors Journal · doi:10.1109/jsen.2019.2949057 · Cited by 245
“For example, Burriel-Valencia et al. [126] promoted the Fourier transform to short-frequency Fourier transform for fault diagnosis of induction machines working in transient regime.”
BackgroundA Hybrid Feature Model and Deep-Learning-Based Bearing Fault Diagnosis
Sohaib, M., Kim, C.-H., & Kim, J.-M. (2017) · Sensors · doi:10.3390/s17122876 · Cited by 200
“The nonstationary behavior can be explored by various time–frequency analysis techniques, including the Wigner Ville distribution (WVD) [24], short time Fourier transform (STFT) [25–27], and wavelet packet transform (WPT) [28,29].”
MethodRahimilarki, R., Gao, Z., Jin, N., & Zhang, A. (2021) · Renewable Energy · doi:10.1016/j.renene.2021.12.056 · Cited by 152
Remaining Useful Life Prediction With Partial Sensor Malfunctions Using Deep Adversarial Networks
Li, X., Xu, Y., Li, N., Yang, B., & Lei, Y. (2022) · IEEE/CAA Journal of Automatica Sinica · doi:10.1109/jas.2022.105935 · Cited by 145
“The scoring function defined in (8) has been popularly used in the prognostic studies on the C-MAPSS dataset in [41]–[43].”
MethodTransfer Relation Network for Fault Diagnosis of Rotating Machinery With Small Data
Lü, N., Hu, H., Yin, T., Lei, Y., & Wang, S. (2021) · IEEE Transactions on Cybernetics · doi:10.1109/tcyb.2021.3085476 · Cited by 141
“The widely used feature extraction methods include Fourier transform [12], Wavelet analysis [13], empirical mode decomposition (EMD) [14], spectrum and statistical characteristics [15], locally weighted projection regression (LWPR) [16], parity vector [17], and so on.”
MethodThe numerical modeling of rotor–stator rubbing in rotating machinery: a comprehensive review
Prabith, K., & Krishna, I. R. P. (2020) · Nonlinear Dynamics · doi:10.1007/s11071-020-05832-y · Cited by 136
“This is achieved by utilizing two STFT representations, one with a Gaussian window and the other with the first derivative of the Gaussian window.”
MethodInfluentialFault Diagnosis of High-Speed Train Bogie Based on the Improved-CEEMDAN and 1-D CNN Algorithms
Huang, D., Li, S., Qin, N., & Zhang, Y. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.3047922 · Cited by 140
“…equipment are usually nonlinear and nonstationary, time-frequency analysis meth-ods are frequently used to extract the signal characteristics, e.g., short-time Fourier transform (STFT) [5], [6], wavelet transform (WT) [7], [8], empirical mode decomposition (EMD), and Hilbert transform [9]–[11].”
MethodKnowledge and data dual-driven transfer network for industrial robot fault diagnosis
Yin, T., Lü, N., Guo, G., Lei, Y., Wang, S., & Guan, X. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2022.109597 · Cited by 101
Degradation Alignment in Remaining Useful Life Prediction Using Deep Cycle-Consistent Learning
Li, X., We, Z., Ma, H., Luo, Z., & Li, X. (2021) · IEEE Transactions on Neural Networks and Learning Systems · doi:10.1109/tnnls.2021.3070840 · Cited by 102
“With respect to the collected raw vibration acceleration data, short-time Fourier transform (STFT) is adopted to obtain the time–frequency domain information for preprocessing [40].”
MethodAlShorman, O., Irfan, M., Abdelrahman, R. B., Masadeh, M., Alshorman, A. M., Sheikh, M. A., Saad, N. B., & Rahman, S. (2023) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2023.107724 · Cited by 89
Broken Rotor Bars Detection in Induction Motors Running at Very Low Slip Using a Hall Effect Sensor
Dias, C. G., & Pereira, F. H. (2018) · IEEE Sensors Journal · doi:10.1109/jsen.2018.2827204 · Cited by 77
Construction of a Hierarchical Feature Enhancement Network and Its Application in Fault Recognition
Chen, Z., Lu, H., Tian, S., Qiu, J., Kamiya, T., Serikawa, S., & Xu, L. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2020.3021688 · Cited by 75
“Typicalmethodsincludetheshort-timeFouriertransform[18], Wigner Ville distribution [19], and wavelet transform (WT) [20].”
