Short-Frequency Fourier Transform for Fault Diagnosis of Induction Machines Working in Transient Regime
Open accessThe DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Abstract
Transient-based methods for fault diagnosis of induction machines (IMs) are attracting a rising interest, due to their reliability and ability to adapt to a wide range of IM's working conditions. These methods compute the time-frequency (TF) distribution of the stator current, where the patterns of the related fault components can be detected. A significant amount of recent proposals in this field have focused on improving the resolution of the TF distributions, allowing a better discrimination and identification of fault harmonic components. Nevertheless, as the resolution improves, computational requirements (power computing and memory) greatly increase, restricting its implementation in low-cost devices for performing on-line fault diagnosis. To address these drawbacks, in this paper, the use of the short-frequency Fourier transform (SFFT) for fault diagnosis of induction machines working under transient regimes is proposed. The SFFT not only keeps the resolution of traditional techniques, such as the short-time Fourier transform, but also achieves a drastic reduction of computing time and memory resources, making this proposal suitable for on-line fault diagnosis. This method is theoretically introduced and experimentally validated using a laboratory test bench.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“e proposed method greatly reduced the computing time and memory resources.”
From Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review (2021) · cites this paper as [119]
Citations
Cites
Time-frequency distributions-a review
Cohen, L. (1989) · Proceedings of the IEEE · doi:10.1109/5.30749 · Cited by 3,571 · cited 1×
“In other words, the non-stationary signal can b e considered as locally stationary, and then can be transform ed into the time-frequency domain [27],”
Background(2009) · Encyclopedia of Neuroscience · doi:10.1007/978-3-540-29678-2_6014 · Cited by 2,850
(1996) · Adapted Wavelet Analysis · doi:10.1201/9781439863619-15 · Cited by 2,703
A Review on Basic Data-Driven Approaches for Industrial Process Monitoring
Yin, S., Ding, S. X., Xie, X., & Luo, H. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2301773 · Cited by 1,716 · cited 1×
“So, there is a growing interest in on-line condition monitoring methods [1], [2], whose main goal is to detect a fault at its early state without”
BackgroundWavelets for fault diagnosis of rotary machines: A review with applications
Yan, R., Gao, R. X., & Chen, X. (2014) · Signal Processing · doi:10.1016/j.sigpro.2013.04.015 · Cited by 1,446 · cited 1×
“These drawbacks have a major impact in transientbased fault diagnosis methods, which require advanced and complex signal processing tools such as the STFT [13], [14], the wavelet transform [15], [16], the empirical mode decomposition [17], [18], the Wigner Ville distribution (W VD) [19], among many others.”
MethodChen, J., Pan, J., Li, Z., Zi, Y., & Chen, X. (2016) · Renewable Energy · doi:10.1016/j.renene.2015.12.010 · Cited by 361 · cited 1×
“These drawbacks have a major impact in transientbased fault diagnosis methods, which require advanced and complex signal processing tools such as the STFT [13], [14], the wavelet transform [15], [16], the empirical mode decomposition [17], [18], the Wigner Ville distribution (W VD) [19], among many others.”
MethodGeneral Parameterized Time-Frequency Transform
Yang, Y., Peng, Z. K., Dong, X. J., Zhang, W. M., & Meng, G. (2014) · IEEE Transactions on Signal Processing · doi:10.1109/tsp.2014.2314061 · Cited by 219
Cabal-Yepez, E., Garcia-Ramirez, A. G., Romero-Troncoso, R. J., Garcia-Perez, A., & Osornio-Rios, R. A. (2013) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2012.2221131 · Cited by 177 · cited 2×
“transform (STFT) [13], [14], the wavelet transform [15], [16], the empirical mode decomposition [17], [18], the Wigner Ville distribution (WVD) [19], among many others.”
BackgroundMethodDetection of Eccentricity Faults in Induction Machines Based on Nameplate Parameters
Nandi, S., Ilamparithi, T. C., Lee, S. B., & Hyun, D. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2055772 · Cited by 154 · cited 1×
“transform (STFT) [13], [14], the wavelet transform [15], [16], the empirical mode decomposition [17], [18], the Wigner Ville distribution (WVD) [19], among many others.”
