The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Optimized piezoelectric energy harvesting circuit using step-down converter in discontinuous conduction mode
Abstract
An optimized method of harvesting vibrational energy with a piezoelectric element using a step-down DC-DC converter is presented. In this configuration, the converter regulates the power flow from the piezoelectric element to the desired electronic load. Analysis of the converter in discontinuous current conduction mode results in an expression for the duty cycle-power relationship. Using parameters of the mechanical system, the piezoelectric element, and the converter; the "optimal" duty cycle can be determined where the harvested power is maximized for the level of mechanical excitation. It is shown that, as the magnitude of the mechanical excitation increases, the optimal duty cycle becomes essentially constant, greatly simplifying the control of the step-down converter. The expression is validated with experimental data showing that the optimal duty cycle can be accurately determined and maximum energy harvesting attained. A circuit is proposed which implements this relationship, and experimental results show that the converter increases the harvested power by approximately 325%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Power electronics converters, applications and design
Robinson, F. V. P. (1997) · Microelectronics Journal · doi:10.1016/s0026-2692(97)87859-7 · Cited by 5,075
Power Electronics: Converters, Applications and Design
Mohan, N., Undeland, T. M., & Robbins, W. P. (1989) · Cited by 4,771
Adaptive piezoelectric energy harvesting circuit for wireless remote power supply
Ottman, G. K., Hofmann, H. F., Bhatt, A. C., & Lesieutre, G. A. (2002) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2002.802194 · Cited by 1,206
Self-citationEnergy scavenging with shoe-mounted piezoelectrics
Shenck, N. S., & Paradiso, J. A. (2001) · IEEE Micro · doi:10.1109/40.928763 · Cited by 1,091
PicoRodio supports ad hoc ultra-low power wireless networking
Rabaey, J. M., Ammer, M. J., da Silva, J. L., Patel, D., & Roundy, S. (2000) · Computer · doi:10.1109/2.869369 · Cited by 1,010
Adaptive piezoelectric energy harvesting circuit for wireless, remote power supply
Ottman, G., Bhatt, A., Hofmann, H., & Lesieutre, G. (2001) · 19th AIAA Applied Aerodynamics Conference · doi:10.2514/6.2001-1505 · Cited by 953
Self-citationParasitic power harvesting in shoes
Kymissis, J., Kendall, C., Paradiso, J., & Gershenfeld, N. (2002) · Digest of Papers. Second International Symposium on Wearable Computers (Cat. No.98EX215) · doi:10.1109/iswc.1998.729539 · Cited by 621
Towards a piezoelectric vibration-poweredmicrogenerator
Glynne-Jones, P., Beeby, S. P., & White, N. M. (2001) · IEE Proceedings - Science, Measurement and Technology · doi:10.1049/ip-smt:20010323 · Cited by 354
Cited by
Energy Harvesting From Human and Machine Motion for Wireless Electronic Devices
Mitcheson, P. D., Yeatman, E. M., Rao, G. K., Holmes, A. S., & Green, T. C. (2008) · Proceedings of the IEEE · doi:10.1109/jproc.2008.927494 · Cited by 1,888
A piezoelectric vibration based generator for wireless electronics
Roundy, S., & Wright, P. K. (2004) · Smart Materials and Structures · doi:10.1088/0964-1726/13/5/018 · Cited by 1,818
A Review of Power Harvesting from Vibration Using Piezoelectric Materials
Sodano, H. A., Inman, D. J., & Park, G. (2004) · The Shock and Vibration Digest · doi:10.1177/0583102404043275 · Cited by 1,361
Piezoelectric and ferroelectric materials and structures for energy harvesting applications
Bowen, C. R., Kim, H. A., Weaver, P. M., & Dunn, S. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42454e · Cited by 1,223
Toward energy harvesting using active materials and conversion improvement by nonlinear processing
Guyomar, D., Badel, A., Lefeuvre, E., & Richard, C. (2005) · IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control · doi:10.1109/tuffc.2005.1428041 · Cited by 1,049
Improving Power Output for Vibration-Based Energy Scavengers
Roundy, S., Leland, E. S., Baker, J., Carleton, E., Reilly, E., Lai, E., Otis, B., Rabaey, J. M., Sundararajan, V., & Wright, P. K. (2005) · IEEE Pervasive Computing · doi:10.1109/mprv.2005.14 · Cited by 1,031
Thin Film Piezoelectrics for MEMS
Trolier-McKinstry, S., & Muralt, P. (2004) · Journal of Electroceramics · doi:10.1023/b:jecr.0000033998.72845.51 · Cited by 1,023
Smart Textiles for Electricity Generation
Chen, G., Li, Y., Bick, M., & Chen, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00821 · Cited by 931
Erturk, A., & Inman, D. J. (2011) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2010.11.018 · Cited by 824
Analysis of power output for piezoelectric energy harvesting systems
Shu, Y. C., & Lien, I. C. (2006) · Smart Materials and Structures · doi:10.1088/0964-1726/15/6/001 · Cited by 737
A comparison between several vibration-powered piezoelectric generators for standalone systems
Lefeuvre, E., Badel, A., Richard, C., Petit, L., & Guyomar, D. (2006) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2005.10.043 · Cited by 712
Energy harvesting from low frequency applications using piezoelectric materials
Li, H., Tian, C., & Deng, Z. D. (2014) · Applied Physics Reviews · doi:10.1063/1.4900845 · Cited by 705
Energy harvesting: State-of-the-art
Harb, A. (2011) · Renewable Energy · doi:10.1016/j.renene.2010.06.014 · Cited by 696
Piezoelectric Energy Harvesting Solutions: A Review
Covaci, C., & Gontean, A. (2020) · Sensors · doi:10.3390/s20123512 · Cited by 691