BackgroundDing, X., Li, Q., Lin, L., He, Q., & Shao, Y. (2019) · Measurement · doi:10.1016/j.measurement.2019.04.030 · Cited by 70
Fault diagnosis of rotating machinery based on dual convolutional-capsule network (DC-CN)
Li, D., Zhang, M., Kang, T., Li, B., Xiang, H., Wang, K., Pei, Z., Tang, X., & Wang, P. (2021) · Measurement · doi:10.1016/j.measurement.2021.110258 · Cited by 64
Rolling Bearing Fault Diagnosis Based on an Improved HTT Transform
Pang, B., Tang, G., Tian, T., & Zhou, C. (2018) · Sensors · doi:10.3390/s18041203 · Cited by 64
“Time–frequency domain approaches, such as short-time Fourier transform [27], wavelet transform [28], and Hilbert Huang transform [29], have been shown to be more suitable for extracting non-stationary and time-varying fault feature information [30].”
MethodJiang, S. B., Wong, P. K., Guan, R., Liang, Y., & Li, J. (2019) · IEEE Access · doi:10.1109/access.2019.2895909 · Cited by 60
Yu, S., Pang, S., Ning, J., Wang, M., & Song, L. (2024) · Expert Systems with Applications · doi:10.1016/j.eswa.2024.125937 · Cited by 59
Burriel-Valencia, J., Puche‐Panadero, R., Martínez‐Román, J., Sapena-Bañó, Á., Pineda‐Sanchez, M., Pérez‐Cruz, J., & Riera‐Guasp, M. (2018) · Electronics · doi:10.3390/electronics8010006 · Cited by 54
“Nevertheless, as explained in [6], a SFFT transform can be used instead STFT, obtaining the same t-f spectrum.”
MethodSelf-citationPrognostics and health management for induction machines: a comprehensive review
Huang, C., Bu, S., Lee, H. H., Chan, K. W., & Yung, W. K. C. (2023) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-023-02103-6 · Cited by 53
“STFT can process non-stationary signals with a moving window, but it produces constant resolution for all frequencies as it adopts the same window (Burriel-Valencia et al., 2017).”
Sohaib, M., & Kim, J.-M. (2018) · Shock and Vibration · doi:10.1155/2018/2919637 · Cited by 52
Barrera, K., Burriel-Valencia, J., Sapena-Bañó, Á., & Martínez‐Román, J. (2023) · Sensors · doi:10.3390/s23198196 · Cited by 50
“Additionally, short fourier transform (SFT) has been utilized to diagnose faults in transient induction machines [2].”
MethodSelf-citationNon-parallel least squares support matrix machine for rolling bearing fault diagnosis
Li, X., Yang, Y., Pan, H., Cheng, J., & Cheng, J. (2019) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2019.103676 · Cited by 50
Damage Localization of Stacker’s Track Based on EEMD-EMD and DBSCAN Cluster Algorithms
Li, S., Qin, N., Huang, D., Huang, D., & Ke, L. (2019) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2919375 · Cited by 49
“So far, various methodologies have been proposed to extract feature values of signal, such as fast Fourier transform (FFT) [9], short-time Fourier transform (STFT) [10], WT [7], [11], [12], empirical mode decomposition (EMD) [13], [14], and ensemble EMD (EEMD) [15].”
MethodInfluentialFault diagnosis of mine asynchronous motor based on MEEMD energy entropy and ANN
Yang, Z., Kong, C., Wang, Y., Rong, X., & Wei, L. (2021) · Computers & Electrical Engineering · doi:10.1016/j.compeleceng.2021.107070 · Cited by 48
Induction machine model with space harmonics for fault diagnosis based on the convolution theorem
Sapena-Bañó, Á., Martínez‐Román, J., Puche‐Panadero, R., Pineda‐Sanchez, M., Pérez‐Cruz, J., & Riera‐Guasp, M. (2018) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2018.03.001 · Cited by 46
Self-citationUncertainty-Aware Fault Diagnosis Under Calibration
Lin, Y., & Li, G.-H. (2024) · IEEE Transactions on Systems Man and Cybernetics Systems · doi:10.1109/tsmc.2024.3427345 · Cited by 44
“To reduce noise and redundant information, they are usually combined with the feature extraction modules to retain relevant information, such as empirical model decomposition [4], Fourier transform [5], and wavelet transform [6], which can extract representative features for fault diagnosis.”