MethodGao, H., Liang, L., Chen, X., & Xu, G. (2014) · Chinese Journal of Mechanical Engineering · doi:10.3901/cjme.2014.1103.166 · Cited by 146 · cited 1×
“The STFT of currents and vibrations has been extensively used for detecting, in transient regime, different types of IM’s faults such as rotor broken bars or damaged bearings [33], among others.”
Background
Cited by
Items 101–147 of 147
Sun, X., Ding, H., Li, N., Dong, X., Liao, Y., Liu, Z., & Bai, X. (2024) · Measurement Science and Technology · doi:10.1088/1361-6501/ad3a08 · Cited by 5
“Burriel– Valencia et al [8] used short-time Fourier transform (STFT) for spectral analysis and feature extraction of vibration signals from induction motors.”
A Novel Algorithm to Detect Broken Bars in Induction Motors
Souza, M. V., Lima, J. C. O., Roque, A. M. P., & Riffel, D. B. (2021) · Machines · doi:10.3390/machines9110250 · Cited by 5
“The traditional signal processing techniques used to analyze the measured current are the short-time Fourier transform (STFT) [9,10] and Wavelet transform (WT) [5,11].”
MethodAssessing the impact of magnetic circuit corrosion on the magnetic performance of induction machines
Ouadah, M., Younes, A., Touhami, O., & Ibtiouen, R. (2024) · Electrical Engineering · doi:10.1007/s00202-023-02203-9 · Cited by 5
Experimental Validation of the Broken Rotor Bar Fault Evolution in Line-Fed Induction Motors
Yanez-Borjas, J. J., Camarena‐Martinez, D., Vasquez-Barrera, M. A., Romero-Troncoso, R. D. J., & Moríñigo-Sotelo, D. (2018) · IEEE International Autumn Meeting on Power, Electronics and Computing (ROPEC) · doi:10.1109/ropec.2018.8661426 · Cited by 5
“Short frequency Fourier transform (SFFT) is proposed in [13] reducing the computing time and memory resources used by the STFT.”
MethodA time-frequency energy segmentation reconstruction method for multimodal ultrasonic guided waves
Kong, W., Li, D., Zeng, L., Li, Y., Zhang, J. Q., & Ta, D. (2025) · Ultrasonics · doi:10.1016/j.ultras.2025.107635 · Cited by 4
Li, X., Zeng, Y., Qian, J., Wang, Y., Zhang, X., Wang, F., & Li, D. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.117005 · Cited by 4
Decision Support System for Diagnosing Broken Rotor Bar Severity in Induction Motors
Maciejewski, N. A. R., do Nascimento, C. P., Gremonini, L., Iamamura, B. A. T., Ferreira, A. P. B. S., Bastos, J. P. A., Dreyer, U. J., & Bazzo, T. D. P. M. (2026) · IEEE Access · doi:10.1109/access.2026.3657711 · Cited by 4
“Whereas [9], [16], [26], [28] analyze the fundamental frequency and its sidebands, [27], [29] considers the 5 th and 7 th order harmonics along with their respective sidebands.”
Lü, C., Wang, C., Chen, S., Duan, Q., & Xie, H. (2022) · Science and Technology of Nuclear Installations · doi:10.1155/2022/2675875 · Cited by 4
“…from sensor signals, compares with baseline features, and makes a fnal diagnostic decision [6], whereas traditional signal transformation methods such as Fourier and wavelet, as well as feature dimension reduction methods such as PCA and t-NSE, are efective feature extraction methods [7–9].”
MethodGNPENet: A Novel Convolutional Neural Network With Local Structure for Fault Diagnosis
Wang, J., Ran, R., & Fang, B. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3329156 · Cited by 4
“The short-FFT (SFFT) that not only keeps the resolution but also reduces the consumed computation and time is used for fault diagnosis of induction machines working under transient regimes [14].”
