The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
A Novel Low-Loss Modulation Strategy for High-Power Bidirectional Buck ${\bm +}$ Boost Converters
Abstract
A novel, low-loss, constant-frequency, zero-voltage-switching (ZVS) modulation strategy for bidirectional, cascaded, buck-boost DC-DC converters, used in hybrid electrical vehicles or fuel cell vehicles (FCVs), is presented and its benefits over state-of-the-art converters and soft-switching solutions are discussed in a comparative evaluation. To obtain ZVS with the proposed modulation strategy, the buck+boost inductance is selected and the switches are gated in a way that the inductor current has a negative offset current at the beginning and the end of each pulse period. This allows the MOSFET switches to turn on when the antiparallel body diode is conducting. As the novel modulation strategy is a software-only solution, there are no additional expenses for the active or passive components compared to conventional modulation implementations. Furthermore, an analytical and simulation investigation predicts an excellent efficiency over the complete operating range and a higher power density for a nonisolated multiphase converter equipped with the low-loss modulation. Experimental measurements performed with 12 kW, 17.4 kW/L prototypes in stand-alone and multiphase configuration verify the low-loss operation over a wide output power range and a maximum efficiency of 98.3% is achieved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A new ZVS bidirectional DC-DC converter for fuel cell and battery application
Peng, F. Z., Li, H., Su, G.-J., & Lawler, J. S. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.820550 · Cited by 782
Emadi, A., Williamson, S. S., & Khaligh, A. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.872378 · Cited by 714
Automotive DC-DC bidirectional converter made with many interleaved buck stages
Garcia, O., Zumel, P., de Castro, A., & Cobos, A. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.872379 · Cited by 405
Resonant snubbers with auxiliary switches
McMurray, W. (1993) · IEEE Transactions on Industry Applications · doi:10.1109/28.216544 · Cited by 313
Comparing DC-DC converters for power management in hybrid electric vehicles
Schupbach, R. M., & Balda, J. C. (2003) · IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03. · doi:10.1109/iemdc.2003.1210630 · Cited by 244
Williamson, S., Lukic, M., & Emadi, A. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.872388 · Cited by 199
PWM Converter Power Density Barriers
Kolar, J. W., Drofenik, U., Biela, J., Heldwein, M. L., Ertl, H., Friedli, T., & Round, S. D. (2008) · IEEJ Transactions on Industry Applications · doi:10.1541/ieejias.128.468 · Cited by 100
Self-citationCaricchi, F., Crescimbini, F., & Napoli, A. D. (2002) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.1995.469045 · Cited by 71
A novel low-loss modulation strategy for high-power bi-directional buck+boost converters
Waffler, S., & Kolar, J. W. (2007) · doi:10.1109/icpe.2007.4692513 · Cited by 54
Self-citationAutomotive Powertrain DC/DC Converter with 25kW/dm(exp3) by using SiC Diodes
Eckardt, B., Hofmann, A., Zeltner, S., et al. (2006) · Cited by 47
Design of resonant circuit for zero-current-transition techniques in 100-kW PEBB applications
Solero, L., Boroyevich, D., Li, Y. P., & Lee, F. C. (2003) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2003.819437 · Cited by 27
A New High Efficiency ZVZCS Bi-directional DC/DC Converter for 42V Power System of HEVs
Kim, C.-E., Han, S.-K., Yi, K.-H., Lee, W.-J., & Moon, G. (2006) · IEEE Power Electronics Specialists Conference (PESC) · doi:10.1109/pesc.2005.1581717 · Cited by 17
A 100kW automotive powertrain DC/DC converter with 25 kW/dm3 by using SiC
Eckardt, B., & März, M. (2006) · Publikationsdatenbank der Fraunhofer-Gesellschaft (Fraunhofer-Gesellschaft) · Cited by 12
Cited by
Biela, J., Schweizer, M., Waffler, S., & Kolar, J. W. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2072896 · Cited by 892
Self-citationOggier, G. G., Garcia, G. O., & Oliva, A. R. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2072966 · Cited by 498
A Review of Power Electronics for Grid Connection of Utility-Scale Battery Energy Storage Systems
Wang, G., Konstantinou, G., Townsend, C. D., Pou, J., Vazquez, S., Demetriades, G. D., & Agelidis, V. G. (2016) · IEEE Transactions on Sustainable Energy · doi:10.1109/tste.2016.2586941 · Cited by 362
Raghavendra, K. V. G., Zeb, K., Muthusamy, A., Krishna, T. N. V., Kumar, S. V. S. V. P., Kim, D.-H., Kim, M.-S., Cho, H.-G., & Kim, H.-J. (2019) · Electronics · doi:10.3390/electronics9010031 · Cited by 269
A review of non-isolated bidirectional dc-dc converters for energy storage systems
Tytelmaier, K., Husev, O., Veligorskyi, O., & Yershov, R. (2016) · 2016 II International Young Scientists Forum on Applied Physics and Engineering (YSF) · doi:10.1109/ysf.2016.7753752 · Cited by 174
Metadata
- Authors
- Waffler, S., & Kolar, J. W.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2009-06
- Volume
- 24
- Issue
- 6
- Pages
- 1589-1599
- ISSN
- 0885-8993 (ISSN-L)
- OpenAlex
- W2123780398
- Cited by
- 276
- References
- 13
- FWCI
- 9.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.