MethodSapena-Bañó, Á., Chinesta, F., Pineda-Sanchez, M., Aguado, J. V., Borzacchiello, D., & Puche-Panadero, R. (2019) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2019.03.020 · Cited by 42
Self-citationWavelet packet and fuzzy logic theory for automatic fault detection in induction motor
Talhaoui, H., Ameid, T., Aissa, O., & Kessal, A. (2022) · Soft Computing · doi:10.1007/s00500-022-07028-5 · Cited by 42
Yu, Q., Yang, Y., Tang, A., Wu, Z., Xu, Y., Shen, W., & Zhou, F. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.115194 · Cited by 40
Upper Sweeping Frequency Selection for Cable Defect Location Based on STFT
Huang, J., Zhou, K., Xu, Y., Meng, P., Tang, Z., & Liang, Z. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3271718 · Cited by 38
“gram [18], [19], [20], [21], [22], [23].”
Fu, W., Jiang, X., Tan, C., Li, B., & Chen, B. (2022) · IEEE Sensors Journal · doi:10.1109/jsen.2022.3160762 · Cited by 37
Atta, M. E. E.-D., Ibrahim, D. K., & Gilany, M. I. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2021.3084301 · Cited by 35
“Meanwhile, a novel method is proposed in [7] to improve the performance of STFT by filtering the current spectrum in the frequency domain but an expert user is required to design such filter.”
MethodRobotic Grinding Process Monitoring by Vibration Signal Based on LSTM Method
Zhao, X., Lu, H., Yu, W., Tao, B., & Ding, H. (2022) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2022.3210978 · Cited by 35
“The signal processing methods based on time domain and frequency domain are commonly used, such as statistical analysis [3], time-domain waveform [4], Fourier transform [5], [6], wavelet transforms [7], [8], and Hilbert–Huang transform [9], [10], etc.”
MethodDing, X., He, Q., Shao, Y., & Huang, W. (2019) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2018.2890316 · Cited by 34
“Another two feature extraction methods, including short-frequency analysis [16] and time– frequency analysis (TFA) [17], are widely used in signal denoising as the famous time–frequency (TF) domain denoising methods by combining time and frequency information together.”
MethodHmida, M. A., & Braham, A. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.2993107 · Cited by 34
“[9] proposed a new 2-D T-F technique called the short-frequency Fourier transform (SFFT) for detecting a BRB fault in a”
MethodSharma, R. R., & Pachori, R. B. (2018) · Circuits Systems and Signal Processing · doi:10.1007/s00034-018-0846-0 · Cited by 33
“A fast computation methodology with keeping resolution as given by STFT for getting TFR based on short frequency FT is recently proposed [12].”
MethodA Real-Time Fault Early Warning Method for a High-Speed EMU Axle Box Bearing
Liu, L., Song, D., Geng, Z., & Zheng, Z. (2020) · Sensors · doi:10.3390/s20030823 · Cited by 32
A Smart Sensor-Based cEMD Technique for Rotor Bar Fault Detection in Induction Motors
Mahmud, M., & Wang, W. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2021.3107009 · Cited by 31
Jiang, Y. X., & Niu, G. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2022.109329 · Cited by 31
Du, W., Zhu, P., Pu, Z., Gong, X., & Li, C. (2023) · Measurement · doi:10.1016/j.measurement.2023.113985 · Cited by 32
Qin, N., Wang, T., Huang, D., You, Y., & Zhang, Y. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3263226 · Cited by 29
“As such, the effectiveness of data-driven methods is heavily affected by the performance of feature extracting, where the typical ways include fast Fourier transform (FFT) [11], short-time Fourier transform (STFT) [21], and wavelet transform (WT) [22], [23].”
BackgroundJiang, Y., Ji, B., Zhang, J., Yan, J., & Li, W. (2024) · World Electric Vehicle Journal · doi:10.3390/wevj15040165 · Cited by 29
“The use of short-frequency Fourier transform (SFFT) for motor fault diagnosis in non-stationary states was shown to enhance computational efficiency [96].”
BackgroundFault Detection in Induction Machines Using Learning Models and Fourier Spectrum Image Analysis
Barrera, K., Burriel-Valencia, J., Sapena-Bañó, Á., & Martínez‐Román, J. (2025) · Sensors · doi:10.3390/s25020471 · Cited by 32
Self-citationDu, Y., Geng, X., Zhou, Q., & Cheng, S. (2024) · Ocean Engineering · doi:10.1016/j.oceaneng.2024.119101 · Cited by 27
Wang, P., Kaixuan, W., & Chen, L. (2023) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2022.3225851 · Cited by 23
“Similarly, the short-frequency Fourier transform [23] not only improved the time-frequency resolution but also achieved a drastic reduction of computing time and memory resources.”