MethodThe Analysis of Odd Triple Harmonics to Detect Broken Rotor Bar in Delta-Connected Induction Motors
de Souza, R. P. P., Moríñigo-Sotelo, D., Fernandez-Cavero, V., Duque-Pérez, Ó., Agulhari, C. M., & Goedtel, A. (2024) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2024.3447632 · Cited by 4
Xu, S., Liu, H., & Bi, T. (2023) · Journal of Modern Power Systems and Clean Energy · doi:10.35833/mpce.2021.000527 · Cited by 4
Lin, S.-C., Su, S., & Huang, Y. (2019) · International Conference on System Science and Engineering · doi:10.1109/icsse.2019.8823285 · Cited by 3
“[2] performed induction motor fault detection in the laboratory according to different loading conditions.”
MethodLLM-VSFD: cross-modal learning for few-shot vibrating screen fault diagnosis
Wu, Y., (赵), X. (. Z., Cui, Y., Zou, Q., Liu, Y., Xu, Z., Bao, Z., Lv, Z., & Wang, W. (2026) · Measurement Science and Technology · doi:10.1088/1361-6501/ae3978 · Cited by 3
Sharma, N. R., Bhalja, B. R., & Malik, O. P. (2025) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2025.3604359 · Cited by 3
“High-resolution spectral methods, like Root-MUSIC [17], improve frequency resolution, while time-frequency techniques including STFT [18], WT [19], and WVD [20] capture both spectral and temporal variations for evolving faults.”
Husebø, A. B., Kandukuri, S. T., Klausen, A., Huynh, V. K., & Robbersmyr, K. G. (2020) · PHM Society European Conference · doi:10.36001/phme.2020.v5i1.1247 · Cited by 3
Diagnosis of rotor faults by fast Fourier transform using an auxiliary winding voltage
Jelbaoui, Y. K., Menzhi, L. E., & Saad, A. (2021) · Indonesian Journal of Electrical Engineering and Computer Science · doi:10.11591/ijeecs.v24.i2.pp680-688 · Cited by 3
Li, S., Zhao, J., Wu, Y., Bian, S., & Zhai, G. (2023) · IEEE Transactions on Geoscience and Remote Sensing · doi:10.1109/tgrs.2023.3283305 · Cited by 3
“and memory resources) [29], as well as the S transform”
BackgroundShi, F., Zeng, L., Fu, Y., Zhima, Z., Liu, D., & Cao, J. (2025) · Journal of Geophysical Research Space Physics · doi:10.1029/2025ja034093 · Cited by 2
“Due to the finite frequency resolution of STFT, the energy of single‐frequency components can spread to neighboring frequencies (Burriel‐Valencia et al., 2017).”
Xiao, F., Li, R., Wang, H., Chunfang, Z., Shang, Y., & Ai, Q. (2026) · IET Generation Transmission & Distribution · doi:10.1049/gtd2.70245 · Cited by 2
Broken rotor bar fault detection using odd triple harmonics in delta-connected induction motors
de Souza, R. P. P., Moríñigo-Sotelo, D., Fernandez-Cavero, V., Duque-Pérez, Ó., Agulhari, C. M., & Goedtel, A. (2023) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/sdemped54949.2023.10271506 · Cited by 2
“Nevertheless, in (5), it is possible to notice that Part I and II generate the positive sequence harmonics given by fs(h(1−s)±s), harmonics commonly used as fault indicators in time-frequency techniques [17], [18].”
BackgroundDirectional Noise Suppression Based on Dual-Microphone With Desired Direction Presetting
Zhao, Q., Chen, Z., & Yin, F. (2024) · IEEE Sensors Journal · doi:10.1109/jsen.2024.3358852 · Cited by 2
“Since speech signals are often processed by short-time Fourier transform (STFT) [29] in the discrete form in practice, dual-microphone signals are Authorized licensed use limited to the terms of the applicable license agreement with IEEE.”
