A Bidirectional Battery Charger With Modular Integrated Charge Equalization Circuit
The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
High-voltage battery pack and charger structure are the main concerns of the electric vehicle (EV) developments. To achieve required voltage and power in propulsion systems, cascading battery stacks is essential. However, due to small discrepancies between different cells, charge imbalance occurs. Charge imbalance reduces battery cells life cycle, accessible energy, and system performance. Hence, charge equalization among battery stacks is necessary. Furthermore, EVs should have some essential requirements to provide desired contributions in future networks. Therefore, bidirectional power flow and reactive power control are other important capabilities of the battery charger system. In this paper, a bidirectional structure with two operation modes for a modular battery stack is developed. The developed structure has active and reactive control capabilities during grid to vehicle and vehicle to grid operations. To improve the battery system performance, a modular charge equalizer circuit (CEC) for both operation modes is developed. The modular configuration of the battery stack improves the system reliability and flexibility. Moreover, the overall system performance for the CEC and converter is improved by utilizing the integrated control strategy. Performance of the proposed structure is evaluated using simulations and laboratory experiments. The results confirm the capability of the proposed structure.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on the key issues for lithium-ion battery management in electric vehicles
Lu, L., Han, X., Li, J., Hua, J., & Ouyang, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.060 · Cited by 4,837 · cited 2×
“Due to the inherent charge balancing feature in a parallel connection, no charge imbalance occurs between paralleled battery cells or modules [9].”
BackgroundYilmaz, M., & Krein, P. T. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2212917 · Cited by 3,118 · cited 4×
“Without a doubt, the main obstacles in EV advancement are high-voltage battery system and charger structure [3], [4].”
BackgroundInfluentialThe Impact of Charging Plug-In Hybrid Electric Vehicles on a Residential Distribution Grid
Clement-Nyns, K., Haesen, E., & Driesen, J. (2010) · IEEE Transactions on Power Systems · doi:10.1109/tpwrs.2009.2036481 · Cited by 2,847
A Review of Three-Phase Improved Power Quality AC–DC Converters
Singh, B., Singh, B. N., Chandra, A., Al-Haddad, K., Pandey, A., & Kothari, D. P. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2004.825341 · Cited by 1,728
A review of single-phase improved power quality ac~dc converters
Singh, B., Singh, B. N., Chandra, A., Al-Haddad, K., Pandey, A., & Kothari, D. P. (2003) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.817609 · Cited by 1,297
Khaligh, A., & Dusmez, S. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2213104 · Cited by 630
Single-Phase On-Board Bidirectional PEV Charger for V2G Reactive Power Operation
Kisacikoglu, M. C., Kesler, M., & Tolbert, L. M. (2015) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2014.2360685 · Cited by 381
Du, Y., Zhou, X., Bai, S., Lukic, S., & Huang, A. (2010) · 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2010.5433359 · Cited by 314 · cited 1×
“There are many converter topologies with different capabilities, which can be used for the EV battery charger structures [15]–[21], but they usually consider battery pack as one large battery stack.”
BackgroundA Single-Phase Battery Charger Design for LEV Based on DC-SRC with Resonant Valley-Fill Circuit
Lee, J.-Y., Yoon, Y.-D., & Kang, J.-W. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2351371 · Cited by 44 · cited 3×
“In [21], a diode-clamped series resonant converter with resonant valley compensator is proposed.”
Background
Cited by
EVs for frequency regulation: cost benefit analysis in a smart grid environment
David, A. O., & Al‐Anbagi, I. (2017) · IET Electrical Systems in Transportation · doi:10.1049/iet-est.2017.0007 · Cited by 63
Muttaqi, K. M., Isac, E., Mandal, A., Sutanto, D., & Akter, S. (2024) · Electric Power Systems Research · doi:10.1016/j.epsr.2023.109899 · Cited by 57
Metadata
- Authors
- Tashakor, N., Farjah, E., & Ghanbari, T.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2017-03
- Volume
- 32
- Issue
- 3
- Pages
- 2133-2145
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2406785788
- Cited by
- 177
- References
- 9
- FWCI
- 13.39
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.