A Fast Loss and Temperature Simulation Method for Power Converters, Part II: 3-D Thermal Model of Power Module
The DOI matches its Crossref record.
Abstract
This paper describes the development and implementation of an analytical 3-D thermal model for fast and accurate thermal simulation of power device modules in electrothermal converter simulation. A Fourier-based solution is used to solve the 3-D heat equation. The solution can describe the variation of temperature through the whole inverter power module structure as a function of time. The model can simulate thermal interactions resulting from multiple heat sources. The thermal model is extremely fast to simulate compared to finite-element (FEM) approaches. The new model has been implemented in MATLAB/Simulink in order to cosimulate with the converter model which is in the same form. The model has been validated against the computational fluid dynamics (CFD) software package FLOTHERM and shows good agreement. The required aspects of 3-D heat diffusion are captured successfully by the Fourier-based model.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Complete Loss and Thermal Model of Power Semiconductors Including Device Rating Information
Ma, K., Bahman, A. S., Beczkowski, S., & Blaabjerg, F. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2352341 · Cited by 199
“The thermal models proposed in this paper are verified by Finite Element Methods FEM simulations in ANSYS Icepack, which can accurately simulate the thermal behaviors of power device considering the geometries, materials, and operating conditions in three dimensions [21].”
MethodA Physical RC Network Model for Electrothermal Analysis of a Multichip SiC Power Module
Li, J., Castellazzi, A., Eleffendi, M. A., Gurpinar, E., Johnson, C. M., & Mills, L. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2697959 · Cited by 105
Dynamic Electrothermal Model of Paralleled IGBT Modules With Unbalanced Stray Parameters
Tang, Y., & Ma, H. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2542198 · Cited by 66
Review of SiC MOSFET based three-phase inverter lifetime prediction
Ni, Z., Lyu, X., Yadav, O. P., & Cao, D. (2017) · 2017 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2017.7930819 · Cited by 40
“Fast calculation and simulation speed No accurate estimation about the heat spreading effect in the material [50][51][52]”
BackgroundIslam, M. M., Rahman, M. A., & Islam, M. R. (2021) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2020.3000596 · Cited by 16
Metadata
- Authors
- Swan, I., Bryant, A., Mawby, P. A., Ueta, T., Nishijima, T., & Hamada, K.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2012-01
- Volume
- 27
- Issue
- 1
- Pages
- 258-268
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2058404321
- Cited by
- 87
- References
- 0
- FWCI
- 3.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.