Application of Z-Source Inverter for Traction Drive of Fuel Cell—Battery Hybrid Electric Vehicles
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
This paper presents a Z-source inverter control strategy used to control power from the fuel cell, power to the motor, and state of charge (SOC) of the battery for fuel cell (FC)-battery hybrid electric vehicles (FCHEV). Traditional pulsewidth modulation inverter always requires an extra dc/dc converter to interface the battery in FCHEVs. The Z-source inverter utilizes an exclusive Z-source (LC) network to link the main inverter circuit to the FC (or any dc power source). By substituting one of the capacitors in the Z-source with a battery and controlling the shoot through duty ratio and modulation index independently, one is able to control the FC power, output power, and SOC of the battery at the same time. These facts make the Z-source inverter highly desirable for use in FCHEVs, as the cost and complexity is greatly reduced when compared to traditional inverters. These new concepts will be demonstrated by simulation and experimental results
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Peng, F. Z. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.808920 · Cited by 3,228
Self-citationRashid, R. (1988) · Cited by 2,662
Control-Oriented Modeling and Analysis for Automotive Fuel Cell Systems
Pukrushpan, J. T., Peng, H., & Stefanopoulou, A. G. (2004) · Journal of Dynamic Systems Measurement and Control · doi:10.1115/1.1648308 · Cited by 577
Z-Source Inverter for Motor Drives
Peng, F. Z., Joseph, A., Wang, J., Shen, M., Chen, L., Pan, Z., Ortiz-Rivera, E., & Huang, Y. (2005) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.850938 · Cited by 401
Self-citationDevelopment of Fuel-Cell Hybrid Vehicle
Matsumoto, T., Watanabe, N., Sugiura, H., & Ishikawa, T. (2002) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2002-01-0096 · Cited by 78
Cited by
Impedance-Source Networks for Electric Power Conversion Part I: A Topological Review
Siwakoti, Y. P., Peng, F. Z., Blaabjerg, F., Loh, P. C., & Town, G. E. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2313746 · Cited by 702
Self-citationİnci, M., Büyük, M., Demir, M. H., & İlbey, G. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110648 · Cited by 548
Comparison of Traditional Inverters and $Z$-Source Inverter for Fuel Cell Vehicles
Shen, M., Joseph, A., Wang, J., Peng, F. Z., & Adams, D. J. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.900505 · Cited by 502
Self-citationDevelopments of electric cars and fuel cell hydrogen electric cars
Wilberforce, T., El-Hassan, Z., Khatib, F. N., Al Makky, A., Baroutaji, A., Carton, J. G., & Olabi, A. G. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.07.054 · Cited by 478
Fuel cell hybrid electric vehicles: A review on power conditioning units and topologies
Das, H. S., Tan, C. W., & Yatim, A. H. M. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.03.056 · Cited by 463
800-V Electric Vehicle Powertrains: Review and Analysis of Benefits, Challenges, and Future Trends
Aghabali, I., Bauman, J., Kollmeyer, P. J., Wang, Y., Bilgin, B., & Emadi, A. (2021) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3044938 · Cited by 434
Krishnaswami, H., & Mohan, N. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2022756 · Cited by 411
Modeling and Control of Quasi-Z-Source Inverter for Distributed Generation Applications
Li, Y., Jiang, S., Cintron-Rivera, J. G., & Peng, F. Z. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2213551 · Cited by 382
Self-citationAutomotive Traction Inverters: Current Status and Future Trends
Reimers, J., Dorn-Gomba, L., Mak, C., & Emadi, A. (2019) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2019.2897899 · Cited by 375
“range [15], [16].”
A high-efficiency grid-tie battery energy storage system
Qian, H., Zhang, J., Lai, J.-S., & Yu, W. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2096562 · Cited by 360
Schaltz, E., Khaligh, A., & Rasmussen, P. O. (2009) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2009.2027909 · Cited by 357
Loh, P. C., Li, D., & Blaabjerg, F. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2243755 · Cited by 285
Analysis and Evaluation of DC-Link Capacitors for High-Power-Density Electric Vehicle Drive Systems
Wen, H., Xiao, W., Wen, X., & Armstrong, P. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2206082 · Cited by 271
On the Concept of the Multi-Source Inverter for Hybrid Electric Vehicle Powertrains
Dorn-Gomba, L., Magne, P., Danen, B., & Emadi, A. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2765247 · Cited by 102
Tai, B., Gao, C., Liu, X., & Chen, Z. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2535463 · Cited by 46
Metadata
- Authors
- Peng, F. Z., Shen, M., & Holland, K.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2007-05
- Volume
- 22
- Issue
- 3
- Pages
- 1054-1061
- ISSN
- 0885-8993 (ISSN-L)
- OpenAlex
- W2128624488
- Cited by
- 370
- References
- 5
- FWCI
- 40.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.