Short-Frequency Fourier Transform for Fault Diagnosis of Induction Machines Working in Transient Regime
Open accessThe DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Abstract
Transient-based methods for fault diagnosis of induction machines (IMs) are attracting a rising interest, due to their reliability and ability to adapt to a wide range of IM's working conditions. These methods compute the time-frequency (TF) distribution of the stator current, where the patterns of the related fault components can be detected. A significant amount of recent proposals in this field have focused on improving the resolution of the TF distributions, allowing a better discrimination and identification of fault harmonic components. Nevertheless, as the resolution improves, computational requirements (power computing and memory) greatly increase, restricting its implementation in low-cost devices for performing on-line fault diagnosis. To address these drawbacks, in this paper, the use of the short-frequency Fourier transform (SFFT) for fault diagnosis of induction machines working under transient regimes is proposed. The SFFT not only keeps the resolution of traditional techniques, such as the short-time Fourier transform, but also achieves a drastic reduction of computing time and memory resources, making this proposal suitable for on-line fault diagnosis. This method is theoretically introduced and experimentally validated using a laboratory test bench.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“e proposed method greatly reduced the computing time and memory resources.”
From Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review (2021) · cites this paper as [119]
Citations
Cites
Time-frequency distributions-a review
Cohen, L. (1989) · Proceedings of the IEEE · doi:10.1109/5.30749 · Cited by 3,571 · cited 1×
“In other words, the non-stationary signal can b e considered as locally stationary, and then can be transform ed into the time-frequency domain [27],”
Background(2009) · Encyclopedia of Neuroscience · doi:10.1007/978-3-540-29678-2_6014 · Cited by 2,850
(1996) · Adapted Wavelet Analysis · doi:10.1201/9781439863619-15 · Cited by 2,703
A Review on Basic Data-Driven Approaches for Industrial Process Monitoring
Yin, S., Ding, S. X., Xie, X., & Luo, H. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2301773 · Cited by 1,716 · cited 1×
“So, there is a growing interest in on-line condition monitoring methods [1], [2], whose main goal is to detect a fault at its early state without”
BackgroundWavelets for fault diagnosis of rotary machines: A review with applications
Yan, R., Gao, R. X., & Chen, X. (2014) · Signal Processing · doi:10.1016/j.sigpro.2013.04.015 · Cited by 1,446 · cited 1×
“These drawbacks have a major impact in transientbased fault diagnosis methods, which require advanced and complex signal processing tools such as the STFT [13], [14], the wavelet transform [15], [16], the empirical mode decomposition [17], [18], the Wigner Ville distribution (W VD) [19], among many others.”
MethodChen, J., Pan, J., Li, Z., Zi, Y., & Chen, X. (2016) · Renewable Energy · doi:10.1016/j.renene.2015.12.010 · Cited by 361 · cited 1×
“These drawbacks have a major impact in transientbased fault diagnosis methods, which require advanced and complex signal processing tools such as the STFT [13], [14], the wavelet transform [15], [16], the empirical mode decomposition [17], [18], the Wigner Ville distribution (W VD) [19], among many others.”
MethodGeneral Parameterized Time-Frequency Transform
Yang, Y., Peng, Z. K., Dong, X. J., Zhang, W. M., & Meng, G. (2014) · IEEE Transactions on Signal Processing · doi:10.1109/tsp.2014.2314061 · Cited by 219
Cabal-Yepez, E., Garcia-Ramirez, A. G., Romero-Troncoso, R. J., Garcia-Perez, A., & Osornio-Rios, R. A. (2013) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2012.2221131 · Cited by 177 · cited 2×
“transform (STFT) [13], [14], the wavelet transform [15], [16], the empirical mode decomposition [17], [18], the Wigner Ville distribution (WVD) [19], among many others.”
BackgroundMethodDetection of Eccentricity Faults in Induction Machines Based on Nameplate Parameters
Nandi, S., Ilamparithi, T. C., Lee, S. B., & Hyun, D. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2055772 · Cited by 154 · cited 1×
“transform (STFT) [13], [14], the wavelet transform [15], [16], the empirical mode decomposition [17], [18], the Wigner Ville distribution (WVD) [19], among many others.”
MethodGao, H., Liang, L., Chen, X., & Xu, G. (2014) · Chinese Journal of Mechanical Engineering · doi:10.3901/cjme.2014.1103.166 · Cited by 146 · cited 1×
“The STFT of currents and vibrations has been extensively used for detecting, in transient regime, different types of IM’s faults such as rotor broken bars or damaged bearings [33], among others.”