BackgroundMethodA Neuro-Fuzzy Approach for Locating Broken Rotor Bars in Induction Motors at Very Low Slip
Dias, C. G., & de Sousa, C. M. (2018) · Journal of Control Automation and Electrical Systems · doi:10.1007/s40313-018-0388-5 · Cited by 23
An evolutionary ensemble convolutional neural network for fault diagnosis problem
Najaran, M. H. T. (2023) · Expert Systems with Applications · doi:10.1016/j.eswa.2023.120678 · Cited by 24
Liu, R., Ding, X., Shao, Y., & Huang, W. (2024) · Advanced Engineering Informatics · doi:10.1016/j.aei.2024.102421 · Cited by 22
Sapena-Bañó, Á., Chinesta, F., Puche‐Panadero, R., Martínez‐Román, J., & Pineda‐Sanchez, M. (2020) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2020.106417 · Cited by 21
Self-citationZheng, H., Liu, H., Liu, Z., & Tan, J. (2024) · Advanced Engineering Informatics · doi:10.1016/j.aei.2024.102432 · Cited by 24
Automated Lightweight Model for Asthma Detection Using Respiratory and Cough Sound Signals
Xu, S., Deo, R. C., Faust, O., Barua, P. D., Soar, J., & Acharya, R. (2025) · Diagnostics · doi:10.3390/diagnostics15091155 · Cited by 22
“The primary feature of this signal comprises a series of Fourier transforms of a windowed signal with the window being shifted along the time axis for each calculation stage [16].”
Intelligent Agricultural Machinery Using Deep Learning
Thomas, G., Balocco, S., Mann, D., Simundsson, A., & Khorasani, N. (2021) · IEEE Instrumentation & Measurement Magazine · doi:10.1109/mim.2021.9400957 · Cited by 19
Precise Diagnosis of Unknown Fault of High-Speed Train Bogie Using Novel FBM-Net
Zhang, Y., Qin, N., Huang, D., & Du, J. (2022) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2022.3180410 · Cited by 24
“Considering the nonlinear and nonstationary characteristics of vibration signals of bogie, signal processing methods are frequently adopted to extract the signal features, such as short-time Fourier transform (STFT) [10], [11], wavelet transform (WT) [12], empirical mode decomposition (EMD) [13], and the Hilbert 1557-…”
MethodSamanta, I. S., Rout, P. K., & Mishra, S. (2021) · Electrical Engineering · doi:10.1007/s00202-021-01243-3 · Cited by 18
Induction Machine Fault Diagnosis With Quadratic Time–Frequency Distributions: State of the Art
Vitor, A. L. O., Goedtel, A., Castoldi, M. F., de Souza, W. A., & Bazan, G. H. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3323999 · Cited by 19
Ding, J., Wang, Y., Qin, Y., & Tang, B. (2024) · Advanced Engineering Informatics · doi:10.1016/j.aei.2024.103048 · Cited by 18
A Fault Feature Extraction Method Based on Improved VMD Multi-Scale Dispersion Entropy and TVD-CYCBD
Yang, J., Zhou, C., Li, X., Pan, A., & Yang, T. (2023) · Entropy · doi:10.3390/e25020277 · Cited by 17
“[10] used SFFT to diagnose faults in induction motors operating under transient conditions.”
MethodFault Diagnosis of Bearings Using Wavelet Packet Energy Spectrum and SSA-DBN
Qu, J., Cheng, X., Liang, P., Zheng, L., & Ma, X. (2023) · Processes · doi:10.3390/pr11071875 · Cited by 17
“Time-frequency analysis methods can effectively separate signals from Gaussian noise, extract fault characteristic information from the interference signal, and provide a powerful tool for bearing fault diagnoses [21–23].”
BackgroundVununu, C., Moon, K.-S., Lee, S., & Kwon, K. (2018) · Sensors · doi:10.3390/s18082634 · Cited by 17
“[18], STFT was used for the monitoring system of induction machines, like also in the works by Cabal-Yepez et al.”