BackgroundDiagnosis Methods for Mechatronic Systems
Derbel, S., Féki, N., Nicolau, F., Barbot, J., Abbès, M. S., & Haddar, M. (2020) · Lecture notes in mechanical engineering · doi:10.1007/978-3-030-46729-6_5 · Cited by 2
Li, Q. '., Zuo, M. J., & Cattani, C. (2020) · ISA Transactions · doi:10.1016/j.isatra.2020.02.002 · Cited by 4
RetractedSpodoba, М. О., О.O., S., & Igorovich, K. S. (2026) · Problems of the Regional Energetics · doi:10.52254/1857-0070.2026.1-69.14 · Cited by 1
Du, Y., Geng, X., Cheng, S., & Zhang, H. (2026) · Measurement Science and Technology · doi:10.1088/1361-6501/ae7c92 · Cited by 1
“For instance, Burriel-Valencia et al [5] employed short-time Fourier transform for FCD of induction motors under transient conditions, offering improved differentiation and identification of harmonic components related to faults.”
Jiang, Y., Jiang, Y., Liu, Z., Chen, Y., & Wang, P. (2026) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2026.3702939 · Cited by 1
Quamar, M. M., & Nasir, A. (2026) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2026.116367 · Cited by 1
Nieto, F. J., Blázquez, F. C., Platero, C. A., & Casado, A. J. (2017) · IEEE International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) · doi:10.1109/demped.2017.8062395 · Cited by 1
“As in hydro generators [5], wind generators [6][6] and in induction motors [7] [8], these diagnosis systems should be able to detect the problem almost immediately by analyzing generator voltage, current and electric power, which can be easily monitored and measured, in contrast with usual maintenance procedures based…”
MethodRSWPT for Induction Machine Fault Diagnosis Based on Transient Current Signal
Hmida, M. A., & Braham, A. (2018) · International Multi-Conference on Systems, Signals & Devices (SSD) · doi:10.1109/ssd.2018.8570680 · Cited by 1
Novel Method for Rotor Bar Fault Diagnosis of Induction Machines Containing Space Harmonics
Ouadah, M., Touhami, O., & Ibtiouen, R. (2019) · International Conference on Systems and Control (ICSC) · doi:10.1109/icsc47195.2019.8950630 · Cited by 1
GAF-AlexNet based Incipient Agglomerates Monitoring of Fluidized Bed Reactor*
Yan, W., Lei, Z., Wang, J., & Zhou, M. (2023) · International Conference on Industrial Artificial Intelligence (IAI) · doi:10.1109/iai59504.2023.10327532 · Cited by 1
“The mainstream frequency domain feature extraction methods mainly include STFT [11], wavelet transform [12], Hilbert transforms [13], and empirical mode decomposition [14].”
MethodDeep Learning-Based Estimation of Remaining Useful Life of Bearing Using Time–Frequency Spectrogram
Subha, R., Rekha, R., & Selvadass, M. (2025) · Smart innovation, systems and technologies · doi:10.1007/978-981-97-7717-4_17 · Cited by 1
Characteristic analysis of demagnetization fault in FSCW-PMM with four-layer windings
Elhindi, M., Chen, Z., Ma, H., Sun, X., & Abdalla, M. A. A. (2025) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2025.172990 · Cited by 2
Yan, L., & Du, J. (2022) · Research Square · doi:10.21203/rs.3.rs-1511700/v1 · Cited by 1
Kırık Rotor Çubuğu Arızası için Bulanık Otomata Yöntemi Kullanılarak Gerçek Zamanlı Arıza
Yaman, O., Karaköse, E., Aydın, İ., Karaköse, M., & Akın, E. (2017) · Fırat Üniversitesi Mühendislik Bilimleri Dergisi
The Fault Diagnosis of Rolling Bearing Based on WPD and TPOT
Zhang, D., & Wang, Y. (2019) · Chinese Automation Congress · doi:10.1109/cac48633.2019.8996312
Terron-Santiago, C. (2022) · RiuNet (Universitat Politècnica de València) · doi:10.4995/thesis/10251/183782 · Cited by 1
An Efficient Method for Feature Extraction and Selection in Power Quality Recognition
Dalei, J., & Sahu, G. (2022) · Electric Power Components and Systems · doi:10.1080/15325008.2022.2143939
“As the size of the window is fixed, STFT covers only some portions of the signal hence unable to identify transient feature of PQ disturbances [9, 10].”
