Detection of Airgap Eccentricity for Permanent Magnet Synchronous Motors Based on the d-Axis Inductance
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The majority of the work performed for detecting eccentricity faults for permanent magnet synchronous motors (PMSM) focus on motor current signature analysis (MCSA), as it provides continuous online monitoring with existing current sensors. However, MCSA cannot be applied under nonstationary conditions and cannot distinguish faults with load torque oscillations, which are limitations for many PMSM drive applications. In this paper, it is shown that the d-axis inductance L$_d$decreases with an increase in the severity of eccentricity due to the change in the degree of magnetic saturation, and it is proposed as a new fault indicator. The inverter can be used to perform a standstill test automatically whenever the motor is stopped to measure L$_d$for eccentricity testing independent of load variations or oscillations, which is not possible with MCSA. An finite element and experimental study on a 10-hp PMSM verifies that eccentricity can be detected independent of the load with high sensitivity and reliability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Condition Monitoring for Device Reliability in Power Electronic Converters: A Review
Yang, S., Xiang, D., Bryant, A., Mawby, P., Ran, L., & Tavner, P. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2049377 · Cited by 1,278
Rajagopalan, S., Roux, W. L., Habetler, T. G., & Harley, R. G. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.904183 · Cited by 164
Research works printed but not linked: 22
- 10.1109/TPEL.2010.2060361 · DOI
- 10.1109/TPEL.2010.2059713 · DOI · Paper page
- 10.1109/TPEL.2010.2062200 · DOI
- hendershot, 1994, Design of brushless permanent-magnet motors
- hanselman, 2001, Brushless Permanent Magnet Motor Design
- 10.1049/ip-b.1986.0022 · DOI · Paper page
- 10.1109/60.937205 · DOI · Paper page
- 10.1109/TIA.2009.2031888 · DOI
- 10.1109/TPEL.2007.900542 · DOI
- 10.1109/DEMPED.2007.4393076 · doi:10.1109/demped.2007.4393076
- 10.1109/DEMPED.2007.4393077 · DOI
- 10.1049/iet-epa.2009.0149 · DOI · Paper page
- 10.1109/TEC.2009.2037922 · DOI · Paper page
- 10.1109/TIA.2006.882613 · DOI · Paper page
- 10.1109/TPEL.2010.2050496 · DOI · Paper page
- 10.1109/TIA.2010.2049811 · DOI · Paper page
- 10.1109/TPEL.2006.886620 · DOI · Paper page
- 10.1109/IAS.1995.530283 · doi:10.1109/ias.1995.530283
- 10.1109/28.536878 · doi:10.1109/28.536878
- 10.1109/IAS.1994.345475 · doi:10.1109/ias.1994.345475
- 10.1109/TIA.2003.811789 · DOI · Paper page
- schmidt, 1997, Initial rotor angle detection of a non-salient pole permanent magnet synchronous machine, Conf Rec 36th IEEE Ind Appl Soc Annu Meet Ind Appl Conf, 459
Cited by
Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges
Orlowska-Kowalska, T., Wolkiewicz, M., Pietrzak, P., Skowron, M., Ewert, P., Tarchala, G., Krzysztofiak, M., & Kowalski, C. T. (2022) · IEEE Access · doi:10.1109/access.2022.3180153 · Cited by 328
“The basic diagnostic signals in eccentricity diagnosis are: stator current [135], [143]-[146], [150], [151], [156]-[159], [161], [162], mechanical vibrations [149], [155], [156], noise [155], an airgap search coil voltage [149], [152], [156], [160], stator voltage [159], speed [159], load torque [159], d-axis stator i…”
BackgroundMethodInfluentialDa, Y., Shi, X., & Krishnamurthy, M. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2227808 · Cited by 303
Choi, S., Haque, M. S., Tarek, M. T. B., Mulpuri, V., Duan, Y., Das, S., Garg, V., Ionel, D. M., Masrur, M. A., Mirafzal, B., et al. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2819627 · Cited by 192
Change‐detection algorithm for short‐circuit fault detection in closed‐loop AC drives
Meinguet, F., Semail, E., Kestelyn, X., Mollet, Y., & Gyselinck, J. (2014) · IET Electric Power Applications · doi:10.1049/iet-epa.2012.0316 · Cited by 34
“The most common methods reported in the literature are: current-based techniques [8-16], electromotive force- or voltage-based techniques [17-21], power-based techniques [22] and parameter estimation [23, 24].”
Method
Metadata
- Authors
- Hong, J., Lee, S. B., Kral, C., & Haumer, A.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2012-05
- Volume
- 27
- Issue
- 5
- Pages
- 2605-2612
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2127480543
- Cited by
- 103
- References
- 2
- FWCI
- 4.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.