Comparison of Piezoelectric Energy Harvesting Devices for Recharging Batteries
Sodano, H. A., Inman, D. J., & Park, G. (2005) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x05056681 · Cited by 663
On the Effectiveness of Vibration-based Energy Harvesting
Roundy, S. (2005) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x05054042 · Cited by 654
Piezoelectric Energy Harvesting Device Optimization by Synchronous Electric Charge Extraction
Lefeuvre, E., Badel, A., Richard, C., & Guyomar, D. (2005) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x05056859 · Cited by 640
Buck-Boost Converter for Sensorless Power Optimization of Piezoelectric Energy Harvester
Lefeuvre, E., Audigier, D., Richard, C., & Guyomar, D. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.904230 · Cited by 439
Energy Harvesting for Structural Health Monitoring Sensor Networks
Park, G., Rosing, T., Todd, M. D., Farrar, C. R., & Hodgkiss, W. (2008) · Journal of Infrastructure Systems · doi:10.1061/(asce)1076-0342(2008)14:1(64 · Cited by 434
Piezoelectric Energy Harvesting Solutions
Caliò, R., Rongala, U., Camboni, D., Milazzo, M., Stefanini, C., De Petris, G., & Oddo, C. (2014) · Sensors · doi:10.3390/s140304755 · Cited by 390
Energy Harvesting Using a Piezoelectric “Cymbal” Transducer in Dynamic Environment
Kim, H. W., Batra, A., Priya, S., Uchino, K., Markley, D., Newnham, R. E., & Hofmann, H. F. (2004) · Japanese Journal of Applied Physics · doi:10.1143/jjap.43.6178 · Cited by 368
Self-citationResistive Impedance Matching Circuit for Piezoelectric Energy Harvesting
Kong, N., Ha, D. S., Erturk, A., & Inman, D. J. (2010) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x09357971 · Cited by 344
Small-scale energy harvesting through thermoelectric, vibration, and radiofrequency power conversion
Hudak, N. S., & Amatucci, G. G. (2008) · Journal of Applied Physics · doi:10.1063/1.2918987 · Cited by 343
Power Sources for Wireless Sensor Networks
Steingart, D. (2008) · Energy Harvesting Technologies · doi:10.1007/978-0-387-76464-1_9 · Cited by 330
An improved analysis of the SSHI interface in piezoelectric energy harvesting
Shu, Y. C., Lien, I. C., & Wu, W. J. (2007) · Smart Materials and Structures · doi:10.1088/0964-1726/16/6/028 · Cited by 324
Liang, J., & Liao, W.-H. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2167116 · Cited by 318
Xue, H., Hu, Y., & Wang, Q.-M. (2008) · IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control · doi:10.1109/tuffc.903 · Cited by 311
Efficiency of energy conversion for a piezoelectric power harvesting system
Shu, Y. C., & Lien, I. C. (2006) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/16/11/026 · Cited by 310
Damping as a result of piezoelectric energy harvesting
Lesieutre, G. A., Ottman, G. K., & Hofmann, H. F. (2004) · Journal of Sound and Vibration · doi:10.1016/s0022-460x(03)00210-4 · Cited by 300
Self-citationPower Sources for Wireless Sensor Networks
Roundy, S., Steingart, D., Frechette, L., Wright, P., & Rabaey, J. (2004) · Lecture Notes in Computer Science · doi:10.1007/978-3-540-24606-0_1 · Cited by 297
Recent progress in blue energy harvesting for powering distributed sensors in ocean
Zhao, T., Xu, M., Xiao, X., Ma, Y., Li, Z., & Wang, Z. L. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.106199 · Cited by 293
All-in-one energy harvesting and storage devices
Lee, J.-H., Kim, J., Kim, T. Y., Al Hossain, M. S., Kim, S.-W., & Kim, J. H. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta01229a · Cited by 292
Large-scale vibration energy harvesting
Zuo, L., & Tang, X. (2013) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x13486707 · Cited by 285
Piezoelectric wind energy harvester for low-power sensors
Sirohi, J., & Mahadik, R. (2011) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x11428366 · Cited by 269
Resistor Emulation Approach to Low-Power RF Energy Harvesting
Paing, T., Shin, J., Zane, R., & Popovic, Z. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.921167 · Cited by 264
A piezoelectric fibre composite based energy harvesting device for potential wearable applications
Swallow, L. M., Luo, J. K., Siores, E., Patel, I., & Dodds, D. (2008) · Smart Materials and Structures · doi:10.1088/0964-1726/17/2/025017 · Cited by 208
Enhanced vibration energy harvesting using dual-mass systems
Tang, X., & Zuo, L. (2011) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2011.05.019 · Cited by 181
Harvesting energy via electromagnetic damper: Application to bridge stay cables
Shen, W., & Zhu, S. (2015) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x13519003 · Cited by 95
Vibration energy harvesting from random force and motion excitations
Tang, X., & Zuo, L. (2012) · Smart Materials and Structures · doi:10.1088/0964-1726/21/7/075025 · Cited by 72
Cheng, X., Song, Y., Han, M., Meng, B., Su, Z., Miao, L., & Zhang, H. (2016) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2016.05.051 · Cited by 41
Sustainable micro-power circuit for piezoelectric energy harvesting tile
Jabbar, H., Hong, S. D., Hong, S. K., Yang, C. H., Jeong, S. Y., & Sung, T. H. (2017) · Integrated ferroelectrics · doi:10.1080/10584587.2017.1376964 · Cited by 18
Metadata
- Authors
- Ottman, G. K., Hofmann, H. F., & Lesieutre, G. A.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2003-03
- Volume
- 18
- Issue
- 2
- Pages
- 696-703
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2160030225
- Cited by
- 672
- References
- 8
- FWCI
- 59.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.