BackgroundAuluck, N., & Maurya, S. (2022) · IEEE International Conference on Condition Assessment Techniques in Electrical Systems (CATCON) · doi:10.1109/catcon56237.2022.10077686
Simulation of Diagnostic Signals of Electric Equipment
Babak, V. P., Babak, S., & Zaporozhets, A. O. (2024) · Studies in systems, decision and control · doi:10.1007/978-3-031-76253-6_6
Polynomial-Demodulated Extracting Transform and Application to Bearing Fault Diagnosis
Zhang, P., Le, Q., Chen, H., Chen, X., Hu, Y., & Song, Y. (2025) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2025.3644540
Gritli, Y., Tani, A., & Rossi, C. (2026) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2026.3704103
“…necessitates alternative specialized signal processing approaches to address time-varying fault signatures, including short-time Fourier transform [20], wavelet transform [21], or Wigner–Ville distribution [22], or Gabor analysis [23], provide joint time-frequency representations that track…”
Roche-Pinol, L., Granados, J. M. G., & Fernandez-Cavero, V. (2026) · Measurement · doi:10.1016/j.measurement.2026.122323
Impact of Traction Motors Bearings Degradation in Common Mode Current
Noia, L. P. D., Fedele, E., Meo, S., & Rizzo, R. (2026) · Global Power, Energy and Communication Conference · doi:10.1109/gpecom70462.2026.11578417
“…numerical methods proposed in literature for many applications [19,20], of which the following are those used in this paper: Short time Fourier Series, STFS [21]: this technique permits to analyze a signal and detect how the frequency and phase of a non-stationary signal vary with the time.”
Fault Diagnosis of Communication Systems Based on Multi-Scale Feature Fusion and Neural Spline Flow
Li, J., Zhang, X., Hou, L., & Chen, S. (2026) · Asia-Pacific International Symposium on Electromagnetic Compatibility (APEMC) · doi:10.1109/apemc65388.2026.11593719
“Conventional approaches, predominantly reliant on signal processing and machine learning, typically transform signals via methods like Fourier Transform[1] or Wavelet Decomposition[2] before feeding them into classifiers such as SVM[3] or Random Forests[4].”
Martínez‐Román, J., Puche‐Panadero, R., Terron-Santiago, C., Burriel-Valencia, J., Riera‐Guasp, M., Pineda‐Sanchez, M., & Sapena-Bañó, Á. (2026) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2026.3712937
“Linear TF transforms, such as the short time Fourier transform (STFT) [56], short frequency Fourier transform (SFFT) [57], Gabor transform [58], wavelet transform [59], or the chirplet transform [60], correlate the current signal with TF atoms.”
Self-citationFault diagnosis for micro-UAVs via CBAM-enhanced MobileNetV2 and audio feature fusion
慕玲霞, Zhang, Y., Wang, B., Wang, D., Feng, N., & Xue, X. (2026) · International Journal of Micro Air Vehicles · doi:10.48130/mav-0026-0015
Metadata
- Authors
- Burriel-Valencia, J., Puche-Panadero, R., Martinez-Roman, J., Sapena-Bano, A., & Pineda-Sanchez, M.
- Affiliations
- Universitat Politècnica de València (ES)
- Venue
- IEEE Transactions on Instrumentation and Measurement
- Published
- 2017-03
- Volume
- 66
- Issue
- 3
- Pages
- 432-440
- ISSN
- 0018-9456 (ISSN-L)
- 1557-9662
- OpenAlex
- W2582337578
- Cited by
- 144
- References
- 36
- Citations by year
- 2026: 11 · 2025: 14 · 2024: 20 · 2023: 24 · 2022: 17 · 2021: 16 · 2020: 11 · 2019: 14 · 2018: 14 · 2017: 3
- FWCI
- 7.22
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Locations
- IEEE Transactions on Instrumentation and Measurement (publishedVersion)
- RiuNet (Universitat Politècnica de València) (submittedVersion, cc-by-nc-nd)
- Funders
- Spanish Ministerio de Economía y Competitividad in the framework of the Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad (DPI2014-60881-R)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Sensorless Control of Electric Motors
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Motor Design and Analysis
- Keywords
- induction motor, fault diagnosis, transient regime, time-frequency representation, stator current, real-time fault diagnosis, computational efficiency, low-cost implementation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.