MethodSamanta, I. S., Rout, P. K., & Mishra, S. (2019) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-019-04289-5 · Cited by 16
Yang, H., Zhou, Y., & Zhao, J. (2020) · Journal of Power Electronics · doi:10.1007/s43236-020-00043-5 · Cited by 16
Wang, L., Li, H., Tao, X., & Wei, S. (2023) · Sensors · doi:10.3390/s23239441 · Cited by 15
“Recently, signal decomposition methods, such as the short-time Fourier transform (STFT) [17,18], discrete wavelet transform (DWT) [19,20], and ensemble empirical mode decomposition (EEMD) [21] methods, have been introduced.”
MethodFu, W., Zheng, B., Li, S., Liao, W., Huang, Y., & Chen, X. (2024) · Measurement Science and Technology · doi:10.1088/1361-6501/ad8673 · Cited by 15
“For example, techniques such as short-time Fourier transform [6], wavelet transforms [7], and empirical mode decomposition [8] are utilized.”
Zhang, H.-Y., Xu, W., Peng, Q.-Y., Wang, D., Jiang, C., & Li, W. (2025) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2025.3603285 · Cited by 15
“Signal-based prediction models extract features from the acquired vibration signals through time-domain [26], [27], and time-frequency domain [23], [24], [25] analyses.”
Application of Multiple Parks Vector Approach for Detection of Multiple Faults in Induction Motors
Vilhekar, T. G., Ballal, M. S., & Suryawanshi, H. M. (2017) · Journal of Power Electronics · Cited by 15
Partial Inductance Model of Induction Machines for Fault Diagnosis
Pineda‐Sanchez, M., Puche‐Panadero, R., Martínez‐Román, J., Sapena-Bañó, Á., Riera‐Guasp, M., & Pérez‐Cruz, J. (2018) · Sensors · doi:10.3390/s18072340 · Cited by 15
“In Section 3, the partial inductance of a single conductor is obtained through its MVP, and in Section 4 the FFT is used for assembling the matrices of self and mutual inductances of the machine, combining the partial inductances of the phases’s conductors.”
BackgroundSelf-citationDesign of a progressive fault diagnosis system for hydropower units considering unknown faults
Chen, J., Zheng, Y., Deng, X., Wang, Y., Hu, W., & Xiao, Z. (2023) · Measurement Science and Technology · doi:10.1088/1361-6501/ad01cf · Cited by 14
“The time–frequency analysis methods are the popular methods for processing nonlinear and non-stationary signals [7–9], such as short-time Fourier transform [10], wavelet transform [11], empirical mode decomposition (EMD), ensemble EMD (EEMD) [12, 13] etc.”
Yang, C., Wu, Z., Peng, T., Zhu, H., & Yang, C. (2020) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.2994216 · Cited by 14
“In particular, the TF of motor is diagnosed by the space vector feature analysisbased [23] and short frequency Fourier transform-based [24].”
BackgroundZhang, X., Liu, B., Ma, R., Wan, H., Wang, C., & Chen, X. (2024) · Structural Health Monitoring · doi:10.1177/14759217231220220 · Cited by 12
Wu, X., Li, M., Geng, Y., & Qian, H. (2024) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2024.3522658 · Cited by 14
“Most of the traditional feature extraction methods use signal processing technology to filter the key information, for example, Fourier transform [8], wavelet transform [9], mode decomposition [10], and so on.”
Motor Bearing Fault Diagnosis in an Industrial Robot Under Complex Variable Speed Conditions
Gong, T., Wang, Z., Ma, Q., & Yang, J. (2023) · Journal of Computational and Nonlinear Dynamics · doi:10.1115/1.4064250 · Cited by 12
Early Fault Detection via Multiple Feature Fusion and Ensemble Learning
Song, W., Wu, D., Shen, W., & Boulet, B. (2024) · IEEE Sensors Journal · doi:10.1109/jsen.2024.3353732 · Cited by 12
“TFD feature extraction methods include short-time Fourier transform (STFT) [20] and continuous wavelet transform (CWT) [21].”
MethodCross-term suppression in the Wigner-Ville distribution using variational mode decomposition
Meena, P., Sharma, R. R., & Pachori, R. B. (2019) · International Conference on Signal Processing, Computing and Control (ISPCC) · doi:10.1109/ispcc48220.2019.8988344 · Cited by 12
“A short frequency Fourier transform (FT) based fast computation technique for getting resolution like as STFT is presented in recent years [2].”
