A Zero-Voltage Switching Full-Bridge DC--DC Converter With Capacitive Output Filter for Plug-In Hybrid Electric Vehicle Battery Charging
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
In this paper, a novel zero-voltage switching full-bridge converter with trailing edge pulse width modulation and capacitive output filter is presented. The target application for this study is the second stage dc-dc converter in a two stage 1.65 kW on-board charger for a plug-in hybrid electric vehicle. For this application the design objective is to achieve high efficiency and low cost in order to minimize the charger size, charging time, and the amount and the cost of electricity drawn from the utility. A detailed converter operation analysis is presented along with simulation and experimental results. In comparison to a benchmark full-bridge with an LC output filter, the proposed converter reduces the reverse recovery losses in the secondary rectifier diodes, therefore, enabling a converter switching frequency of 100 kHz. Experimental results are presented for a prototype unit converting 400 V from the input dc link to an output voltage range of 200-450 V dc at 1650 W. The prototype achieves a peak efficiency of 95.7%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Khaligh, A., & Li, Z. (2010) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2010.2047877 · Cited by 1,817
A Review of Three-Phase Improved Power Quality AC–DC Converters
Singh, B., Singh, B. N., Chandra, A., Al-Haddad, K., Pandey, A., & Kothari, D. P. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2004.825341 · Cited by 1,728
A review of single-phase improved power quality ac~dc converters
Singh, B., Singh, B. N., Chandra, A., Al-Haddad, K., Pandey, A., & Kothari, D. P. (2003) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.817609 · Cited by 1,297
Advanced Integrated Bidirectional AC/DC and DC/DC Converter for Plug-In Hybrid Electric Vehicles
Lee, Y.-J., Khaligh, A., & Emadi, A. (2009) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2009.2028070 · Cited by 476
Cited by
Extreme Fast Charging of Electric Vehicles: A Technology Overview
Tu, H., Feng, H., Srdic, S., & Lukic, S. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2019.2958709 · Cited by 898
800-V Electric Vehicle Powertrains: Review and Analysis of Benefits, Challenges, and Future Trends
Aghabali, I., Bauman, J., Kollmeyer, P. J., Wang, Y., Bilgin, B., & Emadi, A. (2021) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3044938 · Cited by 434
Rajendran, G., Vaithilingam, C. A., Misron, N., Naidu, K., & Ahmed, M. R. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103099 · Cited by 247
Shen, Y., Zhao, W., Chen, Z., & Cai, C. (2018) · IEEE Access · doi:10.1109/access.2018.2811760 · Cited by 157
“The output voltage of the PSFB converter can be regulated by using phase-shift control in a wide voltage range, but it is hard to realize ZVS for the lagging leg switches in light loads condition and there are the problem of duty cycle losses of secondary side [9], [10].”
Background
Metadata
- Authors
- Gautam, D. S., Musavi, F., Eberle, W., & Dunford, W. G.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2013-12
- Volume
- 28
- Issue
- 12
- Pages
- 5728-5735
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2063087516
- Cited by
- 130
- References
- 4
- FWCI
- 7.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Zero-Voltage Switching Full-Bridge DC--DC Converter With Capacitive Output Filter for Plug-In Hybrid Electric Vehicle Battery Charging. https://app.cochat.ai/papers/10.1109/tpel.2013.2249671
- The paper
- Gautam, D. S., Musavi, F., Eberle, W., & Dunford, W. G. (2013). A Zero-Voltage Switching Full-Bridge DC--DC Converter With Capacitive Output Filter for Plug-In Hybrid Electric Vehicle Battery Charging. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2013.2249671
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.