BackgroundCross-terms reduction in the Wigner–Ville distribution using tunable-Q wavelet transform
Pachori, R. B., & Nishad, A. (2015) · Signal Processing · doi:10.1016/j.sigpro.2015.07.026 · Cited by 127 · cited 1×
“Quadratic-based TF transforms, such as the WVD, generate cross-terms effects that can difficult the evaluation of the spectrogram, and their minimization has been widely discus ed in the technical literature [20]–[22].”
BackgroundStator-Current Spectrum Signature of Healthy Cage Rotor Induction Machines
Joksimovic, G. M., Riger, J., Wolbank, T. M., Peric, N., & Vasak, M. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2236995 · Cited by 125 · cited 2×
“Additionally, the diagnostic procedure must be sim ple, compact and fast, to be executed on-line by embedded devices [6], [7], [12], or even by the same devices that control the IM , such as variable speed drives (VSDs).”
BackgroundMethodSapena-Bañó, Á., Pineda‐Sanchez, M., Puche‐Panadero, R., Martínez‐Román, J., & Matic, D. (2015) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2015.2444240 · Cited by 116 · cited 2×
“This approach h s been recently proposed in the discrete case [4] using the fas t Fourier transform (FFT), and is extended in this paper to the continuous domain, using the SFFT.”
MethodSelf-citationA Simple Real-Time Fault Signature Monitoring Tool for Motor-Drive-Embedded Fault Diagnosis Systems
Akin, B., Choi, S., Orguner, U., & Toliyat, H. A. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2051936 · Cited by 113 · cited 2×
“Additionally, the diagnostic procedure must be simple, compact, and fast, to be executed on-line by embedded devices [6], [7], [12], or even by the same devices that control the IM, such as variable speed drives (VSDs).”
BackgroundEmpirical Mode Decomposition Analysis for Broken-Bar Detection on Squirrel Cage Induction Motors
Valles-Novo, R., Rangel‐Magdaleno, J., Ramírez-Cortés, J. M., Barreto, H. P., & Caporal, R. M. (2014) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2014.2373513 · Cited by 109 · cited 1×
“transform (STFT) [13], [14], the wavelet transform [15], [16], the empirical mode decomposition [17], [18], the Wigner Ville distribution (WVD) [19], among many others.”
MethodChoi, S., Akin, B., Rahimian, M. M., & Toliyat, H. A. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2048837 · Cited by 108 · cited 2×
“This allows for computing diagnostic spectrograms on-line using low cost digital signal devices, such as DSPs or FPGAs.”
BackgroundDiagnosis of Induction Motor Faults via Gabor Analysis of the Current in Transient Regime
Riera‐Guasp, M., Pineda‐Sanchez, M., Pérez‐Cruz, J., Puche‐Panadero, R., Roger-Folch, J., & Daviu, J. A. A. (2012) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2012.2186650 · Cited by 106
Self-citationDetection of Induction Motor Faults in Inverter Drives Using Inverter Input Current Analysis
Georgakopoulos, I. P., Mitronikas, E. D., & Safacas, A. N. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2093476 · Cited by 89 · cited 1×
“Modern hardware devices can operate at sampli ng rates well above100 kHz [8], so that the use of high sampling rates is common: 20 kHz in [9], 50 kHz in [10] and100 kHz in [11].”
BackgroundRangel‐Magdaleno, J., Barreto, H. P., Ramírez-Cortés, J. M., Gómez‐Gil, P., & Caporal, R. M. (2014) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2013.2286931 · Cited by 87 · cited 1×
“Hence the complexity of these signal processing-based condition monitoring techniques have limited their use in r ealtime applications [23], specially in field programmable gat e array (FPGA) [13], [24], digital signal processor (DSP) [25 ] or even in general-purpose graphics processing units (GPGPUs ) [23].”
MethodSpectroscopic Optical Coherence Tomography and Microscopy
Oldenburg, A. L., Xu, C., & Boppart, S. A. (2007) · IEEE Journal of Selected Topics in Quantum Electronics · doi:10.1109/jstqe.2007.910292 · Cited by 86 · cited 1×
“The theoretical background of the SFFT, resumed in this section, can be found in the technical literature under different names: as long-time Fourier transform (LTFT) in [26], as short-frequency time transform (SFTT) in [26]–[28], and as SFFT in [29]–[32].”
