The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Differential Power Processing for Increased Energy Production and Reliability of Photovoltaic Systems
Abstract
Conventional energy conversion architectures in photovoltaic (PV) systems are often forced to tradeoff conversion efficiency and power production. This paper introduces an energy conversion approach that enables each PV element to operate at its maximum power point (MPP) while processing only a small fraction of the total power produced. This is accomplished by providing only the mismatch in the MPP current of a set of series-connected PV elements. Differential power processing increases overall conversion efficiency and overcomes the challenges associated with unmatched MPPs (due to partial shading, damage, manufacturing tolerances, etc.). Several differential power processing architectures are analyzed and compared with Monte Carlo simulations. Local control of the differential converters enables distributed protection and monitoring. Reliability analysis shows significantly increased overall system reliability. Simulation and experimental results are included to demonstrate the benefits of this approach at both the panel and subpanel level.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Comparison of Photovoltaic Array Maximum Power Point Tracking Techniques
Esram, T., & Chapman, P. L. (2007) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2006.874230 · Cited by 5,425
System Reliability Theory: Models, Statistical Methods, and Applications
Rausand, M., Barros, A., & Hoyland, A. (2020) · Wiley Series in Probability and Statistics · doi:10.1002/9781119373940 · Cited by 1,471
System Reliability Theory: Models, Statistical Methods, and Applications
Ziegel, E. R. (2004) · Technometrics · doi:10.1198/tech.2004.s242 · Cited by 1,465
A manual for the economic evaluation of energy efficiency and renewable energy technologies
Short, W., Packey, D. J., & Holt, T. (1995) · doi:10.2172/35391 · Cited by 1,075
Cascaded DC–DC Converter Connection of Photovoltaic Modules
Walker, G. R., & Sernia, P. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2004.830090 · Cited by 1,032
Krein, P. T., Balog, R. S., & Mirjafari, M. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2186640 · Cited by 520
Self-citationLong-Lifetime Power Inverter for Photovoltaic AC Modules
Rodriguez, C., & Amaratunga, G. A. J. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.922401 · Cited by 258
Krein, P. T., & Balog, R. S. (2009) · 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2009.4802723 · Cited by 186
Self-citationPoshtkouhi, S., Biswas, A., & Trescases, O. (2012) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2012.6165802 · Cited by 77
Cited by
Forouzesh, M., Siwakoti, Y. P., Gorji, S. A., Blaabjerg, F., & Lehman, B. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2652318 · Cited by 2,123
A Digital Twin Approach for Fault Diagnosis in Distributed Photovoltaic Systems
Jain, P., Poon, J., Singh, J. P., Spanos, C., Sanders, S. R., & Panda, S. K. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2911594 · Cited by 462
Grid-Connected Photovoltaic Generation Plants: Components and Operation
Romero-Cadaval, E., Spagnuolo, G., Franquelo, L. G., Ramos-Paja, C. A., Suntio, T., & Xiao, W. M. (2013) · IEEE Industrial Electronics Magazine · doi:10.1109/mie.2013.2264540 · Cited by 449
Low-Voltage Ride-Through of Single-Phase Transformerless Photovoltaic Inverters
Yang, Y., Blaabjerg, F., & Wang, H. (2014) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2013.2282966 · Cited by 358
Classification and Comparative Evaluation of PV Panel-Integrated DC–DC Converter Concepts
Kasper, M., Bortis, D., & Kolar, J. W. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2273399 · Cited by 332
Hossain, M. Z., Rahim, N. A., & Selvaraj, J. A. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.07.017 · Cited by 305
Overview of Real-Time Lifetime Prediction and Extension for SiC Power Converters
Ni, Z., Lyu, X., Yadav, O. P., Singh, B. N., Zheng, S., & Cao, D. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2962503 · Cited by 261
Dutta, S., & Bauman, J. (2024) · IEEE Access · doi:10.1109/access.2024.3435463 · Cited by 37
“Reference [61] proposes a low cost and modular onboard charger DC/DC topology incorporating differential power processing [60], [62], [63] for high efficiency and power density, as shown in Fig.”
Metadata
- Authors
- Shenoy, P. S., Kim, K. A., Johnson, B. B., & Krein, P. T.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2013-06
- Volume
- 28
- Issue
- 6
- Pages
- 2968-2979
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2167603547
- Cited by
- 460
- References
- 9
- FWCI
- 13.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.