Dynamic Modeling Method of Electro-Thermo-Mechanical Degradation in IGBT Modules
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
A degradation model investigating the electro-thermo-mechanical fatigue, experienced by insulated gate bipolar transistors modules, is presented. To illustrate the concept, a specific case of power modules subjected to active power cycling which induce failure through bond wire lift-off is considered. Bond wire lift-off is believed to be due to thermally induced stress arising from a mismatch in the coefficients of thermal expansion between the wires and the given substrate. Overall, the theoretical evaluation is based on determining the thermo-mechanical stress around the bond wire/substrate interface through multiphysics-based models. The simulation detail and included equations are specified according to the region of interest and their complexity. In common, however, is the use of the finite element method combined with empirical equations. The final result is a numerical approach to evaluate the damage accumulated by a given load which may be used for prediction of lifetime or optimization of work points and module geometry.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Selected failure mechanisms of modern power modules
Ciappa, M. (2002) · Microelectronics Reliability · doi:10.1016/s0026-2714(02)00042-2 · Cited by 1,039
Thermal conduction in doped single-crystal silicon films
Asheghi, M., Kurabayashi, K., Kasnavi, R., & Goodson, K. E. (2002) · Journal of Applied Physics · doi:10.1063/1.1458057 · Cited by 469
Smet, V., Forest, F., Huselstein, J.-J., Rashed, A., & Richardeau, F. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2196894 · Cited by 232
Cited by
Overview of Real-Time Lifetime Prediction and Extension for SiC Power Converters
Ni, Z., Lyu, X., Yadav, O. P., Singh, B. N., Zheng, S., & Cao, D. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2962503 · Cited by 261
Dorn-Gomba, L., Ramoul, J., Reimers, J., & Emadi, A. (2020) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3006045 · Cited by 185
“calculate the component failure rate [72], [73].”
Methodology for Active Thermal Cycle Reduction of Power Electronic Modules
van der Broeck, C. H., Ruppert, L. A., Lorenz, R. D., & De Doncker, R. W. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2882184 · Cited by 85
Pressureless Sintered-Silver Die-Attach at 180 °C for Power Electronics Packaging
Wang, M., Mei, Y.-H., Jin, J., Chen, S., Li, X., & Lu, G.-Q. (2021) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2021.3074853 · Cited by 69
“sintering process, as well as the greater thermal and mechanical damage to the whole package, especially the molding materials [5].”
BackgroundHu, B., Konaklieva, S., Kourra, N., Williams, M. A., Ran, L., & Lai, W. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2019.2958737 · Cited by 46
Metadata
- Authors
- Pedersen, K. B., & Pedersen, K.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2016-02
- Volume
- 31
- Issue
- 2
- Pages
- 975-986
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W1994465562
- Cited by
- 99
- References
- 3
- FWCI
- 4.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Dynamic Modeling Method of Electro-Thermo-Mechanical Degradation in IGBT Modules. https://app.cochat.ai/papers/10.1109/tpel.2015.2426013
- The paper
- Pedersen, K. B., & Pedersen, K. (2016). Dynamic Modeling Method of Electro-Thermo-Mechanical Degradation in IGBT Modules. IEEE Transactions on Power Electronics. https://doi.org/10.1109/tpel.2015.2426013
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.