BackgroundHarmonic Order Tracking Analysis: A Novel Method for Fault Diagnosis in Induction Machines
Sapena-Bañó, Á., Pineda‐Sanchez, M., Puche‐Panadero, R., Pérez‐Cruz, J., Roger-Folch, J., Riera‐Guasp, M., & Martínez‐Román, J. (2015) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2015.2416973 · Cited by 81 · cited 1×
“Modern hardware devices can operate at sampling rates well above 100 kHz [8], so that the use of high sampling rates is common: 20 kHz in [9], 50kHz in [10], and 100 kHz in [11].”
BackgroundSelf-citationMedina, L. M. C., de Jesus Romero-Troncoso, R., Cabal-Yepez, E., de Jesus Rangel-Magdaleno, J., & Millan-Almaraz, J. R. (2010) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2009.2021642 · Cited by 70 · cited 1×
“So, there is a growing interest in on-line condition monitoring methods [1], [2], whose main goal is to detect a fault at its early state without”
BackgroundRomero-Troncoso, R. D. J., García-Pérez, A., Moríñigo-Sotelo, D., Duque-Pérez, Ó., Osornio-Rios, R. A., & Ibarra-Manzano, M.-A. (2016) · Electric Power Systems Research · doi:10.1016/j.epsr.2015.12.009 · Cited by 68
Frequency-varying group delay estimation using frequency domain polynomial chirplet transform
Yang, Y., Peng, Z., Zhang, W. M., & Meng, G. (2014) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2014.01.002 · Cited by 55 · cited 1×
“The theoretical background of the SFFT, resumed in this section, can be found in the technical literature under different names: as long-time Fourier transform (LTFT) in [26], as short-frequency time transform (SFTT) in [26]–[28], and as SFFT in [29]–[32].”
BackgroundAn Empirical Demodulation for Electrical Fault Detection in Induction Motors
Batista, F. B., Filho, P. C. M. L., Pederiva, R., & Silva, V. A. D. (2016) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2015.2509398 · Cited by 55 · cited 1×
“transform (STFT) [13], [14], the wavelet transform [15], [16], the empirical mode decomposition [17], [18], the Wigner Ville distribution (WVD) [19], among many others.”
MethodLi, D. Z., Wang, W., & Ismail, F. (2015) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2015.2419031 · Cited by 52 · cited 1×
“Fault diagnosis of IMs via the current analysis is widely used, because it is a noninvasive method, has low hardware requirements (just one current must be sampled), and can identify a great variety of machine faults through the analysis of the current in the frequency domain, using the current spectrum for steady-sta…”
Kang, M., Kim, J., & Kim, J.-M. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2356207 · Cited by 47
Diagnosis of Induction Motors Under Varying Speed Operation by Principal Slot Harmonic Tracking
Climente-Alarcón, V., Daviu, J. A. A., Haavisto, A., & Arkkio, A. (2015) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2015.2413963 · Cited by 46 · cited 3×
“transform (STFT) [13], [14], the wavelet transform [15], [16], the empirical mode decomposition [17], [18], the Wigner Ville distribution (WVD) [19], among many others.”
MethodArchitecture Exploration for a High-Performance and Low-Power Wireless Vibration Analyzer
Shahzad, K., Cheng, P., & Oelmann, B. (2013) · IEEE Sensors Journal · doi:10.1109/jsen.2012.2226238 · Cited by 32 · cited 1×
“Modern hardware devices can operate at sampling rates well above 100 kHz [8], so that the use of high sampling rates is common: 20 kHz in [9], 50kHz in [10], and 100 kHz in [11].”
BackgroundOnline computational tools dedicated to the detection of induction machine faults
Lebaroud, A., & Medoued, A. (2012) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2012.08.040 · Cited by 28 · cited 1×
“Additionally, the diagnostic procedure must be sim ple, compact and fast, to be executed on-line by embedded devices [6], [7], [12], or even by the same devices that control the IM , such as variable speed drives (VSDs).”
MethodEffects of the Speed Loop on the Diagnosis of Rotor Faults in Induction Machines
Toscani, S., Faifer, M., Rossi, M., Cristaldi, L., & Lazzaroni, M. (2012) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2012.2196392 · Cited by 24 · cited 1×
“Modern hardware devices can operate at sampling rates well above 100 kHz [8], so that the use of high sampling rates is common: 20 kHz in [9], 50kHz in [10], and 100 kHz in [11].”