MethodWan, W., Chen, J., & Xie, J. (2023) · IEEE Transactions on Intelligent Transportation Systems · doi:10.1109/tits.2023.3316793 · Cited by 11
“Traditional diagnostic techniques involve the extraction of fault features from either the time domain, the frequency domain, or both [3], [4], [5].”
BackgroundAn Open-switch Fault Diagnosis Method for Single-phase PWM Rectifier Based on CEEMD-DNN
Qin, N., Wang, T., Huang, D., Zhang, Y., & Ma, L. (2023) · International Journal of Control Automation and Systems · doi:10.1007/s12555-021-0905-3 · Cited by 13
“Noting that STFT and WT are subjective since both of the window functions need to be preset, EMD [17,18] and two improved versions of EMD, EEMD [19] and CEEMD [20], are proposed to further degrade the sub-jectivity in analyzing nonlinear non-stationary timing signal.”
MethodInfluentialWang, T., Xu, X. Y., & Hong-xia, P. (2024) · ISA Transactions · doi:10.1016/j.isatra.2023.12.045 · Cited by 11
Xie, J., Lin, M., Yang, B., Guo, Z., Jiang, X., & Wang, T. (2023) · Measurement Science and Technology · doi:10.1088/1361-6501/acdc45 · Cited by 11
Multi-Band Frequency Window for Time-Frequency Fault Diagnosis of Induction Machines
Burriel-Valencia, J., Puche‐Panadero, R., Martínez‐Román, J., Sapena-Bañó, Á., Riera‐Guasp, M., & Pineda‐Sanchez, M. (2019) · Energies · doi:10.3390/en12173361 · Cited by 11
Self-citationLi, M., Wang, Z., Zhang, Y., & Gao, P. (2023) · IEEE Sensors Journal · doi:10.1109/jsen.2023.3336307 · Cited by 10
“When using machine-learning methods to diagnose faults, it is necessary to extract artificial features from them, such as short-time Fourier transform [9], K -singular value decomposition [10], empirical mode decomposition [11], wavelet transform [12], and so on.”
MethodThe Intelligent Monitoring Technology for Machining Thin-Walled Components: A Review
Liu, G., Wang, Y., Huang, B., & Ding, W. (2024) · Machines · doi:10.3390/machines12120876 · Cited by 10
Rolling bearing fault diagnosis method based on PE-DCM and ViT
Hui, Y., Xu, K., Chen, P., & Zhao, X. (2024) · Measurement Science and Technology · doi:10.1088/1361-6501/ad5eab · Cited by 10
“By combining time and frequency information, the time-frequency analysis method is particularly suitable for analyzing non-stationary signals, including Wavelet Transform [5], Short-Time Fourier Transform (STFT) [6], Hilbert–Huang Transform [7] and Wigner–Ville Distribution [8].”
Sharma, R. R., Meena, P., & Pachori, R. B. (2020) · Advances in intelligent systems and computing · doi:10.1007/978-981-15-2740-1_18 · Cited by 9
Terron-Santiago, C., Martínez‐Román, J., Puche‐Panadero, R., & Sapena-Bañó, Á. (2021) · Sensors · doi:10.3390/s21216963 · Cited by 9
“They would also be very helpful to train expert systems [10], to develop vector classifiers [11], to obtain a comprehensive understanding of the observed phenomena and to define and compare different fault indexes [12].”
BackgroundMethodSelf-citationChen, J., & Zou, S. (2018) · Applied Sciences · doi:10.3390/app8050838 · Cited by 8
“However, in practice, it is usually difficult to decide the windowing function and the window length, for a better reflection of the signal spectrum [12].”
BackgroundResearch on Rolling Bearing Fault Diagnosis Method Based on Improved LMD and CMWPE
Song, E., Feng, G., Yao, C., & Ke, Y. (2021) · Journal of Failure Analysis and Prevention · doi:10.1007/s11668-021-01226-3 · Cited by 8
“The core of mechanical fault diagnosis is feature extraction, various signal processing approaches including Short Time Fourier Transform (STFT) [2], Wigner–Ville distribution (WVD) [3], and wavelet transform (WT) [4] are generally utilized in the field of feature extraction of mechanical fault diagnosis and have atta…”
MethodAnalysis of possible faults and diagnostic methods of the Cartesian industrial robot
Autsou, S., Rassõlkin, A., Vaimann, T., & Kudelina, K. (2022) · Proceedings of the Estonian Academy of Sciences · doi:10.3176/proc.2022.3.04 · Cited by 8
Local Feature Augmented Graph Transformer for Enhanced Industrial Process Fault Diagnosis
Qi, Y., Yao, L., Shen, B., Zhu, Z., Zeng, J., Chai, Y., & Song, Z. (2025) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2025.3612657 · Cited by 7
“Signal processing techniques (such as wavelet analysis, Fourier transforms [10], [11]) also struggle to simultaneously handle the structural complexity and sample scarcity inherent in such data.”
