The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
A Bidirectional DC–DC Converter for an Energy Storage System With Galvanic Isolation
Abstract
This paper addresses a bidirectional dc-dc converter suitable for an energy storage system with an additional function of galvanic isolation. An energy storage device such as an electric double layer capacitor is directly connected to a dc side of the dc-dc converter without any chopper circuit. Nevertheless, the dc-dc converter can continue operating when the voltage across the energy storage device drops along with its discharge. Theoretical calculation and experimental measurement reveal that power loss and peak current impose limitations on a permissible dc-voltage range. This information may be useful in design of the dc-dc converter. Experimental results verify proper charging and discharging operation obtained from a 200-V, 2.6-kJ laboratory model of the energy storage system. Moreover, the dc-dc converter can charge the capacitor bank from zero to the rated voltage without any external precharging circuit.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Power electronics converters, applications and design
Robinson, F. V. P. (1997) · Microelectronics Journal · doi:10.1016/s0026-2692(97)87859-7 · Cited by 5,075
Power Electronics: Converters, Applications and Design
Mohan, N., Undeland, T. M., & Robbins, W. P. (1989) · Cited by 4,771
Rashid, R. (1988) · Cited by 2,662
A three-phase soft-switched high-power-density DC/DC converter for high-power applications
De Doncker, R. W. A. A., Divan, D. M., & Kheraluwala, M. H. (1991) · IEEE Transactions on Industry Applications · doi:10.1109/28.67533 · Cited by 2,535
Performance characterization of a high-power dual active bridge DC-to-DC converter
Kheraluwala, M. N., Gascoigne, R. W., Divan, D. M., & Baumann, E. D. (1992) · IEEE Transactions on Industry Applications · doi:10.1109/28.175280 · Cited by 1,496
Energy storage systems for advanced power applications
Ribeiro, P. F., Johnson, B. K., Crow, M. L., Arsoy, A., & Liu, Y. (2001) · Proceedings of the IEEE · doi:10.1109/5.975900 · Cited by 1,058
A new ZVS bidirectional DC-DC converter for fuel cell and battery application
Peng, F. Z., Li, H., Su, G.-J., & Lawler, J. S. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.820550 · Cited by 782
Inoue, S., & Akagi, H. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.889939 · Cited by 669
Self-citationThree-Port Bidirectional Converter for Hybrid Fuel Cell Systems
Duarte, J. L., Hendrix, M., & Simoes, M. G. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.889928 · Cited by 441
Zhu, L. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2005.869730 · Cited by 381
A bidirectional DC–DC converter for fuel cell electric vehicle driving system
Chiu, H.-J., & Lin, L.-W. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.876863 · Cited by 327
A bidirectional DC-DC converter topology for low power application
Jain, M., Daniele, M., & Jain, P. K. (2000) · IEEE Transactions on Power Electronics · doi:10.1109/63.849029 · Cited by 256
Kinjo, T., Senjyu, T. S., Urasaki, N., et al. (2006) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2005.853752 · Cited by 236
A Practical, Accurate and Very General Core Loss Model for Nonsinusoidal Waveforms
Roshen, W. A. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.886608 · Cited by 232 · cited 1×
“Further detailed analysis, for example, as found in [16], should bring an improvement of accuracy to the core-loss calculation although it is out of the scope of this paper.”
BackgroundA bi-directional DC-DC converter topology for low power application
Jain, M., Jain, P. K., & Daniele, M. (2002) · PESC97. Record 28th Annual IEEE Power Electronics Specialists Conference. Formerly Power Conditioning Specialists Conference 1970-71. Power Processing and Electronic Specialists Conference 1972 · doi:10.1109/pesc.1997.616811 · Cited by 205
Hu, Y., Tatler, J., & Chen, Z. (2004) · VBN Forskningsportal (Aalborg Universitet) · Cited by 44
Operating Voltage and Loss Analysis of a Bi-Directional Isolated DC/DC Converter
Inoue, S., & Akagi, H. (2007) · IEEJ Transactions on Industry Applications · doi:10.1541/ieejias.127.189 · Cited by 28
Self-citationSwingler, A., & Dunford, W. G. (2003) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/psec.2002.1022579 · Cited by 28
Optimal Design and Control of 5kW PWM plus Phase-Shift (PPS) Control Bidirectional dc-dc Converter
Shi, L., Sun, L., Xu, D., & Chen, M. (2006) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2006.1620522 · Cited by 9
Cited by
Zhao, B., Song, Q., Liu, W., & Sun, Y. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2289913 · Cited by 1,886
Zhao, B., Yu, Q., & Sun, W. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2180928 · Cited by 932
Jung, J.-H., Kim, H.-S., Ryu, M.-H., & Baek, J.-W. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2213346 · Cited by 621
Pwm control of dual active bridge: Comprehensive analysis and experimental verification
Jain, A. K., & Ayyanar, R. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2070519 · Cited by 567
Hou, N., & Li, Y. W. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2927930 · Cited by 553
Metadata
- Authors
- Inoue, S., & Akagi, H.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2007-11
- Volume
- 22
- Issue
- 6
- Pages
- 2299-2306
- ISSN
- 0885-8993 (ISSN-L)
- OpenAlex
- W2167459638
- Cited by
- 780
- References
- 19
- FWCI
- 16.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.