BackgroundA new strategy for the suppression of cross-terms in pseudo Wigner–Ville distribution
Ren, H., Ren, A. M., & Li, Z. (2014) · Signal Image and Video Processing · doi:10.1007/s11760-014-0713-9 · Cited by 22
Azaña, J., & Muriel, M. A. (2000) · Optics Letters · doi:10.1364/ol.25.000698 · Cited by 10
On the Behavior of the Continuous-Time Spectrogram for Arbitrarily Narrow Windows
Bizarro, J. P. S. (2007) · IEEE Transactions on Signal Processing · doi:10.1109/tsp.2006.890890 · Cited by 10 · cited 2×
“frequency domain, but just in the frequency bands of interest: [0, 35] Hz case 1, [35, 60] Hz case 2, and [28, 62] Hz case 3.”
BackgroundMalnar, D., Sucic, V., & Car, Z. (2015) · Procedia Engineering · doi:10.1016/j.proeng.2015.01.540 · Cited by 6 · cited 1×
“Quadratic-based TF transforms, such as the WVD, generate cross-terms effects that can difficult the evaluation of the spectrogram, and their minimization has been widely discussed in the technical literature [20]–[22].”
BackgroundSignal moments for the short‐time Fourier transform associated with Hardy–Sobolev derivatives
Liu, M., Kou, K. I., Morais, J., & Dang, P. (2014) · Mathematical Methods in the Applied Sciences · doi:10.1002/mma.3254 · Cited by 3
Cited by
Li, X., Zhang, W., & Ding, Q. (2019) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2018.11.011 · Cited by 582
Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review
Mohd Ghazali, M. H., & Rahiman, W. (2021) · Shock and Vibration · doi:10.1155/2021/9469318 · Cited by 249
“To avoid cross-term effects, Burriel-Valencia et al. [119] implemented the STFT method for fault diagnosis of induction machines, where the spectrums in the frequency domain in the relevant frequency band are filtered. proposed method greatly reduced the computing time and memory resources.”
MethodKnowledge Transfer for Rotary Machine Fault Diagnosis
Yan, R., Shen, F., Sun, C., & Chen, X. (2020) · IEEE Sensors Journal · doi:10.1109/jsen.2019.2949057 · Cited by 245
“For example, Burriel-Valencia et al. [126] promoted the Fourier transform to short-frequency Fourier transform for fault diagnosis of induction machines working in transient regime.”
BackgroundA Hybrid Feature Model and Deep-Learning-Based Bearing Fault Diagnosis
Sohaib, M., Kim, C.-H., & Kim, J.-M. (2017) · Sensors · doi:10.3390/s17122876 · Cited by 200
“The nonstationary behavior can be explored by various time–frequency analysis techniques, including the Wigner Ville distribution (WVD) [24], short time Fourier transform (STFT) [25–27], and wavelet packet transform (WPT) [28,29].”
MethodRahimilarki, R., Gao, Z., Jin, N., & Zhang, A. (2021) · Renewable Energy · doi:10.1016/j.renene.2021.12.056 · Cited by 152
Metadata
- Authors
- Burriel-Valencia, J., Puche-Panadero, R., Martinez-Roman, J., Sapena-Bano, A., & Pineda-Sanchez, M.
- Affiliations
- Universitat Politècnica de València (ES)
- Venue
- IEEE Transactions on Instrumentation and Measurement
- Published
- 2017-03
- Volume
- 66
- Issue
- 3
- Pages
- 432-440
- ISSN
- 0018-9456 (ISSN-L)
- 1557-9662
- OpenAlex
- W2582337578
- Cited by
- 144
- References
- 36
- Citations by year
- 2026: 11 · 2025: 14 · 2024: 20 · 2023: 24 · 2022: 17 · 2021: 16 · 2020: 11 · 2019: 14 · 2018: 14 · 2017: 3
- FWCI
- 7.22
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Locations
- IEEE Transactions on Instrumentation and Measurement (publishedVersion)
- RiuNet (Universitat Politècnica de València) (submittedVersion, cc-by-nc-nd)
- Funders
- Spanish Ministerio de Economía y Competitividad in the framework of the Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad (DPI2014-60881-R)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Sensorless Control of Electric Motors
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Motor Design and Analysis
- Keywords
- induction motor, fault diagnosis, transient regime, time-frequency representation, stator current, real-time fault diagnosis, computational efficiency, low-cost implementation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.