Yang, X., Li, H., Yan, J., & He, R. (2025) · Electronics · doi:10.3390/electronics14081656 · Cited by 7
An improved two-stream compression convolution network for rolling bearing fault diagnosis
Jin, H., Ma, W., Meng, Z., Sun, D., Cao, W., & Fan, F. (2022) · Measurement Science and Technology · doi:10.1088/1361-6501/ac900c · Cited by 7
“Traditional feature extraction methods commonly include short-time Fourier transform [9],”
Ouadah, M., Touhami, O., & Ibtiouen, R. (2018) · Electrical Engineering · doi:10.1007/s00202-018-0728-2 · Cited by 7
Zhu, H., Jia, Z., Song, X., & Sun, W. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-08829-6 · Cited by 7
“After adopting the notch filtering technique that reduces the interference of the cross term, Wigner–Ville distribution is used to describe the change of fault characteristic harmonic energy density with slip s [14, 19].”
MethodBarrera, K., Burriel-Valencia, J., Sapena-Bañó, Á., & Martínez‐Román, J. (2025) · Measurement · doi:10.1016/j.measurement.2025.119892 · Cited by 6
Self-citationBai, R., Wang, H., Sun, W., Li, H., Shi, Y., Xu, Q. Y., Wang, Y., & Chen, X. (2025) · Scientific Reports · doi:10.1038/s41598-025-98806-2 · Cited by 6
Martínez‐Román, J., Puche‐Panadero, R., Sapena-Bañó, Á., Burriel-Valencia, J., Riera‐Guasp, M., & Pineda‐Sanchez, M. (2022) · Measurement · doi:10.1016/j.measurement.2021.110690 · Cited by 6
Self-citationManikandan, R., & Singh, R. R. (2023) · Circuit World · doi:10.1108/cw-09-2022-0241 · Cited by 6
Li, Q., Ding, X., Wang, T., Zhang, M., Huang, W., & Shao, Y. (2019) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/0954406219897688 · Cited by 6
A review on dependency matrix and its application in fault diagnosis
Li, X., Cui, W., Li, L., & Yang, J. N. (2022) · Global Reliability and Prognostics and Health Management Conference (PHM) · doi:10.1109/phm-yantai55411.2022.9941798 · Cited by 6
“The Fourier transform [6], wavelet transform [7], and Hilbert transform [8] are widely utilized in feature extraction.”
MethodNonlinear Dispersive Component Decomposition: Algorithm and Applications
Lv, M., & Li, H. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2021.3072105 · Cited by 5
“Similar to the definition of short-time Fourier transform, the definition of short-frequency Fourier transform is shown as [26] (33)”
Method
Metadata
- Authors
- Burriel-Valencia, J., Puche-Panadero, R., Martinez-Roman, J., Sapena-Bano, A., & Pineda-Sanchez, M.
- Affiliations
- Universitat Politècnica de València (ES)
- Venue
- IEEE Transactions on Instrumentation and Measurement
- Published
- 2017-03
- Volume
- 66
- Issue
- 3
- Pages
- 432-440
- ISSN
- 0018-9456 (ISSN-L)
- 1557-9662
- OpenAlex
- W2582337578
- Cited by
- 144
- References
- 36
- Citations by year
- 2026: 11 · 2025: 14 · 2024: 20 · 2023: 24 · 2022: 17 · 2021: 16 · 2020: 11 · 2019: 14 · 2018: 14 · 2017: 3
- FWCI
- 7.22
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Locations
- IEEE Transactions on Instrumentation and Measurement (publishedVersion)
- RiuNet (Universitat Politècnica de València) (submittedVersion, cc-by-nc-nd)
- Funders
- Spanish Ministerio de Economía y Competitividad in the framework of the Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad (DPI2014-60881-R)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Sensorless Control of Electric Motors
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Motor Design and Analysis
- Keywords
- induction motor, fault diagnosis, transient regime, time-frequency representation, stator current, real-time fault diagnosis, computational efficiency, low-cost implementation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.