The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Closed Form Solution for Minimum Conduction Loss Modulation of DAB Converters
Abstract
An optimal modulation scheme that enables minimum conduction and copper losses is presented for a bidirectional dual active bridge (DAB) dc-dc converter. The considered converter system is employed for an automotive application and comprises of a high voltage (HV) port with port voltageV1, 240V ≤V1≤ 450 V, and a low voltage (LV) port with port voltageV2, 11 V ≤V2≤ 16 V; the rated output power is 2 kW. The closed-form expressions for the optimal control parameters are derived and implementation details are presented in order to facilitate the direct application to a given DAB converter. The paper further details the properties of the presented modulation scheme with respect to switching losses. Experimental results confirm a considerable increase of the converter efficiency achieved with the proposed optimal modulation scheme, compared to the efficiency obtained with conventional phase shift modulation. The efficiency increase is most distinct atV1=450V andV2= 11V with an increase from 78.6% to 90.6% at 1 kW output power and from 85.9% to 90.7% at rated output power as compared to conventional phase shift modulation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A three-phase soft-switched high-power-density DC/DC converter for high-power applications
De Doncker, R. W. A. A., Divan, D. M., & Kheraluwala, M. H. (1991) · IEEE Transactions on Industry Applications · doi:10.1109/28.67533 · Cited by 2,535
Performance characterization of a high-power dual active bridge DC-to-DC converter
Kheraluwala, M. N., Gascoigne, R. W., Divan, D. M., & Baumann, E. D. (1992) · IEEE Transactions on Industry Applications · doi:10.1109/28.175280 · Cited by 1,496
Bai, H., & Mi, C. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2008.2005103 · Cited by 1,121
Efficiency-Optimized High-Current Dual Active Bridge Converter for Automotive Applications
Krismer, F., & Kolar, J. W. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2112312 · Cited by 747
Self-citationPwm control of dual active bridge: Comprehensive analysis and experimental verification
Jain, A. K., & Ayyanar, R. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2070519 · Cited by 567
Switching Control Strategy to Minimize Dual Active Bridge Converter Losses
Oggier, G. G., GarcÍa, G. O., & Oliva, A. R. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2020902 · Cited by 514
Oggier, G. G., Garcia, G. O., & Oliva, A. R. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2072966 · Cited by 498
Transformer-Coupled Multiport ZVS Bidirectional DC–DC Converter With Wide Input Range
Tao, H., Kotsopoulos, A., Duarte, J. L., & Hendrix, M. A. M. (2008) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.915129 · Cited by 478
Krismer, F., & Kolar, J. W. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2025284 · Cited by 470
Self-citationKrismer, F., & Kolar, J. W. (2009) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2027904 · Cited by 421
Self-citationBai, H., Nie, Z., & Mi, C. C. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2039648 · Cited by 314
Zhou, H., & Khambadkone, A. M. (2009) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2009.2023493 · Cited by 283
Performance optimization of a high current dual active bridge with a wide operating voltage range
Krismer, F., Round, S., & Kolar, J. W. (2006) · 2006 37th IEEE Power Electronics Specialists Conference · doi:10.1109/pesc.2006.1712096 · Cited by 276
Self-citationA three-phase soft-switched high power density DC/DC converter for high power applications
De Doncker, R. W., Divan, D. M., & Kheraluwala, M. H. (2003) · Conference Record of the 1988 IEEE Industry Applications Society Annual Meeting · doi:10.1109/ias.1988.25153 · Cited by 256
Xie, Y., Sun, J., & Freudenberg, J. S. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2024151 · Cited by 250
A comparison of high-power DC-DC soft-switched converter topologies
Steigerwald, R. L., De Doncker, R. W., & Kheraluwala, H. (1996) · IEEE Transactions on Industry Applications · doi:10.1109/28.536876 · Cited by 231
Symmetrical multilevel converters with two quadrant DC-DC feeding
Schibli, N. (2000) · reroDoc Digital Library · doi:10.5075/epfl-thesis-2220 · Cited by 135
Guidi, G., Pavlovsky, M., Kawamura, A., Imakubo, T., & Sasaki, Y. (2010) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2010.5617909 · Cited by 94
Optimal operating ranges of three modulation methods in dual active bridge converters
Wang, Y., de Haan, S. W. H., & Ferreira, J. A. (2009) · International Power Electronics and Motion Control Conference (EPE-PEMC) · doi:10.1109/ipemc.2009.5157602 · Cited by 86
Efficient high-frequency soft-switched power converter with signal processor control
Vangen, K., Melaa, T., Bergsmark, S., & Nilsen, R. (2002) · International Telecommunications Energy Conference (INTELEC) · doi:10.1109/intlec.1991.172460 · Cited by 77
Bidirectional DC-DC converter for aircraft electric energy storage systems
Naayagi, R. T., & Forsyth, A. J. (2010) · IET International Conference on Power Electronics, Machines and Drives (PEMD) · doi:10.1049/cp.2010.0184 · Cited by 43
Accurate small-signal model for an automotive bidirectional Dual Active Bridge converter
Krismer, F., & Kolar, J. W. (2008) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/compel.2008.4634699 · Cited by 42
Self-citationAn extended load range ZCS-ZVS bi-directional phase-shifted DC-DC converter
Chan, H. L. (2000) · International Conference on Power Electronics and Variable Speed Drives (PEVD) · doi:10.1049/cp:20000223 · Cited by 23
Design of low-profile nanocrystalline transformer in high-current phase-shifted DC-DC converter
Wang, Y., de Haan, S. W. H., & Ferreira, J. A. (2010) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2010.5617809 · Cited by 23
Methods for experimental assessment of component losses to validate the converter loss model
Wang, Y., de Haan, S. W. H., & Ferreira, J. A. (2008) · doi:10.1109/epepemc.2008.4635265 · Cited by 12
Performance Considerations of a Bi-Directional DC/DC Converter for Fuel Cell Powered Vehicles
Flohr, G. R. (2002) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2002-01-1902 · Cited by 6
Cited by
Zhao, B., Song, Q., Liu, W., & Sun, Y. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2289913 · Cited by 1,886
Hou, N., & Li, Y. W. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2927930 · Cited by 553
Optimal ZVS Modulation of Single-Phase Single-Stage Bidirectional DAB AC–DC Converters
Everts, J., Krismer, F., Van den Keybus, J., Driesen, J., & Kolar, J. W. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2292026 · Cited by 501
Self-citationHuang, J., Wang, Y., Li, Z., & Lei, W. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2543182 · Cited by 501
Tong, A., Hang, L., Li, G., Jiang, X., & Gao, S. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2692276 · Cited by 455
Metadata
- Authors
- Krismer, F., & Kolar, J. W.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2012-01
- Volume
- 27
- Issue
- 1
- Pages
- 174-188
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2014599897
- Cited by
- 635
- References
- 26
- FWCI
- 10.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.